[PATCH] PCI: dwc: Use the correct sleep function in wait_for_link

[Konrad Dybcio]

According to [1], msleep should be used for large sleeps, such as the
100-ish ms one in this function. Comply with the guide and use it.

[1] https://www.kernel.org/doc/Documentation/timers/timers-howto.txt

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
Tested on Qualcomm SC8280XP CRD
---
 drivers/pci/controller/dwc/pcie-designware.c | 2 +-
 drivers/pci/controller/dwc/pcie-designware.h | 3 +--
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 250cf7f40b85..abce6afceb91 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -655,7 +655,7 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci)
 		if (dw_pcie_link_up(pci))
 			break;
 
-		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+		msleep(LINK_WAIT_MSLEEP_MAX);
 	}
 
 	if (retries >= LINK_WAIT_MAX_RETRIES) {
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 26dae4837462..3f145d6a8a31 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -63,8 +63,7 @@
 
 /* Parameters for the waiting for link up routine */
 #define LINK_WAIT_MAX_RETRIES		10
-#define LINK_WAIT_USLEEP_MIN		90000
-#define LINK_WAIT_USLEEP_MAX		100000
+#define LINK_WAIT_MSLEEP_MAX		100
 
 /* Parameters for the waiting for iATU enabled routine */
 #define LINK_WAIT_MAX_IATU_RETRIES	5

---
base-commit: 26d7d52b6253574d5b6fec16a93e1110d1489cef
change-id: 20240215-topic-pci_sleep-368108a1fb6f

Best regards,
-- 
Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>