[PATCH v2 1/2] mmc: xenon: fix PHY init clock stability

From: Elad Nachman
Date: Thu Feb 15 2024 - 11:17:30 EST


From: Elad Nachman <enachman@xxxxxxxxxxx>

Each time SD/mmc phy is initialized, at times, in some of
the attempts, phy fails to completes its initialization
which results into timeout error. Per the HW spec, it is
a pre-requisite to ensure a stable SD clock before a phy
initialization is attempted.

Signed-off-by: Elad Nachman <enachman@xxxxxxxxxxx>
---
drivers/mmc/host/sdhci-xenon-phy.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
index 8cf3a375de65..c3096230a969 100644
--- a/drivers/mmc/host/sdhci-xenon-phy.c
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -11,6 +11,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/ktime.h>
+#include <linux/iopoll.h>
#include <linux/of_address.h>

#include "sdhci-pltfm.h"
@@ -216,6 +217,19 @@ static int xenon_alloc_emmc_phy(struct sdhci_host *host)
return 0;
}

+static int xenon_check_stability_internal_clk(struct sdhci_host *host)
+{
+ u32 reg;
+ int err;
+
+ err = read_poll_timeout(sdhci_readw, reg, reg & SDHCI_CLOCK_INT_STABLE,
+ 1100, 20000, false, host, SDHCI_CLOCK_CONTROL);
+ if (err)
+ dev_err(mmc_dev(host->mmc), "phy_init: Internal clock never stabilized.\n");
+
+ return err;
+}
+
/*
* eMMC 5.0/5.1 PHY init/re-init.
* eMMC PHY init should be executed after:
@@ -232,6 +246,11 @@ static int xenon_emmc_phy_init(struct sdhci_host *host)
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;

+ int ret = xenon_check_stability_internal_clk(host);
+
+ if (ret)
+ return ret;
+
reg = sdhci_readl(host, phy_regs->timing_adj);
reg |= XENON_PHY_INITIALIZAION;
sdhci_writel(host, reg, phy_regs->timing_adj);
--
2.25.1