[PATCH] i3c: dw: Disable IBI IRQ depends on hot-join and SIR enabling

[Dylan Hung]

Disable IBI IRQ signal and status only when hot-join and SIR enabling of
all target devices attached to the bus are disabled.

Fixes: e389b1d72a62 ("i3c: dw: Add support for in-band interrupts")

Signed-off-by: Dylan Hung <dylan_hung@xxxxxxxxxxxxxx>
---
 drivers/i3c/master/dw-i3c-master.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/i3c/master/dw-i3c-master.c b/drivers/i3c/master/dw-i3c-master.c
index ef5751e91cc9..276153e10f5a 100644
--- a/drivers/i3c/master/dw-i3c-master.c
+++ b/drivers/i3c/master/dw-i3c-master.c
@@ -1163,8 +1163,10 @@ static void dw_i3c_master_set_sir_enabled(struct dw_i3c_master *master,
 		global = reg == 0xffffffff;
 		reg &= ~BIT(idx);
 	} else {
-		global = reg == 0;
+		bool hj_rejected = !!(readl(master->regs + DEVICE_CTRL) & DEV_CTRL_HOT_JOIN_NACK);
+
 		reg |= BIT(idx);
+		global = (reg == 0xffffffff) && hj_rejected;
 	}
 	writel(reg, master->regs + IBI_SIR_REQ_REJECT);
 
-- 
2.25.1