Re: [linux][PATCH v6 2/3] dt-bindings: atmel,hlcdc: convert pwm bindings to json-schema

From: Uwe Kleine-König
Date: Thu Feb 15 2024 - 04:55:03 EST


Hello,

On Fri, Feb 02, 2024 at 05:47:32AM +0530, Dharma Balasubiramani wrote:
> Convert device tree bindings for Atmel's HLCDC PWM controller to YAML
> format.
>
> Signed-off-by: Dharma Balasubiramani <dharma.b@xxxxxxxxxxxxx>
> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
> Changelog
> v5 -> v6
> - Drop the example as we have one complete example in mfd binding.
> v4 -> v5
> v3 -> v4
> - No changes
> Note: The clean up patch will be sent later as Sam suggested.
> v2 -> v3
> - Remove '|' in description, as there is no formatting to preserve.
> - Delete the description for pwm-cells.
> - Drop the label for pwm node as it not used.
> v1 -> v2
> - Remove the explicit copyrights.
> - Modify title (not include words like binding/driver).
> - Modify description actually describing the hardware and not the driver.
> - Remove pinctrl properties which aren't required.
> - Drop parent node and it's other sub-device node which are not related here.
> ---
> .../bindings/pwm/atmel,hlcdc-pwm.yaml | 35 +++++++++++++++++++
> .../bindings/pwm/atmel-hlcdc-pwm.txt | 29 ---------------
> 2 files changed, 35 insertions(+), 29 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml
> delete mode 100644 Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
>
> diff --git a/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml
> new file mode 100644
> index 000000000000..0e92868a2b68
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/atmel,hlcdc-pwm.yaml
> @@ -0,0 +1,35 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/atmel,hlcdc-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel's HLCDC's PWM controller
> +
> +maintainers:
> + - Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
> + - Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
> + - Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
> +
> +description:
> + The LCDC integrates a Pulse Width Modulation (PWM) Controller. This block
> + generates the LCD contrast control signal (LCD_PWM) that controls the
> + display's contrast by software. LCDC_PWM is an 8-bit PWM signal that can be
> + converted to an analog voltage with a simple passive filter. LCD display
> + panels have different backlight specifications in terms of minimum/maximum
> + values for PWM frequency. If the LCDC PWM frequency range does not match the
> + LCD display panel, it is possible to use the standalone PWM Controller to
> + drive the backlight.
> +
> +properties:
> + compatible:
> + const: atmel,hlcdc-pwm
> +
> + "#pwm-cells":
> + const: 3
> +
> +required:
> + - compatible
> + - "#pwm-cells"
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
> deleted file mode 100644
> index afa501bf7f94..000000000000
> --- a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
> +++ /dev/null
> @@ -1,29 +0,0 @@
> -Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver
> -
> -The Atmel HLCDC PWM is subdevice of the HLCDC MFD device.
> -See ../mfd/atmel-hlcdc.txt for more details.
> -
> -Required properties:
> - - compatible: value should be one of the following:
> - "atmel,hlcdc-pwm"
> - - pinctr-names: the pin control state names. Should contain "default".
> - - pinctrl-0: should contain the pinctrl states described by pinctrl
> - default.
> - - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells
> - bindings defined in pwm.yaml in this directory.
> -
> -Example:
> -
> - hlcdc: hlcdc@f0030000 {
> - compatible = "atmel,sama5d3-hlcdc";
> - reg = <0xf0030000 0x2000>;
> - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
> - clock-names = "periph_clk","sys_clk", "slow_clk";
> -
> - hlcdc_pwm: hlcdc-pwm {
> - compatible = "atmel,hlcdc-pwm";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lcd_pwm>;
> - #pwm-cells = <3>;
> - };
> - };

I guess dropping the example is fine because it's included now in the
mfd binding.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux.git pwm/for-next

Best regards
Uwe

--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |

Attachment: signature.asc
Description: PGP signature