[PATCH 1/3] fpga: xilinx-spi: extract a common driver core

From: Charles Perry
Date: Wed Jan 31 2024 - 18:54:01 EST


Factor out the gpio handshaking (using PROGRAM_B, INIT_B and DONE)
protocol in xilinx-core so that it can be reused for another driver.
This commit does not change anything functionally to xilinx-spi.

xilinx-core expects drivers to provide two operations:

* ->write(const char* buf, size_t count): write to the device
* ->write_one_dummy_byte(): write 0xFF to the device

Signed-off-by: Charles Perry <charles.perry@xxxxxxxxxxxxxxxxxxxx>
---
drivers/fpga/Kconfig | 4 +
drivers/fpga/Makefile | 1 +
drivers/fpga/xilinx-core.c | 210 +++++++++++++++++++++++++++++++++++++
drivers/fpga/xilinx-core.h | 27 +++++
drivers/fpga/xilinx-spi.c | 204 +++--------------------------------
5 files changed, 257 insertions(+), 189 deletions(-)
create mode 100644 drivers/fpga/xilinx-core.c
create mode 100644 drivers/fpga/xilinx-core.h

diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 2f689ac4ba3a3..d27a1ebf40838 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -64,9 +64,13 @@ config FPGA_MGR_STRATIX10_SOC
help
FPGA manager driver support for the Intel Stratix10 SoC.

