Re: [PATCH 1/2] drm/tidss: Fix initial plane zpos values

[Aradhya Bhatia]

Tomi, thank you for the fixes.

On 13/02/24 13:46, Tomi Valkeinen wrote:
> When the driver sets up the zpos property it sets the default zpos value
> to the HW id of the plane. That is fine as such, but as on many DSS
> versions the driver arranges the DRM planes in a different order than
> the HW planes (to keep the non-scalable planes first), this leads to odd
> initial zpos values. An example is J721e, where the initial zpos values
> for DRM planes are 1, 3, 0, 2.
> 
> In theory the userspace should configure the zpos values properly when
> using multiple planes, and in that sense the initial zpos values
> shouldn't matter, but there's really no reason not to fix this and help
> the userspace apps which don't handle zpos perfectly. In particular,
> Weston seems to have issues dealing with the planes with the current
> default zpos values.
> 
> So let's change the zpos values for the DRM planes to 0, 1, 2, 3.
> 
> Another option would be to configure the planes marked as primary planes
> to zpos 0. On a two display system this would give us plane zpos values
> of 0, 0, 1, 2. The end result and behavior would be very similar in this
> option, and I'm not aware that this would actually help us in any way.
> So, to keep the code simple, I opted for the 0, 1, 2, 3 values.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
> Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem")

Reviewed-by: Aradhya Bhatia <a-bhatia1@xxxxxx>

> ---
>  drivers/gpu/drm/tidss/tidss_plane.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/tidss/tidss_plane.c b/drivers/gpu/drm/tidss/tidss_plane.c
> index e1c0ef0c3894..68fed531f6a7 100644
> --- a/drivers/gpu/drm/tidss/tidss_plane.c
> +++ b/drivers/gpu/drm/tidss/tidss_plane.c
> @@ -213,7 +213,7 @@ struct tidss_plane *tidss_plane_create(struct tidss_device *tidss,
>  
>  	drm_plane_helper_add(&tplane->plane, &tidss_plane_helper_funcs);
>  
> -	drm_plane_create_zpos_property(&tplane->plane, hw_plane_id, 0,
> +	drm_plane_create_zpos_property(&tplane->plane, tidss->num_planes, 0,
>  				       num_planes - 1);
>  
>  	ret = drm_plane_create_color_properties(&tplane->plane,
>