[PATCH v2 6/6] arm64: dts: qcom: msm8956-loire: Add SD Card Detect to SDC2 pin states

[Marijn Suijten]

In addition to the SDC2 pins, set the SD Card Detect pin in a sane state
to be used as an interrupt when an SD Card is slotted in or removed.

Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
index b0b83edd3627..75412e37334c 100644
--- a/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi
@@ -264,10 +264,27 @@ &sdhc_1 {
 	status = "okay";
 };
 
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio100";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
 &sdc2_on_state {
 	clk-pins {
 		drive-strength = <10>;
 	};
+
+	sd-cd-pins {
+		pins = "gpio100";
+		function = "gpio";
+		drive-strength = <2>;
+		input-enable;
+		bias-pull-up;
+	};
 };
 
 &sdhc_2 {

-- 
2.43.0