+config FPGA_MGR_XILINX_CORE
+ tristate
+
config FPGA_MGR_XILINX_SPI
tristate "Xilinx Configuration over Slave Serial (SPI)"
depends on SPI
+ select FPGA_MGR_XILINX_CORE
help
FPGA manager driver support for Xilinx FPGA configuration
over slave serial interface.
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 352a2612623e0..7ec795b6a5a70 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_FPGA_MGR_SOCFPGA) += socfpga.o
obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) += socfpga-a10.o
obj-$(CONFIG_FPGA_MGR_STRATIX10_SOC) += stratix10-soc.o
obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o
+obj-$(CONFIG_FPGA_MGR_XILINX_CORE) += xilinx-core.o
obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o
obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o
diff --git a/drivers/fpga/xilinx-core.c b/drivers/fpga/xilinx-core.c
new file mode 100644
index 0000000000000..aff40e9394085
--- /dev/null
+++ b/drivers/fpga/xilinx-core.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Common parts of the Xilinx Spartan6 and 7 Series FPGA manager drivers.
+ *
+ * Copyright (C) 2017 DENX Software Engineering
+ *
+ * Anatolij Gustschin <agust@xxxxxxx>
+ */
+
+#include "xilinx-core.h"
+
+#include <linux/delay.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+
+static int get_done_gpio(struct fpga_manager *mgr)
+{
+ struct xilinx_fpga_core *core = mgr->priv;
+ int ret;
+
+ ret = gpiod_get_value(core->done);
+
+ if (ret < 0)
+ dev_err(&mgr->dev, "Error reading DONE (%d)\n", ret);
+
+ return ret;
+}
+
+static enum fpga_mgr_states xilinx_core_state(struct fpga_manager *mgr)
+{
+ if (!get_done_gpio(mgr))
+ return FPGA_MGR_STATE_RESET;
+
+ return FPGA_MGR_STATE_UNKNOWN;
+}
+
+/**
+ * wait_for_init_b - wait for the INIT_B pin to have a given state, or wait
+ * a given delay if the pin is unavailable
+ *
+ * @mgr: The FPGA manager object
+ * @value: Value INIT_B to wait for (1 = asserted = low)
+ * @alt_udelay: Delay to wait if the INIT_B GPIO is not available
+ *
+ * Returns 0 when the INIT_B GPIO reached the given state or -ETIMEDOUT if
+ * too much time passed waiting for that. If no INIT_B GPIO is available
+ * then always return 0.
+ */
+static int wait_for_init_b(struct fpga_manager *mgr, int value,
+ unsigned long alt_udelay)
+{
+ struct xilinx_fpga_core *core = mgr->priv;
+ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+
+ if (core->init_b) {
+ while (time_before(jiffies, timeout)) {
+ int ret = gpiod_get_value(core->init_b);
+
+ if (ret == value)
+ return 0;
+
+ if (ret < 0) {
+ dev_err(&mgr->dev,
+ "Error reading INIT_B (%d)\n", ret);
+ return ret;
+ }
+
+ usleep_range(100, 400);
+ }
+
+ dev_err(&mgr->dev, "Timeout waiting for INIT_B to %s\n",
+ value ? "assert" : "deassert");
+ return -ETIMEDOUT;
+ }
+
+ udelay(alt_udelay);
+
+ return 0;
+}
+
+static int xilinx_core_write_init(struct fpga_manager *mgr,
+ struct fpga_image_info *info, const char *buf,
+ size_t count)
+{
+ struct xilinx_fpga_core *core = mgr->priv;
+ int err;
+
+ if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
+ dev_err(&mgr->dev, "Partial reconfiguration not supported\n");
+ return -EINVAL;
+ }
+
+ gpiod_set_value(core->prog_b, 1);
+
+ err = wait_for_init_b(mgr, 1, 1); /* min is 500 ns */
+ if (err) {
+ gpiod_set_value(core->prog_b, 0);
+ return err;
+ }
+
+ gpiod_set_value(core->prog_b, 0);
+
+ err = wait_for_init_b(mgr, 0, 0);
+ if (err)
+ return err;
+
+ if (get_done_gpio(mgr)) {
+ dev_err(&mgr->dev, "Unexpected DONE pin state...\n");
+ return -EIO;
+ }
+
+ /* program latency */
+ usleep_range(7500, 7600);
+ return 0;
+}
+
+static int xilinx_core_write(struct fpga_manager *mgr, const char *buf,
+ size_t count)
+{
+ struct xilinx_fpga_core *core = mgr->priv;
+
+ return core->write(core, buf, count);
+}
+
+static int xilinx_core_write_complete(struct fpga_manager *mgr,
+ struct fpga_image_info *info)
+{
+ struct xilinx_fpga_core *core = mgr->priv;
+ unsigned long timeout =
+ jiffies + usecs_to_jiffies(info->config_complete_timeout_us);
+ bool expired = false;
+ int done;
+ int ret;
+
+ /*
+ * This loop is carefully written such that if the driver is
+ * scheduled out for more than 'timeout', we still check for DONE
+ * before giving up and we apply 8 extra CCLK cycles in all cases.
+ */
+ while (!expired) {
+ expired = time_after(jiffies, timeout);
+
+ done = get_done_gpio(mgr);
+ if (done < 0)
+ return done;
+
+ ret = core->write_one_dummy_byte(core);
+ if (ret)
+ return ret;
+
+ if (done)
+ return 0;
+ }
+
+ if (core->init_b) {
+ ret = gpiod_get_value(core->init_b);
+
+ if (ret < 0) {
+ dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret);
+ return ret;
+ }
+
+ dev_err(&mgr->dev,
+ ret ? "CRC error or invalid device\n" :
+ "Missing sync word or incomplete bitstream\n");
+ } else {
+ dev_err(&mgr->dev, "Timeout after config data transfer\n");
+ }
+
+ return -ETIMEDOUT;
+}
+
+static const struct fpga_manager_ops xilinx_core_ops = {
+ .state = xilinx_core_state,
+ .write_init = xilinx_core_write_init,
+ .write = xilinx_core_write,
+ .write_complete = xilinx_core_write_complete,
+};
+
+int xilinx_core_probe(struct xilinx_fpga_core *core, struct device *dev,
+ xilinx_write_func write,
+ xilinx_write_one_dummy_byte_func write_one_dummy_byte)
+{
+ struct fpga_manager *mgr;
+
+ core->dev = dev;
+ core->write = write;
+ core->write_one_dummy_byte = write_one_dummy_byte;
+
+ /* PROGRAM_B is active low */
+ core->prog_b = devm_gpiod_get(dev, "prog_b", GPIOD_OUT_LOW);
+ if (IS_ERR(core->prog_b))
+ return dev_err_probe(dev, PTR_ERR(core->prog_b),
+ "Failed to get PROGRAM_B gpio\n");
+
+ core->init_b = devm_gpiod_get_optional(dev, "init-b", GPIOD_IN);
+ if (IS_ERR(core->init_b))
+ return dev_err_probe(dev, PTR_ERR(core->init_b),
+ "Failed to get INIT_B gpio\n");
+
+ core->done = devm_gpiod_get(dev, "done", GPIOD_IN);
+ if (IS_ERR(core->done))
+ return dev_err_probe(dev, PTR_ERR(core->done),
+ "Failed to get DONE gpio\n");
+
+ mgr = devm_fpga_mgr_register(dev, "Xilinx Slave Serial FPGA Manager",
+ &xilinx_core_ops, core);
+ return PTR_ERR_OR_ZERO(mgr);
+}
diff --git a/drivers/fpga/xilinx-core.h b/drivers/fpga/xilinx-core.h
new file mode 100644
index 0000000000000..40e120945ba70
--- /dev/null
+++ b/drivers/fpga/xilinx-core.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __XILINX_CORE_H
+#define __XILINX_CORE_H
+
+#include <linux/device.h>
+
+struct xilinx_fpga_core;
+
+typedef int (*xilinx_write_func)(struct xilinx_fpga_core *core, const char *buf,
+ size_t count);
+typedef int (*xilinx_write_one_dummy_byte_func)(struct xilinx_fpga_core *core);
+
+struct xilinx_fpga_core {
+ struct device *dev;
+ xilinx_write_func write;
+ xilinx_write_one_dummy_byte_func write_one_dummy_byte;
+ struct gpio_desc *prog_b;
+ struct gpio_desc *init_b;
+ struct gpio_desc *done;
+};
+
+int xilinx_core_probe(struct xilinx_fpga_core *core, struct device *dev,
+ xilinx_write_func write,
+ xilinx_write_one_dummy_byte_func write_one_dummy_byte);
+
+#endif /* __XILINX_CORE_H */
diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx-spi.c
index e1a227e7ff2ae..ec128dee97312 100644
--- a/drivers/fpga/xilinx-spi.c
+++ b/drivers/fpga/xilinx-spi.c
@@ -10,127 +10,24 @@
* the slave serial configuration interface.
*/

