Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes

[Dmitry Baryshkov]

On Thu, 8 Feb 2024 at 08:14, Krishna Chaitanya Chundru
<quic_krichai@xxxxxxxxxxx> wrote:
>
>
>
> On 2/7/2024 5:17 PM, Dmitry Baryshkov wrote:
> > On Wed, 7 Feb 2024 at 12:42, Krishna chaitanya chundru
> > <quic_krichai@xxxxxxxxxxx> wrote:
> >>
> >> Enable PCIe1 controller and its corresponding PHY nodes on
> >> qcs6490-rb3g2 platform.
> >>
> >> PCIe switch is connected to PCIe1, PCIe switch has multiple endpoints
> >> connected. For each endpoint a unique BDF will be assigned and should
> >> assign unique smmu id. So for each BDF add smmu id.
> >>
> >> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> >> ---
> >>   arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 42 ++++++++++++++++++++++++++++
> >>   1 file changed, 42 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> >> index 8bb7d13d85f6..0082a3399453 100644
> >> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> >> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> >> @@ -413,6 +413,32 @@ vreg_bob_3p296: bob {
> >>          };
> >>   };
> >>
> >> +&pcie1 {
> >> +       perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
> >> +
> >> +       pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
> >> +       pinctrl-names = "default";
> >> +
> >> +       iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
> >> +                   <0x100 &apps_smmu 0x1c81 0x1>,
> >> +                   <0x208 &apps_smmu 0x1c84 0x1>,
> >> +                   <0x210 &apps_smmu 0x1c85 0x1>,
> >> +                   <0x218 &apps_smmu 0x1c86 0x1>,
> >> +                   <0x300 &apps_smmu 0x1c87 0x1>,
> >> +                   <0x400 &apps_smmu 0x1c88 0x1>,
> >> +                   <0x500 &apps_smmu 0x1c89 0x1>,
> >> +                   <0x501 &apps_smmu 0x1c90 0x1>;
> >
> > Is the iommu-map really board specific?
> >
> The iommu-map for PCIe varies if PCIe switch is connected.
> For this platform a PCIe switch is connected and for that reason
> we need to define additional smmu ID's for each BDF.
>
> For that reason we defined here as these ID's are applicable only
> for this board.

So, these IDs are the same for all boards, just being unused on
devices which have no bridges / switches connected to this PCIe host.
If this is correct, please move them to sc7280.dtsi.

>
> - Krishna Chaitanya.
> >> +
> >> +       status = "okay";
> >> +};
> >> +
> >> +&pcie1_phy {
> >> +       vdda-phy-supply = <&vreg_l10c_0p88>;
> >> +       vdda-pll-supply = <&vreg_l6b_1p2>;
> >> +
> >> +       status = "okay";
> >> +};
> >> +
> >>   &qupv3_id_0 {
> >>          status = "okay";
> >>   };
> >> @@ -420,6 +446,22 @@ &qupv3_id_0 {
> >>   &tlmm {
> >>          gpio-reserved-ranges = <32 2>, /* ADSP */
> >>                                 <48 4>; /* NFC */
> >> +
> >> +       pcie1_reset_n: pcie1-reset-n-state {
> >> +               pins = "gpio2";
> >> +               function = "gpio";
> >> +               drive-strength = <16>;
> >> +               output-low;
> >> +               bias-disable;
> >> +       };
> >> +
> >> +       pcie1_wake_n: pcie1-wake-n-state {
> >> +               pins = "gpio3";
> >> +               function = "gpio";
> >> +               drive-strength = <2>;
> >> +               bias-pull-up;
> >> +       };
> >> +
> >>   };
> >>
> >>   &uart5 {
> >>
> >> ---
> >> base-commit: 70d201a40823acba23899342d62bc2644051ad2e
> >> change-id: 20240207-enable_pcie-95b1d6612b27
> >>
> >> Best regards,
> >> --
> >> Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> >>
> >>
> >
> >



-- 
With best wishes
Dmitry