Re: [PATCH 2/3] ASoC: dt-bindings: xmos,xvf3500: add bindings for XMOS XVF3500

[Takashi Iwai]

On Tue, 16 Jan 2024 08:29:04 +0100,
Javier Carrasco wrote:
> 
> On 15.01.24 21:43, Krzysztof Kozlowski wrote:
> > On 15/01/2024 20:43, Javier Carrasco wrote:
> >> On 15.01.24 19:11, Krzysztof Kozlowski wrote:
> >>> On 15/01/2024 17:24, Javier Carrasco wrote:
> >>>> Do you mean that the XVF3500 should not be represented as a platform
> >>>> device and instead it should turn into an USB device represented as a
> >>>> node of an USB controller? Something like this (Rockchip SoC):
> >>>>
> >>>> &usb_host1_xhci {
> >>>> 	...
> >>>>
> >>>> 	xvf3500 {
> >>>> 		...
> >>>> 	};
> >>>> };
> >>>>
> >>>> Did I get you right or is that not the correct representation? Thank you
> >>>> again.
> >>>
> >>> I believe it should be just like onboard hub. I don't understand why
> >>> onboard hub was limited to hub, because other USB devices also could be
> >>> designed similarly by hardware folks :/
> >>>
> >>> And if we talk about Linux drivers, then your current solution does not
> >>> support suspend/resume and device unbind.
> >>>
> >>> Best regards,
> >>> Krzysztof
> >>>
> >>
> >> Actually this series is an attempt to get rid of a misuse of the
> >> onboard_usb_hub driver by a device that is not a HUB, but requires the
> >> platform-part of that driver for the initialization.
> > 
> > That's just naming issue, isn't it?
> > 
> >>
> >> What would be the best approach to provide support upstream? Should I
> >> turn this driver into a generic USB driver that does what the
> >> platform-part of the onboard HUB does? Or are we willing to accept
> > 
> > No, because you did not solve the problems I mentioned. This is neither
> > accurate hardware description nor proper Linux driver model handling PM
> > and unbind.
> > 
> You mentioned the PM handling twice, but I am not sure what you mean.
> The driver provides callbacks for SIMPLE_DEV_PM_OPS, which I tested in
> freeze and memory power states with positive results. On the other hand,
> I suppose that you insisted for a good reason, so I would be grateful if
> you could show me what I am doing wrong. The macro pattern was taken
> from other devices under sound/, which also check CONFIG_PM_SLEEP,
> but maybe I took a bad example or missed something.

FWIW, the patterns in sound/ are somewhat outdated and need to be
refreshed.  Nowadays one should use DEFINE_SIMPLE_DEV_PM_OPS() instead
(that should work without ifdef).


thanks,

Takashi