-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/fpga/fpga-mgr.h>
-#include <linux/gpio/consumer.h>
+#include "xilinx-core.h"
+
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/of.h>
#include <linux/spi/spi.h>
-#include <linux/sizes.h>

struct xilinx_spi_conf {
+ struct xilinx_fpga_core core;
struct spi_device *spi;
- struct gpio_desc *prog_b;
- struct gpio_desc *init_b;
- struct gpio_desc *done;
};

-static int get_done_gpio(struct fpga_manager *mgr)
-{
- struct xilinx_spi_conf *conf = mgr->priv;
- int ret;
-
- ret = gpiod_get_value(conf->done);
-
- if (ret < 0)
- dev_err(&mgr->dev, "Error reading DONE (%d)\n", ret);
-
- return ret;
-}
-
-static enum fpga_mgr_states xilinx_spi_state(struct fpga_manager *mgr)
-{
- if (!get_done_gpio(mgr))
- return FPGA_MGR_STATE_RESET;
-
- return FPGA_MGR_STATE_UNKNOWN;
-}
-
-/**
- * wait_for_init_b - wait for the INIT_B pin to have a given state, or wait
- * a given delay if the pin is unavailable
- *
- * @mgr: The FPGA manager object
- * @value: Value INIT_B to wait for (1 = asserted = low)
- * @alt_udelay: Delay to wait if the INIT_B GPIO is not available
- *
- * Returns 0 when the INIT_B GPIO reached the given state or -ETIMEDOUT if
- * too much time passed waiting for that. If no INIT_B GPIO is available
- * then always return 0.
- */
-static int wait_for_init_b(struct fpga_manager *mgr, int value,
- unsigned long alt_udelay)
-{
- struct xilinx_spi_conf *conf = mgr->priv;
- unsigned long timeout = jiffies + msecs_to_jiffies(1000);
-
- if (conf->init_b) {
- while (time_before(jiffies, timeout)) {
- int ret = gpiod_get_value(conf->init_b);
-
- if (ret == value)
- return 0;
-
- if (ret < 0) {
- dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret);
- return ret;
- }
-
- usleep_range(100, 400);
- }
-
- dev_err(&mgr->dev, "Timeout waiting for INIT_B to %s\n",
- value ? "assert" : "deassert");
- return -ETIMEDOUT;
- }
-
- udelay(alt_udelay);
-
- return 0;
-}
-
-static int xilinx_spi_write_init(struct fpga_manager *mgr,
- struct fpga_image_info *info,
- const char *buf, size_t count)
-{
- struct xilinx_spi_conf *conf = mgr->priv;
- int err;
-
- if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
- dev_err(&mgr->dev, "Partial reconfiguration not supported\n");
- return -EINVAL;
- }
-
- gpiod_set_value(conf->prog_b, 1);
+#define to_xilinx_spi_conf(obj) container_of(obj, struct xilinx_spi_conf, core)

- err = wait_for_init_b(mgr, 1, 1); /* min is 500 ns */
- if (err) {
- gpiod_set_value(conf->prog_b, 0);
- return err;
- }
-
- gpiod_set_value(conf->prog_b, 0);
-
- err = wait_for_init_b(mgr, 0, 0);
- if (err)
- return err;
-
- if (get_done_gpio(mgr)) {
- dev_err(&mgr->dev, "Unexpected DONE pin state...\n");
- return -EIO;
- }
-
- /* program latency */
- usleep_range(7500, 7600);
- return 0;
-}
-
-static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf,
+static int xilinx_spi_write(struct xilinx_fpga_core *core, const char *buf,
size_t count)
{
- struct xilinx_spi_conf *conf = mgr->priv;
+ struct xilinx_spi_conf *conf = to_xilinx_spi_conf(core);
const char *fw_data = buf;
const char *fw_data_end = fw_data + count;

