Re: [PATCH v3 0/2] arm64: dts: allwinner: h618: Add Sipeed Longan SoM 3H and Pi 3H board

From: Jernej Škrabec
Date: Mon Feb 12 2024 - 16:12:25 EST


Dne nedelja, 11. februar 2024 ob 09:17:37 CET je Jisheng Zhang napisal(a):
> Add Sipeed Longan SoM 3H and Longan Pi 3H board support.
>
> The Sipeed Longan SoM 3H is a system on module based on the Allwinner
> H618 SoC. The SoM features:
>
> - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
> - 2/4 GiB LPDDR4 DRAM SoMs
> - AXP313a PMIC
> - eMMC
>
> The Sipeed Longan PI 3H is a development board based on the above SoM.
> The board features:
> - Longan SoM 3H
> - Raspberry-Pi-1 compatible GPIO header
> - 2 USB 2.0 host port
> - 1 USB 2.0 type C port (power supply + OTG)
> - MicroSD slot
> - 1Gbps Ethernet port (via RTL8211 PHY)
> - HDMI port
> - WiFi/BT chip

Merged, thanks!

Best regards,
Jernej

>
> Since v2:
> - collect Reviewed-by tag
> - add vin-supply property to reg_vcc3v3
> - fix reg_vcc3v3 voltage value
> - remove "interrupt-parent" and "interrupts" properties from axp313
> node
>
> Since v1:
> - Use const rather than enum for "sipeed,longan-pi-3h" dt-binding
> - remove dts-v1, model and compatible from SoM dtsi
> - add interrupt related properties to axp313 dt node
> - use "vcc-1v8-pll" and "vcc-3v3-io" as regulator name
> - add dt node for board's discrete 5V->3.3V regulator and use it for
> eth\tfcard 3.3v supply
> - add usb2_vbus-supply property
>
>
> Jisheng Zhang (2):
> dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H
> arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board
> support
>
> .../devicetree/bindings/arm/sunxi.yaml | 6 +
> arch/arm64/boot/dts/allwinner/Makefile | 1 +
> .../sun50i-h618-longan-module-3h.dtsi | 75 +++++++++
> .../dts/allwinner/sun50i-h618-longanpi-3h.dts | 144 ++++++++++++++++++
> 4 files changed, 226 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts
>
>