Re: [PATCH v8 02/16] PCI: imx6: Simplify phy handling by using IMX6_PCIE_FLAG_HAS_PHYDRV

[Manivannan Sadhasivam]

On Mon, Jan 08, 2024 at 06:21:31PM -0500, Frank Li wrote:
> Add IMX6_PCIE_FLAG_HAS_PHYDRV bitmask define for drvdata::flags. Reduce
> switch-case structure for handling phy.
> 

"Since some i.MX platforms make use of the separate PHY driver, use
IMX6_PCIE_FLAG_HAS_PHYDRV flag to identify them and get the reference to PHY
from DT. This simplifies the code."

> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

- Mani

> ---
> 
> Notes:
>     Change from v7 to v8:
>     - renmae IMX6_PCIE_FLAG_HAS_PHY to IMX6_PCIE_FLAG_HAS_PHYDRV
>     Change from v6 to v7:
>     - none
>     Change from v4 to v5:
>     - none, Keep IMX6_PCIE_FLAG_HAS_PHY to indicate dts mismatch when platform
>     require phy suppport.
>     
>     Change from v1 to v3:
>     - none
> 
>  drivers/pci/controller/dwc/pci-imx6.c | 24 +++++++++++++++++-------
>  1 file changed, 17 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 4912c6b08ecf8..adc90099ec7f8 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -60,6 +60,9 @@ enum imx6_pcie_variants {
>  #define IMX6_PCIE_FLAG_IMX6_PHY			BIT(0)
>  #define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE	BIT(1)
>  #define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND		BIT(2)
> +#define IMX6_PCIE_FLAG_HAS_PHYDRV			BIT(3)
> +
> +#define imx6_check_flag(pci, val)     (pci->drvdata->flags & val)
>  
>  #define IMX6_PCIE_MAX_CLKS       6
>  
> @@ -1277,6 +1280,13 @@ static int imx6_pcie_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> +	if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_PHYDRV)) {
> +		imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
> +		if (IS_ERR(imx6_pcie->phy))
> +			return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
> +					     "failed to get pcie phy\n");
> +	}
> +
>  	switch (imx6_pcie->drvdata->variant) {
>  	case IMX7D:
>  		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
> @@ -1306,11 +1316,6 @@ static int imx6_pcie_probe(struct platform_device *pdev)
>  			return dev_err_probe(dev, PTR_ERR(imx6_pcie->apps_reset),
>  					     "failed to get pcie apps reset control\n");
>  
> -		imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
> -		if (IS_ERR(imx6_pcie->phy))
> -			return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
> -					     "failed to get pcie phy\n");
> -
>  		break;
>  	default:
>  		break;
> @@ -1458,14 +1463,17 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  	},
>  	[IMX8MM] = {
>  		.variant = IMX8MM,
> -		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> +		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
> +			 IMX6_PCIE_FLAG_HAS_PHYDRV |
> +			 IMX6_PCIE_FLAG_HAS_APP_RESET,
>  		.gpr = "fsl,imx8mm-iomuxc-gpr",
>  		.clk_names = imx6_3clks_bus_pcie_aux,
>  		.clks_cnt = ARRAY_SIZE(imx6_3clks_bus_pcie_aux),
>  	},
>  	[IMX8MP] = {
>  		.variant = IMX8MP,
> -		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
> +		.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
> +			 IMX6_PCIE_FLAG_HAS_PHYDRV,
>  		.gpr = "fsl,imx8mp-iomuxc-gpr",
>  		.clk_names = imx6_3clks_bus_pcie_aux,
>  		.clks_cnt = ARRAY_SIZE(imx6_3clks_bus_pcie_aux),
> @@ -1479,6 +1487,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  	},
>  	[IMX8MM_EP] = {
>  		.variant = IMX8MM_EP,
> +		.flags = IMX6_PCIE_FLAG_HAS_PHYDRV,
>  		.mode = DW_PCIE_EP_TYPE,
>  		.gpr = "fsl,imx8mm-iomuxc-gpr",
>  		.clk_names = imx6_3clks_bus_pcie_aux,
> @@ -1486,6 +1495,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
>  	},
>  	[IMX8MP_EP] = {
>  		.variant = IMX8MP_EP,
> +		.flags = IMX6_PCIE_FLAG_HAS_PHYDRV,
>  		.mode = DW_PCIE_EP_TYPE,
>  		.gpr = "fsl,imx8mp-iomuxc-gpr",
>  		.clk_names = imx6_3clks_bus_pcie_aux,
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்