@@ -143,7 +40,7 @@ static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf,

ret = spi_write(conf->spi, fw_data, stride);
if (ret) {
- dev_err(&mgr->dev, "SPI error in firmware write: %d\n",
+ dev_err(core->dev, "SPI error in firmware write: %d\n",
ret);
return ret;
}
@@ -153,77 +50,22 @@ static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf,
return 0;
}

-static int xilinx_spi_apply_cclk_cycles(struct xilinx_spi_conf *conf)
+static int xilinx_spi_apply_cclk_cycles(struct xilinx_fpga_core *core)
{
- struct spi_device *spi = conf->spi;
+ struct xilinx_spi_conf *conf = to_xilinx_spi_conf(core);
const u8 din_data[1] = { 0xff };
int ret;

ret = spi_write(conf->spi, din_data, sizeof(din_data));
if (ret)
- dev_err(&spi->dev, "applying CCLK cycles failed: %d\n", ret);
+ dev_err(core->dev, "applying CCLK cycles failed: %d\n", ret);

return ret;
}

-static int xilinx_spi_write_complete(struct fpga_manager *mgr,
- struct fpga_image_info *info)
-{
- struct xilinx_spi_conf *conf = mgr->priv;
- unsigned long timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us);
- bool expired = false;
- int done;
- int ret;
-
- /*
- * This loop is carefully written such that if the driver is
- * scheduled out for more than 'timeout', we still check for DONE
- * before giving up and we apply 8 extra CCLK cycles in all cases.
- */
- while (!expired) {
- expired = time_after(jiffies, timeout);
-
- done = get_done_gpio(mgr);
- if (done < 0)
- return done;
-
- ret = xilinx_spi_apply_cclk_cycles(conf);
- if (ret)
- return ret;
-
- if (done)
- return 0;
- }
-
- if (conf->init_b) {
- ret = gpiod_get_value(conf->init_b);
-
- if (ret < 0) {
- dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret);
- return ret;
- }
-
- dev_err(&mgr->dev,
- ret ? "CRC error or invalid device\n"
- : "Missing sync word or incomplete bitstream\n");
- } else {
- dev_err(&mgr->dev, "Timeout after config data transfer\n");
- }
-
- return -ETIMEDOUT;
-}
-
-static const struct fpga_manager_ops xilinx_spi_ops = {
- .state = xilinx_spi_state,
- .write_init = xilinx_spi_write_init,
- .write = xilinx_spi_write,
- .write_complete = xilinx_spi_write_complete,
-};
-
static int xilinx_spi_probe(struct spi_device *spi)
{
struct xilinx_spi_conf *conf;
- struct fpga_manager *mgr;

conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL);
if (!conf)
@@ -231,31 +73,15 @@ static int xilinx_spi_probe(struct spi_device *spi)

conf->spi = spi;

- /* PROGRAM_B is active low */
- conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW);
- if (IS_ERR(conf->prog_b))
- return dev_err_probe(&spi->dev, PTR_ERR(conf->prog_b),
- "Failed to get PROGRAM_B gpio\n");
-
- conf->init_b = devm_gpiod_get_optional(&spi->dev, "init-b", GPIOD_IN);
- if (IS_ERR(conf->init_b))
- return dev_err_probe(&spi->dev, PTR_ERR(conf->init_b),
- "Failed to get INIT_B gpio\n");
-
- conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN);
- if (IS_ERR(conf->done))
- return dev_err_probe(&spi->dev, PTR_ERR(conf->done),
- "Failed to get DONE gpio\n");
-
- mgr = devm_fpga_mgr_register(&spi->dev,
- "Xilinx Slave Serial FPGA Manager",
- &xilinx_spi_ops, conf);
- return PTR_ERR_OR_ZERO(mgr);
+ return xilinx_core_probe(&conf->core, &spi->dev, xilinx_spi_write,
+ xilinx_spi_apply_cclk_cycles);
}

#ifdef CONFIG_OF
static const struct of_device_id xlnx_spi_of_match[] = {
- { .compatible = "xlnx,fpga-slave-serial", },
+ {
+ .compatible = "xlnx,fpga-slave-serial",
+ },
{}
};
MODULE_DEVICE_TABLE(of, xlnx_spi_of_match);
--
2.43.0