Re: [PATCH v2 4/9] arm64: dts: ti: k3-am69-sk: Enable camera peripherals

[Jai Luthra]

On Feb 08, 2024 at 14:12:49 +0530, Vaishnav Achath wrote:
> CSI cameras are controlled using I2C. On AM69 Starter Kit, this is routed
> to I2C-1, so enable the instance, TCA9543 I2C switch and the TCA6408
> GPIO expander on the bus. AM69 SK has the CSI2RX routed to a MIPI CSI
> connector and to 22-pin RPi camera connector through an analog mux with
> GPIO control, model that so that an overlay can control the mux state
> according to connected cameras.
> 
> AM69 SK schematics: https://www.ti.com/lit/zip/sprr466
> 
> Signed-off-by: Vaishnav Achath <vaishnav.a@xxxxxx>

Reviewed-by: Jai Luthra <j-luthra@xxxxxx>

> ---
> 
> V1->V2: Update commit message with schematics.
> 
>  arch/arm64/boot/dts/ti/k3-am69-sk.dts | 51 +++++++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
> 
> [...] 

-- 
Thanks,
Jai

GPG Fingerprint: 4DE0 D818 E5D5 75E8 D45A AFC5 43DE 91F9 249A 7145

Attachment: signature.asc
Description: PGP signature