[PATCH v3 6/6] dt-bindings: PCI: qcom,pcie-sc8280xp: move SC8280XP to dedicated schema
From: Krzysztof Kozlowski
Date: Fri Jan 26 2024 - 04:38:05 EST
Move SC8280XP compatible PCIe devices from qcom,pcie.yaml binding to a
dedicated file to make reviewing easier.
This creates equivalent schema file, except missing required compatible
which is actually redundant.
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../bindings/pci/qcom,pcie-sc8280xp.yaml | 180 +++++++++++++++++++++
.../devicetree/bindings/pci/qcom,pcie.yaml | 54 -------
2 files changed, 180 insertions(+), 54 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml
new file mode 100644
index 000000000000..25c9f13ae977
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@xxxxxxxxxx>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
+
+description:
+ Qualcomm SC8280XP SoC PCIe root complex controller is based on the Synopsys
+ DesignWare PCIe IP.
+
+properties:
+ compatible:
+ enum:
+ - qcom,pcie-sa8540p
+ - qcom,pcie-sc8280xp
+
+ reg:
+ minItems: 5
+ maxItems: 6
+
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 8
+ maxItems: 9
+
+ clock-names:
+ minItems: 8
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - const: noc_aggr_4 # NoC aggregate 4 clock
+ - const: noc_aggr_south_sf # NoC aggregate South SF clock
+ - const: cnoc_qx # Configuration NoC QX clock
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: pci
+
+ vddpe-3v3-supply:
+ description: A phandle to the PCIe endpoint power supply
+
+required:
+ - interconnects
+ - interconnect-names
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sc8280xp
+ then:
+ properties:
+ interrupts:
+ minItems: 4
+ maxItems: 4
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ else:
+ properties:
+ interrupts:
+ maxItems: 1
+ interrupt-names:
+ items:
+ - const: msi
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c20000 {
+ compatible = "qcom,pcie-sc8280xp";
+ reg = <0x0 0x01c20000 0x0 0x3000>,
+ <0x0 0x3c000000 0x0 0xf1d>,
+ <0x0 0x3c000f20 0x0 0xa8>,
+ <0x0 0x3c001000 0x0 0x1000>,
+ <0x0 0x3c100000 0x0 0x100000>,
+ <0x0 0x01c23000 0x0 0x1000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x3c200000 0x0 0x100000>,
+ <0x02000000 0x0 0x3c300000 0x0 0x3c300000 0x0 0x1d00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ num-lanes = <4>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ assigned-clocks = <&gcc GCC_PCIE_2A_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+ clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
+ <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_2A_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_2A_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_2A_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_4_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_SOUTH_SF_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ddrss_sf_tbu",
+ "noc_aggr_4",
+ "noc_aggr_south_sf";
+
+ dma-coherent;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0", "msi1", "msi2", "msi3";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+
+ interconnects = <&aggre2_noc MASTER_PCIE_2A 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_2A 0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ phys = <&pcie2a_phy>;
+ phy-names = "pciephy";
+
+ pinctrl-0 = <&pcie2a_default>;
+ pinctrl-names = "default";
+
+ power-domains = <&gcc PCIE_2A_GDSC>;
+
+ resets = <&gcc GCC_PCIE_2A_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+ vddpe-3v3-supply = <&vreg_nvme>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index 6e03a1bce5d4..c8f36978a94c 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -28,11 +28,9 @@ properties:
- qcom,pcie-ipq8074-gen3
- qcom,pcie-msm8996
- qcom,pcie-qcs404
- - qcom,pcie-sa8540p
- qcom,pcie-sa8775p
- qcom,pcie-sc7280
- qcom,pcie-sc8180x
- - qcom,pcie-sc8280xp
- qcom,pcie-sdm845
- qcom,pcie-sdx55
- items:
@@ -210,7 +208,6 @@ allOf:
- qcom,pcie-sa8775p
- qcom,pcie-sc7280
- qcom,pcie-sc8180x
- - qcom,pcie-sc8280xp
- qcom,pcie-sdx55
then:
properties:
@@ -538,36 +535,6 @@ allOf:
items:
- const: pci # PCIe core reset
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sa8540p
- - qcom,pcie-sc8280xp
- then:
- properties:
- clocks:
- minItems: 8
- maxItems: 9
- clock-names:
- minItems: 8
- items:
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- - const: ddrss_sf_tbu # PCIe SF TBU clock
- - const: noc_aggr_4 # NoC aggregate 4 clock
- - const: noc_aggr_south_sf # NoC aggregate South SF clock
- - const: cnoc_qx # Configuration NoC QX clock
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: pci # PCIe core reset
-
- if:
properties:
compatible:
@@ -623,9 +590,7 @@ allOf:
compatible:
contains:
enum:
- - qcom,pcie-sa8540p
- qcom,pcie-sa8775p
- - qcom,pcie-sc8280xp
then:
required:
- interconnects
@@ -692,24 +657,6 @@ allOf:
- const: msi6
- const: msi7
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sc8280xp
- then:
- properties:
- interrupts:
- minItems: 4
- maxItems: 4
- interrupt-names:
- items:
- - const: msi0
- - const: msi1
- - const: msi2
- - const: msi3
-
- if:
properties:
compatible:
@@ -724,7 +671,6 @@ allOf:
- qcom,pcie-ipq8074
- qcom,pcie-ipq8074-gen3
- qcom,pcie-qcs404
- - qcom,pcie-sa8540p
then:
properties:
interrupts:
--
2.34.1