Re: [PATCH 1/2] dt-bindings: usb: dwc3: Add system bus request info

[Frank Li]

On Tue, Jan 30, 2024 at 08:40:29AM +0100, Krzysztof Kozlowski wrote:
> On 29/01/2024 18:41, Frank Li wrote:
> > On Mon, Jan 29, 2024 at 04:49:21PM +0000, Conor Dooley wrote:
> >> On Mon, Jan 29, 2024 at 10:19:24AM -0500, Frank Li wrote:
> >>> On Tue, Jan 23, 2024 at 05:23:53PM -0500, Frank Li wrote:
> >>>> On Tue, Jan 23, 2024 at 10:46:39PM +0100, Krzysztof Kozlowski wrote:
> >>>>> On 23/01/2024 20:22, Frank Li wrote:
> >>>>>> On Tue, Jan 23, 2024 at 06:42:27PM +0000, Conor Dooley wrote:
> >>>>>>> On Tue, Jan 23, 2024 at 01:02:21PM -0500, Frank Li wrote:
> >>>>>>>> On Tue, Jan 23, 2024 at 05:51:48PM +0000, Conor Dooley wrote:
> >>>>>>>>> On Tue, Jan 23, 2024 at 12:49:27PM -0500, Frank Li wrote:
> >>>>>>>>>> On Tue, Jan 23, 2024 at 05:27:13PM +0000, Conor Dooley wrote:
> >>>>>>>>>>> On Tue, Jan 23, 2024 at 12:02:05PM -0500, Frank Li wrote:
> >>>>>>>>>>>> Add device tree binding allow platform overwrite default value of *REQIN in
> >>>>>>>>>>>> GSBUSCFG0.
> >>>>>>>>>>>
> >>>>>>>>>>> Why might a platform actually want to do this? Why does this need to be
> >>>>>>>>>>> set at the board level and being aware of which SoC is in use is not
> >>>>>>>>>>> sufficient for the driver to set the correct values?
> >>>>>>>>>>
> >>>>>>>>>> In snps,dwc3.yaml, there are already similary proptery, such as
> >>>>>>>>>> snps,incr-burst-type-adjustment. Use this method can keep whole dwc3 usb
> >>>>>>>>>> driver keep consistent. And not all platform try enable hardware
> >>>>>>>>>> dma_cohenrence. It is configable for difference platform.
> >>>>>>>>>
> >>>>>>>>> When you say "platform", what do you mean? I understand that term to
> >>>>>>>>> mean a combination of board, soc and firmware.
> >>>>>>>>
> >>>>>>>> In my company's environment, "platform" is "board". I will use "board" in
> >>>>>>>> future. Is it big difference here?
> >>>>>>>
> >>>>>>> Nah, that's close enough that it makes no difference here.
> >>>>>>>
> >>>>>>> I'd still like an explanation for why a platform would need to actually
> >>>>>>> set these properties though, and why information about coherency cannot
> >>>>>>> be determined from whether or not the boss the usb controller is on is
> >>>>>>> communicated to be dma coherent via the existing devicetree properties
> >>>>>>> for that purpose.
> >>>>>>
> >>>>>> Actually, I am not very clear about reason. I guest maybe treat off power
> >>>>>> consumption and performance.
> >>>>>>
> >>>>>> What's your judgement about proptery, which should be in dts. Such as
> >>>>>> reg, clk, reset, dma and irq, which is tighted with SOC. It is the fixed
> >>>>>> value for every SOC. The board dts never change these.
> >>>>>
> >>>>> Then it can be deduced from the compatible and there is no need for new
> >>>>> properties.
> >>>>
> >>>> Okay, I think "*reqinfo" match this. When new Soc(using compatible dwc usb
> >>>> controller) appear regardless dma-cohorence or not, connect by AXI3 or
> >>>> AXI4, needn't add new propterties. 
> >>>
> >>> Anyone have objection? I will prepare v2 to fix rob's bot error.
> >>
> >> I'm not sure what you want me to object to/not object to.
> >> Your last message said "needn't add new propterties", seemingly in
> >> agreement with Krzysztoff saying that it can be deduced from the
> >> compatible. That seems like a good way forward for me.
> > 
> > Okay, let me clear it again. dwc usb is quite common IP. The below is
> > what reason why need "*reginfo* instead of using compatible string.
> > 
> > 1. *reginfo* property is decscript hardware behevior, which will be changed
> > at difference SOC.
> > 2. it may change at board level according to if enable dma coherence.
> 
> dma coherence is not a board property. Anyway, you said it will never
> change in the board.

Sorry, let's correct what my previous said. There are two kinds bus in
system, one is dma_coherence, the other is none dma_coherence. There are
some dwc usb core ip, which is the exact the same. Some connect to
dma_coherence bus, some connect to non-dma_coherence bus.

So dma_coherence will be varible for this case. we need set *reginfo* for
dwc usb core, which connnect to dma_coherence bus.  not set "reginfo* for
the dwc usb core, which connect to none dma_coherence bus.

If use difference compatible string, that's means using difference
compatible string to descript one same hardware. You reject this method at
my svc-i3c-master\svc-i3c-target patches.

Frank

> 
> > 3. dwc core part is quite common, all SOC using common "snps, dwc3" as
> > core-part, all soc specific "nxp, dwc3 *", "qcom, dwc3*" is used for glue
> > logic part.
> 
> And all should be having dedicated compatibles.
> 
> > 4. using *reginfo* can reduce add more strange compatible string such as
> > "nxp, dwc3-core" ...
> > 5. *reginfo* property likes "reg", "clk", and align what Kryzystoff said.
> > "reg", "clk" is fixed for specfic SOC. These can help reduce "compatible"
> > string number. "reginfo" do the same work as "reg", "clk" ..
> 
> So again, reginfo is fixed for specific SoC? So it can be deduced from
> compatible.
> 
> I don't know what to say more here... so let's be clear that you
> understood me:
> 
> NAK
> 
> Best regards,
> Krzysztof
>