Re: [PATCH] dt-bindings: hwmon: tda38640: Add interrupt & regulator properties

[Naresh Solanki]

Hi,


On Fri, 26 Jan 2024 at 21:54, Conor Dooley <conor@xxxxxxxxxx> wrote:
>
> On Fri, Jan 26, 2024 at 04:59:44PM +0530, Naresh Solanki wrote:
> > Add properties for interrupt & regulator.
> > Also update example.
>
> Feeling like a broken record, given I am leaving the same comments on
> multiple patches. The commit message needs to explain why you're doing
> something. I can read the diff and see what you did!
>
> >
> > TEST=Run below command & make sure there is no error.
> > make DT_CHECKER_FLAGS=-m dt_binding_check
>
> Same comment here as elsewhere.
Ack
>
> >
> > Signed-off-by: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
> > ---
> >  .../hwmon/pmbus/infineon,tda38640.yaml        | 20 +++++++++++++++++++
> >  1 file changed, 20 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml
> > index ded1c115764b..2df625a8b514 100644
> > --- a/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml
> > +++ b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml
> > @@ -30,6 +30,15 @@ properties:
> >        unconnected(has internal pull-down).
> >      type: boolean
> >
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  regulators:
> > +    $ref: /schemas/regulator/regulator.yaml#
> > +    type: object
> > +    description: |
>
> The | here is not needed, there's no formatting to preserve.
Ack
>
> From a quick check, most bindings with regulator subnodes restrict the
> subnode names with patternproperties. Is there a reason you have not?
I have corrected it now & will push in next revision.
regulators is expected to have subnode vout0. like below:
  regulators:
    type: object
    description:
      list of regulators provided by this controller.

    properties:
      vout0:
        $ref: /schemas/regulator/regulator.yaml#
        type: object

        unevaluatedProperties: false

    additionalProperties: false


>
> > +      list of regulators provided by this controller.
> > +
> >  required:
> >    - compatible
> >    - reg
> > @@ -38,6 +47,7 @@ additionalProperties: false
> >
> >  examples:
> >    - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> >      i2c {
> >          #address-cells = <1>;
> >          #size-cells = <0>;
> > @@ -45,5 +55,15 @@ examples:
> >          tda38640@40 {
> >              compatible = "infineon,tda38640";
> >              reg = <0x40>;
> > +
> > +            //interrupt-parent = <&smb_pex_cpu0_event>;
>
> Why is this commented out? Please either restore it or remove it (with
> justification).
Ack. will restore it.
>
> Thanks
>
> Conor.
>
> > +            interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
>
> Blank line here please.
Ack

Regards,
Naresh
>
> > +            regulators {
> > +                pvnn_main_cpu0: vout0 {
> > +                    regulator-compatible = "vout0";
> > +                    regulator-name = "pvnn_main_cpu0";
> > +                    regulator-enable-ramp-delay = <200>;
> > +                };
> > +            };
> >          };
> >      };
> >
> > base-commit: ecb1b8288dc7ccbdcb3b9df005fa1c0e0c0388a7
> > --
> > 2.42.0
> >