Re: Dell XPS 13 9360: DMAR errors `DRHD: handling fault status reg 2` and `[INTR-REMAP] Request device [f0:1f.0] fault index 0x0`

[Baolu Lu]

On 2024/1/19 20:59, Paul Menzel wrote:
> Dear Linux folks,
>
>
> On a Dell XPS 13 9360 Linux 6.6.8, 6.6.11 and 6.7 (and earlier versions) 
> log the lines below when resuming from ACPI S3 (deep):
>
>      [    0.000000] Linux version 6.7-amd64 
> (debian-kernel@xxxxxxxxxxxxxxxx) (x86_64-linux-gnu-gcc-13 (Debian 
> 13.2.0-9) 13.2.0, GNU ld (GNU Binutils for Debian) 2.41.50.20231227) #1 
> SMP PREEMPT_DYNAMIC Debian 6.7-1~exp1 (2024-01-08)
>      [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.7-amd64 
> root=UUID=32e29882-d94d-4a92-9ee4-4d03002bfa29 ro quiet pci=noaer 
> mem_sleep_default=deep log_buf_len=8M
>      […]
>      [    0.000000] DMI: Dell Inc. XPS 13 9360/0596KF, BIOS 2.21.0 
> 06/02/2022
>      […]
>      [   99.711230] PM: suspend entry (deep)
>      […]
>      [   99.722101] printk: Suspending console(s) (use 
> no_console_suspend to debug)
>      [  100.285178] ACPI: EC: interrupt blocked
>      [  100.319908] ACPI: PM: Preparing to enter system sleep state S3
>      [  100.331793] ACPI: EC: event blocked
>      [  100.331798] ACPI: EC: EC stopped
>      [  100.331800] ACPI: PM: Saving platform NVS memory
>      [  100.335224] Disabling non-boot CPUs ...
>      [  100.337412] smpboot: CPU 1 is now offline
>      [  100.341065] smpboot: CPU 2 is now offline
>      [  100.346441] smpboot: CPU 3 is now offline
>      [  100.353086] ACPI: PM: Low-level resume complete
>      [  100.353129] ACPI: EC: EC started
>      [  100.353129] ACPI: PM: Restoring platform NVS memory
>      [  100.355219] Enabling non-boot CPUs ...
>      [  100.355244] smpboot: Booting Node 0 Processor 1 APIC 0x2
>      [  100.355954] CPU1 is up
>      [  100.355972] smpboot: Booting Node 0 Processor 2 APIC 0x1
>      [  100.356698] CPU2 is up
>      [  100.356716] smpboot: Booting Node 0 Processor 3 APIC 0x3
>      [  100.357371] CPU3 is up
>      [  100.360217] ACPI: PM: Waking up from system sleep state S3
>      [  100.668380] ACPI: EC: interrupt unblocked
>      [  100.668598] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS 
> workaround enabled
>      [  100.668606] pcieport 0000:00:1c.4: Intel SPT PCH root port ACS 
> workaround enabled
>      [  100.668643] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS 
> workaround enabled
>      [  100.690996] DMAR: DRHD: handling fault status reg 2
>      [  100.691001] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault 
> index 0x0 [fault reason 0x25] Blocked a compatibility format interrupt 
> request
>
> But I am unable to find the device f0:1f.0:
>
>      $ lspci -nn
>      00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v6/7th 
> Gen Core Processor Host Bridge/DRAM Registers [8086:5904] (rev 02)
>      00:02.0 VGA compatible controller [0300]: Intel Corporation HD 
> Graphics 620 [8086:5916] (rev 02)
>      00:04.0 Signal processing controller [1180]: Intel Corporation Xeon 
> E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem 
> [8086:1903] (rev 02)
>      00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-LP 
> USB 3.0 xHCI Controller [8086:9d2f] (rev 21)
>      00:14.2 Signal processing controller [1180]: Intel Corporation 
> Sunrise Point-LP Thermal subsystem [8086:9d31] (rev 21)
>      00:15.0 Signal processing controller [1180]: Intel Corporation 
> Sunrise Point-LP Serial IO I2C Controller #0 [8086:9d60] (rev 21)
>      00:15.1 Signal processing controller [1180]: Intel Corporation 
> Sunrise Point-LP Serial IO I2C Controller #1 [8086:9d61] (rev 21)
>      00:16.0 Communication controller [0780]: Intel Corporation Sunrise 
> Point-LP CSME HECI #1 [8086:9d3a] (rev 21)
>      00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI 
> Express Root Port #1 [8086:9d10] (rev f1)
>      00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI 
> Express Root Port #5 [8086:9d14] (rev f1)
>      00:1d.0 PCI bridge [0604]: Intel Corporation Sunrise Point-LP PCI 
> Express Root Port #9 [8086:9d18] (rev f1)
>      00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-LP LPC 
> Controller [8086:9d58] (rev 21)
>      00:1f.2 Memory controller [0580]: Intel Corporation Sunrise 
> Point-LP PMC [8086:9d21] (rev 21)
>      00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-LP HD 
> Audio [8086:9d71] (rev 21)
>      00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-LP SMBus 
> [8086:9d23] (rev 21)
>      01:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3 
> Bridge [Alpine Ridge 2C 2015] [8086:1576]
>      02:00.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3 
> Bridge [Alpine Ridge 2C 2015] [8086:1576]
>      02:01.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3 
> Bridge [Alpine Ridge 2C 2015] [8086:1576]
>      02:02.0 PCI bridge [0604]: Intel Corporation DSL6340 Thunderbolt 3 
> Bridge [Alpine Ridge 2C 2015] [8086:1576]
>      39:00.0 USB controller [0c03]: Intel Corporation DSL6340 USB 3.1 
> Controller [Alpine Ridge] [8086:15b5]
>      3a:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 
> 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
>      3b:00.0 Non-Volatile memory controller [0108]: SK hynix PC300 NVMe 
> Solid State Drive 512GB [1c5c:1284]
>
> As this is logged as an error, can this be fixed somehow?

This appears to be a platform problem. The hidden device (f0:1f.0) is
not visible to the OS, so no driver can program the interrupt remapping
table for the device's interrupts.

Best regards,
baolu