Re: [PATCH RFC 6/6] mm: madvise: don't split mTHP for MADV_PAGEOUT

From: Chris Li
Date: Sun Jan 28 2024 - 21:15:26 EST


On Thu, Jan 18, 2024 at 3:12 AM Barry Song <21cnbao@xxxxxxxxx> wrote:
>
> From: Chuanhua Han <hanchuanhua@xxxxxxxx>
>
> MADV_PAGEOUT and MADV_FREE are common cases in Android. Ryan's patchset has
> supported swapping large folios out as a whole for vmscan case. This patch
> extends the feature to madvise.
>
> If madvised range covers the whole large folio, we don't split it. Otherwise,
> we still need to split it.
>
> This patch doesn't depend on ARM64's CONT-PTE, alternatively, it defines one
> helper named pte_range_cont_mapped() to check if all PTEs are contiguously
> mapped to a large folio.
>
> Signed-off-by: Chuanhua Han <hanchuanhua@xxxxxxxx>
> Co-developed-by: Barry Song <v-songbaohua@xxxxxxxx>
> Signed-off-by: Barry Song <v-songbaohua@xxxxxxxx>
> ---
> include/asm-generic/tlb.h | 10 +++++++
> include/linux/pgtable.h | 60 +++++++++++++++++++++++++++++++++++++++
> mm/madvise.c | 48 +++++++++++++++++++++++++++++++
> 3 files changed, 118 insertions(+)
>
> diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
> index 129a3a759976..f894e22da5d6 100644
> --- a/include/asm-generic/tlb.h
> +++ b/include/asm-generic/tlb.h
> @@ -608,6 +608,16 @@ static inline void tlb_flush_p4d_range(struct mmu_gather *tlb,
> __tlb_remove_tlb_entry(tlb, ptep, address); \
> } while (0)
>
> +#define tlb_remove_nr_tlb_entry(tlb, ptep, address, nr) \
> + do { \
> + int i; \
> + tlb_flush_pte_range(tlb, address, \
> + PAGE_SIZE * nr); \
> + for (i = 0; i < nr; i++) \
> + __tlb_remove_tlb_entry(tlb, ptep + i, \
> + address + i * PAGE_SIZE); \
> + } while (0)
> +
> #define tlb_remove_huge_tlb_entry(h, tlb, ptep, address) \
> do { \
> unsigned long _sz = huge_page_size(h); \
> diff --git a/include/linux/pgtable.h b/include/linux/pgtable.h
> index 37fe83b0c358..da0c1cf447e3 100644
> --- a/include/linux/pgtable.h
> +++ b/include/linux/pgtable.h
> @@ -320,6 +320,42 @@ static inline pgd_t pgdp_get(pgd_t *pgdp)
> }
> #endif
>
> +#ifndef pte_range_cont_mapped
> +static inline bool pte_range_cont_mapped(unsigned long start_pfn,
> + pte_t *start_pte,
> + unsigned long start_addr,
> + int nr)
> +{
> + int i;
> + pte_t pte_val;
> +
> + for (i = 0; i < nr; i++) {
> + pte_val = ptep_get(start_pte + i);
> +
> + if (pte_none(pte_val))
> + return false;

Hmm, the following check pte_pfn == start_pfn + i should have covered
the pte none case?

I think the pte_none means it can't have a valid pfn. So this check
can be skipped?

