Re: [PATCH] media: i2c: ar0521: fix spellos

[Krzysztof Hałasa]

Hi Randy,

Good catches, thanks for your work.

Randy Dunlap <rdunlap@xxxxxxxxxxxxx> writes:

> Fix spelling mistakes as reported by codespell.

Acked-by: Krzysztof Hałasa <khalasa@xxxxxxx>

> --- a/drivers/media/i2c/ar0521.c
> +++ b/drivers/media/i2c/ar0521.c
> @@ -314,7 +314,7 @@ static void ar0521_calc_pll(struct ar052
>          * In the clock tree:
>          * MIPI_CLK = PIXEL_CLOCK * bpp / 2 / 2
>          *
> -        * Generic pixel_rate to bus clock frequencey equation:
> +        * Generic pixel_rate to bus clock frequency equation:
>          * MIPI_CLK = V4L2_CID_PIXEL_RATE * bpp / lanes / 2
>          *
>          * From which we derive the PIXEL_CLOCK to use in the clock tree:
> @@ -327,7 +327,7 @@ static void ar0521_calc_pll(struct ar052
>          *
>          * TODO: in case we have less data lanes we have to reduce the desired
>          * VCO not to exceed the limits specified by the datasheet and
> -        * consequentially reduce the obtained pixel clock.
> +        * consequently reduce the obtained pixel clock.
>          */
>         pixel_clock = AR0521_PIXEL_CLOCK_RATE * 2 / sensor->lane_count;
>         bpp = ar0521_code_to_bpp(sensor);
> @@ -806,7 +806,7 @@ static const struct initial_reg {
>         REGS(be(0x3F00),
>              be(0x0017),  /* 3F00: BM_T0 */
>              be(0x02DD),  /* 3F02: BM_T1 */
> -            /* 3F04: if Ana_gain less than 2, use noise_floor0, multipl */
> +            /* 3F04: if Ana_gain less than 2, use noise_floor0, multiply */
>              be(0x0020),
>              /* 3F06: if Ana_gain between 4 and 7, use noise_floor2 and */
>              be(0x0040),
>
>

-- 
Krzysztof "Chris" Hałasa

Sieć Badawcza Łukasiewicz
Przemysłowy Instytut Automatyki i Pomiarów PIAP
Al. Jerozolimskie 202, 02-486 Warszawa