[PATCH v3 0/2] arm64: dts: allwinner: h618: Add Sipeed Longan SoM 3H and Pi 3H board

[Jisheng Zhang]

Add Sipeed Longan SoM 3H and Longan Pi 3H board support.

The Sipeed Longan SoM 3H is a system on module based on the Allwinner
H618 SoC. The SoM features:

- Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
- 2/4 GiB LPDDR4 DRAM SoMs
- AXP313a PMIC
- eMMC

The Sipeed Longan PI 3H is a development board based on the above SoM.
The board features:
- Longan SoM 3H
- Raspberry-Pi-1 compatible GPIO header
- 2 USB 2.0 host port
- 1 USB 2.0 type C port (power supply + OTG)
- MicroSD slot
- 1Gbps Ethernet port (via RTL8211 PHY)
- HDMI port
- WiFi/BT chip

Since v2:
  - collect Reviewed-by tag
  - add vin-supply property to reg_vcc3v3
  - fix reg_vcc3v3 voltage value
  - remove "interrupt-parent" and "interrupts" properties from axp313
    node

Since v1:
  - Use const rather than enum for "sipeed,longan-pi-3h" dt-binding
  - remove dts-v1, model and compatible from SoM dtsi
  - add interrupt related properties to axp313 dt node
  - use "vcc-1v8-pll" and "vcc-3v3-io" as regulator name
  - add dt node for board's discrete 5V->3.3V regulator and use it for
    eth\tfcard 3.3v supply
  - add usb2_vbus-supply property


Jisheng Zhang (2):
  dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H
  arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board
    support

 .../devicetree/bindings/arm/sunxi.yaml        |   6 +
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../sun50i-h618-longan-module-3h.dtsi         |  75 +++++++++
 .../dts/allwinner/sun50i-h618-longanpi-3h.dts | 144 ++++++++++++++++++
 4 files changed, 226 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-longan-module-3h.dtsi
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-longanpi-3h.dts

-- 
2.43.0