> +
> + if (pte_pfn(pte_val) != (start_pfn + i))
> + return false;
> + }
> +
> + return true;
> +}
> +#endif
> +
> +#ifndef pte_range_young
> +static inline bool pte_range_young(pte_t *start_pte, int nr)
> +{
> + int i;
> +
> + for (i = 0; i < nr; i++)
> + if (pte_young(ptep_get(start_pte + i)))
> + return true;
> +
> + return false;
> +}
> +#endif
> +
> #ifndef __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
> static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
> unsigned long address,
> @@ -580,6 +616,23 @@ static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
> }
> #endif
>
> +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_RANGE_FULL
> +static inline pte_t ptep_get_and_clear_range_full(struct mm_struct *mm,
> + unsigned long start_addr,
> + pte_t *start_pte,
> + int nr, int full)
> +{
> + int i;
> + pte_t pte;
> +
> + pte = ptep_get_and_clear_full(mm, start_addr, start_pte, full);
> +
> + for (i = 1; i < nr; i++)
> + ptep_get_and_clear_full(mm, start_addr + i * PAGE_SIZE,
> + start_pte + i, full);
> +
> + return pte;
> +}
>
> /*
> * If two threads concurrently fault at the same page, the thread that
> @@ -995,6 +1048,13 @@ static inline void arch_swap_restore(swp_entry_t entry, struct folio *folio)
> })
> #endif
>
> +#ifndef pte_nr_addr_end
> +#define pte_nr_addr_end(addr, size, end) \
> +({ unsigned long __boundary = ((addr) + size) & (~(size - 1)); \
> + (__boundary - 1 < (end) - 1)? __boundary: (end); \
> +})
> +#endif
> +
> /*
> * When walking page tables, we usually want to skip any p?d_none entries;
> * and any p?d_bad entries - reporting the error before resetting to none.
> diff --git a/mm/madvise.c b/mm/madvise.c
> index 912155a94ed5..262460ac4b2e 100644
> --- a/mm/madvise.c
> +++ b/mm/madvise.c
> @@ -452,6 +452,54 @@ static int madvise_cold_or_pageout_pte_range(pmd_t *pmd,
> if (folio_test_large(folio)) {
> int err;
>
> + if (!folio_test_pmd_mappable(folio)) {

This session of code indent into the right too much.
You can do:

if (folio_test_pmd_mappable(folio))
goto split;

to make the code flatter.

> + int nr_pages = folio_nr_pages(folio);
> + unsigned long folio_size = PAGE_SIZE * nr_pages;
> + unsigned long start_addr = ALIGN_DOWN(addr, nr_pages * PAGE_SIZE);;
> + unsigned long start_pfn = page_to_pfn(folio_page(folio, 0));
> + pte_t *start_pte = pte - (addr - start_addr) / PAGE_SIZE;
> + unsigned long next = pte_nr_addr_end(addr, folio_size, end);
> +
> + if (!pte_range_cont_mapped(start_pfn, start_pte, start_addr, nr_pages))
> + goto split;
> +
> + if (next - addr != folio_size) {

Nitpick: One line statement does not need {

> + goto split;
> + } else {

When the previous if statement already "goto split", there is no need
for the else. You can save one level of indentation.



> + /* Do not interfere with other mappings of this page */
> + if (folio_estimated_sharers(folio) != 1)
> + goto skip;
> +
> + VM_BUG_ON(addr != start_addr || pte != start_pte);
> +
> + if (pte_range_young(start_pte, nr_pages)) {
> + ptent = ptep_get_and_clear_range_full(mm, start_addr, start_pte,
> + nr_pages, tlb->fullmm);
> + ptent = pte_mkold(ptent);
> +
> + set_ptes(mm, start_addr, start_pte, ptent, nr_pages);
> + tlb_remove_nr_tlb_entry(tlb, start_pte, start_addr, nr_pages);
> + }
> +
> + folio_clear_referenced(folio);
> + folio_test_clear_young(folio);
> + if (pageout) {
> + if (folio_isolate_lru(folio)) {
> + if (folio_test_unevictable(folio))
> + folio_putback_lru(folio);
> + else
> + list_add(&folio->lru, &folio_list);
> + }
> + } else
> + folio_deactivate(folio);

I notice this section is very similar to the earlier statements inside
the same function.
"if (pmd_trans_huge(*pmd)) {"

Wondering if there is some way to unify the two a bit somehow.

Also notice if you test the else condition first,

If (!pageout) {
folio_deactivate(folio);
goto skip;
}

You can save one level of indentation.
Not your fault, I notice the section inside (pmd_trans_huge(*pmd))
does exactly the same thing.

Chris


> + }
> +skip:
> + pte += (next - PAGE_SIZE - (addr & PAGE_MASK))/PAGE_SIZE;
> + addr = next - PAGE_SIZE;
> + continue;
> +
> + }
> +split:
> if (folio_estimated_sharers(folio) != 1)
> break;
> if (pageout_anon_only_filter && !folio_test_anon(folio))
> --
> 2.34.1
>
>