[net v3 PATCH 1/1] net: mvpp2: clear BM pool before initialization

[Jenishkumar Maheshbhai Patel]

Register value persist after booting the kernel using
kexec which results in kernel panic. Thus clear the
BM pool registers before initialisation to fix the issue.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Jenishkumar Maheshbhai Patel <jpatel2@xxxxxxxxxxx>
---
v1-v2:
-Move comments outside the loop
-remove unrequired brances.
v2-v3:
-improve readability
-correct register read API

 .../net/ethernet/marvell/mvpp2/mvpp2_main.c   | 33 ++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 820b1fabe297..cab319287522 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -614,12 +614,44 @@ static void mvpp23_bm_set_8pool_mode(struct mvpp2 *priv)
 	mvpp2_write(priv, MVPP22_BM_POOL_BASE_ADDR_HIGH_REG, val);
 }
 
+/* Cleanup pool before actual initialization in the OS */
+static void mvpp2_bm_pool_cleanup(struct mvpp2 *priv, int pool_id)
+{
+	u32 val;
+	int i;
+	unsigned int thread = mvpp2_cpu_to_thread(priv, get_cpu());
+
+	/* Drain the BM from all possible residues left by firmware */
+	for (i = 0; i < MVPP2_BM_POOL_SIZE_MAX; i++)
+		mvpp2_thread_read(priv, thread, MVPP2_BM_PHY_ALLOC_REG(pool_id));
+
+	/* Stop the BM pool */
+	val = mvpp2_read(priv, MVPP2_BM_POOL_CTRL_REG(pool_id));
+	val |= MVPP2_BM_STOP_MASK;
+	mvpp2_write(priv, MVPP2_BM_POOL_CTRL_REG(pool_id), val);
+
+	/* Mask BM all interrupts */
+	mvpp2_write(priv, MVPP2_BM_INTR_MASK_REG(pool_id), 0);
+
+	/* Clear BM cause register */
+	mvpp2_write(priv, MVPP2_BM_INTR_CAUSE_REG(pool_id), 0);
+
+	put_cpu();
+}
+
 static int mvpp2_bm_init(struct device *dev, struct mvpp2 *priv)
 {
 	enum dma_data_direction dma_dir = DMA_FROM_DEVICE;
 	int i, err, poolnum = MVPP2_BM_POOLS_NUM;
 	struct mvpp2_port *port;
 
+	if (priv->percpu_pools)
+		poolnum = mvpp2_get_nrxqs(priv) * 2;
+
+	/* Clean up the pool state in case it contains stale state */
+	for (i = 0; i < poolnum; i++)
+		mvpp2_bm_pool_cleanup(priv, i);
+
 	if (priv->percpu_pools) {
 		for (i = 0; i < priv->port_count; i++) {
 			port = priv->port_list[i];
@@ -629,7 +661,6 @@ static int mvpp2_bm_init(struct device *dev, struct mvpp2 *priv)
 			}
 		}
 
-		poolnum = mvpp2_get_nrxqs(priv) * 2;
 		for (i = 0; i < poolnum; i++) {
 			/* the pool in use */
 			int pn = i / (poolnum / 2);
-- 
2.25.1