[PATCH v2] arm64: dts: qcom: x1e80100-crd: add sound card

[Krzysztof Kozlowski]

Add sound card to X1E80100-CRD board and update DMIC supply.  Works so
far:
 - Audio playback via speakers or audio jack headset,
 - DMIC0-3 recording.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Change in v2:
1. Rebase omn dmic02->dmic23 renaming.
2. Add missing dmic pinctrl in lpass_vamacro node.
3. Add Rb tag.

Depends on dmic02->dmic23 renaming:
https://lore.kernel.org/linux-devicetree/20240212172335.124845-5-krzysztof.kozlowski@xxxxxxxxxx/T/#u

For full bindings dtbs_check compliance (not a dependency!) also needed:
https://lore.kernel.org/linux-devicetree/20240212183800.243017-1-krzysztof.kozlowski@xxxxxxxxxx/
---
 arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 98 ++++++++++++++++++++++-
 1 file changed, 97 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 12abc9287a75..6a0a54532e5f 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -18,7 +18,7 @@ aliases {
 		serial0 = &uart21;
 	};
 
-	audio-codec {
+	wcd938x: audio-codec {
 		compatible = "qcom,wcd9385-codec";
 
 		pinctrl-names = "default";
@@ -48,6 +48,94 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-CRD";
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TwitterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
+				"TwitterRight IN", "WSA2 WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS3",
+				"VA DMIC1", "VA MIC BIAS3",
+				"VA DMIC2", "VA MIC BIAS1",
+				"VA DMIC3", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_woofer>, <&left_tweeter>,
+					    <&swr0 0>, <&lpass_wsamacro 0>,
+					    <&right_woofer>, <&right_tweeter>,
+					    <&swr3 0>, <&lpass_wsa2macro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 
@@ -494,6 +582,14 @@ spkr_23_sd_n_active: spkr-23-sd-n-active-state {
 	};
 };
 
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
 &mdss {
 	status = "okay";
 };
-- 
2.34.1