Re: [PATCH] mmc: sd: Add a variable to check a faulty device

[Ulf Hansson]

On Tue, 13 Feb 2024 at 06:13, Seunghui Lee <sh043.lee@xxxxxxxxxxx> wrote:
>
> In mobile devices, suspend/resume situations are frequent.
> In the case of a defective SD card in which initialization fails,
> unnecessary initialization time is consumed for each resume.
> A field is needed to check that SD card initialization has failed
> on the host. It could be used to remove unnecessary initialization.

It's not clear to me, under what circumstance you want to optimize for.

Is the SD card ever getting properly initialized during boot?

Kind regards
Uffe

>
> Signed-off-by: Seunghui Lee <sh043.lee@xxxxxxxxxxx>
> ---
>  drivers/mmc/core/sd.c        | 12 +++++++++++-
>  drivers/mmc/core/slot-gpio.c |  1 +
>  include/linux/mmc/host.h     |  1 +
>  3 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
> index c3e554344c99..f0eb3864dc24 100644
> --- a/drivers/mmc/core/sd.c
> +++ b/drivers/mmc/core/sd.c
> @@ -1410,6 +1410,7 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
>         bool v18_fixup_failed = false;
>
>         WARN_ON(!host->claimed);
> +       host->init_failed = false;
>  retry:
>         err = mmc_sd_get_cid(host, ocr, cid, &rocr);
>         if (err)
> @@ -1752,6 +1753,8 @@ static int _mmc_sd_resume(struct mmc_host *host)
>
>         mmc_power_up(host, host->card->ocr);
>         err = mmc_sd_init_card(host, host->card->ocr, host->card);
> +       if (err)
> +               host->init_failed = true;
>         mmc_card_clr_suspended(host->card);
>
>  out:
> @@ -1803,8 +1806,12 @@ static int mmc_sd_runtime_resume(struct mmc_host *host)
>
>  static int mmc_sd_hw_reset(struct mmc_host *host)
>  {
> +       int err;
>         mmc_power_cycle(host, host->card->ocr);
> -       return mmc_sd_init_card(host, host->card->ocr, host->card);
> +       err = mmc_sd_init_card(host, host->card->ocr, host->card);
> +       if (err)
> +               host->init_failed = true;
> +       return err;
>  }
>
>  static const struct mmc_bus_ops mmc_sd_ops = {
> @@ -1891,5 +1898,8 @@ int mmc_attach_sd(struct mmc_host *host)
>         pr_err("%s: error %d whilst initialising SD card\n",
>                 mmc_hostname(host), err);
>
> +       if (err)
> +               host->init_failed = true;
> +
>         return err;
>  }
> diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
> index 2a2d949a9344..93d081c7dd53 100644
> --- a/drivers/mmc/core/slot-gpio.c
> +++ b/drivers/mmc/core/slot-gpio.c
> @@ -33,6 +33,7 @@ static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
>         struct mmc_gpio *ctx = host->slot.handler_priv;
>
>         host->trigger_card_event = true;
> +       host->init_failed = false;
>         mmc_detect_change(host, msecs_to_jiffies(ctx->cd_debounce_delay_ms));
>
>         return IRQ_HANDLED;
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 2f445c651742..1d75cfdbf981 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -467,6 +467,7 @@ struct mmc_host {
>         struct timer_list       retune_timer;   /* for periodic re-tuning */
>
>         bool                    trigger_card_event; /* card_event necessary */
> +       bool                    init_failed;    /* check if failed to initialize */
>
>         struct mmc_card         *card;          /* device attached to this host */
>
> --
> 2.29.0
>