[PATCH v4 10/11] arm64: dts: qcom: x1e80100-qcp: Enable more support

From: Abel Vesa
Date: Tue Jan 23 2024 - 06:04:29 EST


Enable display, pcie and usb support.

Co-developed-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
Co-developed-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
Signed-off-by: Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 171 ++++++++++++++++++++++++++++++
1 file changed, 171 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index a37ad9475c90..8dbf6d0eaac3 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -5,6 +5,7 @@

/dts-v1/;

+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>

#include "x1e80100.dtsi"
@@ -31,6 +32,23 @@ vph_pwr: vph-pwr-regulator {
regulator-always-on;
regulator-boot-on;
};
+
+ vreg_edp_3p3: regulator-edp-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_EDP_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&edp_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
};

&apps_rsc {
@@ -383,17 +401,170 @@ vreg_l3j_0p8: ldo3 {
};
};

+&mdss {
+ status = "okay";
+};
+
+&mdss_dp3 {
+ compatible = "qcom,x1e80100-dp";
+ /delete-property/ #sound-dai-cells;
+
+ data-lanes = <0 1 2 3>;
+
+ status = "okay";
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+ power-supply = <&vreg_edp_3p3>;
+
+ port {
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss_dp3_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ reg = <1>;
+ mdss_dp3_out: endpoint {
+ remote-endpoint = <&edp_panel_in>;
+ };
+ };
+ };
+};
+
+&mdss_dp3_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&pcie4 {
+ status = "okay";
+};
+
+&pcie4_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&pcie6a {
+ status = "okay";
+};
+
+&pcie6a_phy {
+ vdda-phy-supply = <&vreg_l3j_0p8>;
+ vdda-pll-supply = <&vreg_l2j_1p2>;
+
+ status = "okay";
+};
+
+&qupv3_0 {
+ status = "okay";
+};
+
+&qupv3_1 {
+ status = "okay";
+};
+
&qupv3_2 {
status = "okay";
};

+&remoteproc_adsp {
+ firmware-name = "qcom/x1e80100/adsp.mbn",
+ "qcom/x1e80100/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/x1e80100/cdsp.mbn",
+ "qcom/x1e80100/cdsp_dtb.mbn";
+
+ status = "okay";
+};
+
&tlmm {
gpio-reserved-ranges = <33 3>, /* Unused */
<44 4>, /* SPI (TPM) */
<238 1>; /* UFS Reset */
+
+ edp_reg_en: edp-reg-en-state {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ };
};

&uart21 {
compatible = "qcom,geni-debug-uart";
status = "okay";
};
+
+&usb_1_ss0_hsphy {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+ status = "okay";
+};
+
+&usb_1_ss0 {
+ status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+ dr_mode = "host";
+ usb-role-switch;
+};
+
+&usb_1_ss1_hsphy {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+ status = "okay";
+};
+
+&usb_1_ss1 {
+ status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+ dr_mode = "host";
+ usb-role-switch;
+};
+
+&usb_1_ss2_hsphy {
+ vdd-supply = <&vreg_l2e_0p8>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+ status = "okay";
+};
+
+&usb_1_ss2 {
+ status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+ dr_mode = "host";
+ usb-role-switch;
+};

--
2.34.1