Re: [PATCH] PCI: dwc: Use the correct sleep function in wait_for_link

[Kuppuswamy Sathyanarayanan]

On 2/15/24 2:39 AM, Konrad Dybcio wrote:
> According to [1], msleep should be used for large sleeps, such as the
> 100-ish ms one in this function. Comply with the guide and use it.
>
> [1] https://www.kernel.org/doc/Documentation/timers/timers-howto.txt
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
> Tested on Qualcomm SC8280XP CRD
> ---
>  drivers/pci/controller/dwc/pcie-designware.c | 2 +-
>  drivers/pci/controller/dwc/pcie-designware.h | 3 +--
>  2 files changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 250cf7f40b85..abce6afceb91 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -655,7 +655,7 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci)
>  		if (dw_pcie_link_up(pci))
>  			break;
>  
> -		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
> +		msleep(LINK_WAIT_MSLEEP_MAX);
>  	}
>  
>  	if (retries >= LINK_WAIT_MAX_RETRIES) {
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 26dae4837462..3f145d6a8a31 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -63,8 +63,7 @@
>  
>  /* Parameters for the waiting for link up routine */
>  #define LINK_WAIT_MAX_RETRIES		10
> -#define LINK_WAIT_USLEEP_MIN		90000
> -#define LINK_WAIT_USLEEP_MAX		100000
> +#define LINK_WAIT_MSLEEP_MAX		100

Since 90 ms is an acceptable value, why not use it?

>  
>  /* Parameters for the waiting for iATU enabled routine */
>  #define LINK_WAIT_MAX_IATU_RETRIES	5
>
> ---
> base-commit: 26d7d52b6253574d5b6fec16a93e1110d1489cef
> change-id: 20240215-topic-pci_sleep-368108a1fb6f
>
> Best regards,

-- 
Sathyanarayanan Kuppuswamy
Linux Kernel Developer