[PATCH RFC 2/2] arm64: dts: qcom: msm8953: Add GPU

From: Luca Weiss
Date: Thu Jan 25 2024 - 16:56:54 EST


From: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>

Add the GPU node for the Adreno 506 found on this family of SoCs. The
clock speeds are a bit different per SoC variant, SDM450 maxes out at
600MHz while MSM8953 (= SDM625) goes up to 650MHz and SDM632 goes up to
725MHz.

To achieve this, create a new sdm450.dtsi to hold the 600MHz OPP and
use the new dtsi for sdm450-motorola-ali.

Signed-off-by: Vladimir Lypak <vladimir.lypak@xxxxxxxxx>
Co-developed-by: Luca Weiss <luca@xxxxxxxxx>
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8953.dtsi | 115 +++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts | 2 +-
arch/arm64/boot/dts/qcom/sdm450.dtsi | 14 +++
arch/arm64/boot/dts/qcom/sdm632.dtsi | 8 ++
4 files changed, 138 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 91d083871ab0..1fe0c0c4fd15 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -1046,6 +1046,94 @@ mdss_dsi1_phy: phy@1a96400 {
};
};

+ gpu: gpu@1c00000 {
+ compatible = "qcom,adreno-506.0", "qcom,adreno";
+ reg = <0x01c00000 0x40000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_OXILI_GFX3D_CLK>,
+ <&gcc GCC_OXILI_AHB_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_BIMC_GPU_CLK>,
+ <&gcc GCC_OXILI_TIMER_CLK>,
+ <&gcc GCC_OXILI_AON_CLK>;
+ clock-names = "core",
+ "iface",
+ "mem_iface",
+ "alt_mem_iface",
+ "rbbmtimer",
+ "alwayson";
+ power-domains = <&gcc OXILI_GX_GDSC>;
+
+ iommus = <&gpu_iommu 0>;
+ operating-points-v2 = <&gpu_opp_table>;
+
+ #cooling-cells = <2>;
+
+ status = "disabled";
+
+ zap-shader {
+ memory-region = <&zap_shader_region>;
+ };
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ opp-supported-hw = <0xff>;
+ required-opps = <&rpmpd_opp_min_svs>;
+ };
+
+ opp-133300000 {
+ opp-hz = /bits/ 64 <133300000>;
+ opp-supported-hw = <0xff>;
+ required-opps = <&rpmpd_opp_min_svs>;
+ };
+
+ opp-216000000 {
+ opp-hz = /bits/ 64 <216000000>;
+ opp-supported-hw = <0xff>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-320000000 {
+ opp-hz = /bits/ 64 <320000000>;
+ opp-supported-hw = <0xff>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-supported-hw = <0xff>;
+ required-opps = <&rpmpd_opp_svs_plus>;
+ };
+
+ opp-510000000 {
+ opp-hz = /bits/ 64 <510000000>;
+ opp-supported-hw = <0xff>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+
+ opp-560000000 {
+ opp-hz = /bits/ 64 <560000000>;
+ opp-supported-hw = <0xff>;
+ required-opps = <&rpmpd_opp_nom_plus>;
+ };
+
+ /*
+ * This opp is only available on msm8953 and
+ * sdm632, the max for sdm450 is 600MHz.
+ */
+ opp-650000000 {
+ opp-hz = /bits/ 64 <650000000>;
+ opp-supported-hw = <0xff>;
+ required-opps = <&rpmpd_opp_turbo>;
+ };
+ };
+ };
+
gpu_iommu: iommu@1c48000 {
compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v2";
ranges = <0 0x01c48000 0x8000>;
@@ -2045,6 +2133,33 @@ map0 {
};
};
};
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsens0 15>;
+
+ trips {
+ gpu_alert: trip-point0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu_crit: crit {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
};

timer {
diff --git a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
index 362be5719dd2..e27f3c5d5bba 100644
--- a/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
+++ b/arch/arm64/boot/dts/qcom/sdm450-motorola-ali.dts
@@ -4,7 +4,7 @@
*/
/dts-v1/;

-#include "msm8953.dtsi"
+#include "sdm450.dtsi"
#include "pm8953.dtsi"
#include "pmi8950.dtsi"

diff --git a/arch/arm64/boot/dts/qcom/sdm450.dtsi b/arch/arm64/boot/dts/qcom/sdm450.dtsi
new file mode 100644
index 000000000000..b222aeb459a3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm450.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2023, Luca Weiss <luca@xxxxxxxxx> */
+
+#include "msm8953.dtsi"
+
+&gpu_opp_table {
+ /delete-node/ opp-650000000;
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-supported-hw = <0xff>;
+ required-opps = <&rpmpd_opp_turbo>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm632.dtsi b/arch/arm64/boot/dts/qcom/sdm632.dtsi
index 645b9f6a801f..95b025ea260b 100644
--- a/arch/arm64/boot/dts/qcom/sdm632.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm632.dtsi
@@ -79,3 +79,11 @@ &CPU7 {
compatible = "qcom,kryo250";
capacity-dmips-mhz = <1980>;
};
+
+&gpu_opp_table {
+ opp-725000000 {
+ opp-hz = /bits/ 64 <725000000>;
+ opp-supported-hw = <0xff>;
+ required-opps = <&rpmpd_opp_turbo>;
+ };
+};

--
2.43.0