Re: [PATCH net-next v2 4/5] net: ravb: Do not apply RX checksum settings to hardware if the interface is down
From: Sergey Shtylyov
Date: Fri Feb 09 2024 - 15:27:36 EST
On 2/9/24 8:04 PM, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>
> Do not apply the RX checksum settings to hardware if the interface is down.
> In case runtime PM is enabled, and while the interface is down, the IP will
> be in reset mode (as for some platforms disabling the clocks will switch
> the IP to reset mode, which will lead to losing register contents) and
> applying settings in reset mode is not an option. Instead, cache the RX
> checksum settings and apply them in ravb_open() through ravb_emac_init().
> This has been solved by introducing pm_runtime_active() check. The device
> runtime PM usage counter has been incremented to avoid disabling the device
> clocks while the check is in progress (if any).
>
> Commit prepares for the addition of runtime PM.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
Reviewed-by: Sergey Shtylyov <s.shtylyov@xxxxxx>
[...]
MBR, Sergey