Re: [PATCH 1/3] dt-bindings: display: convert Atmel's HLCDC to DT schema

[Dharma.B]

Hi Rob,
On 10/01/24 5:27 pm, Rob Herring wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On Wed, 10 Jan 2024 15:55:33 +0530, Dharma Balasubiramani wrote:
>> Convert the existing DT binding to DT schema of the Atmel's HLCDC display
>> controller.
>>
>> Signed-off-by: Dharma Balasubiramani <dharma.b@xxxxxxxxxxxxx>
>> ---
>>   .../display/atmel/atmel,hlcdc-dc.yaml         | 133 ++++++++++++++++++
>>   .../bindings/display/atmel/hlcdc-dc.txt       |  75 ----------
>>   2 files changed, 133 insertions(+), 75 deletions(-)
>>   create mode 100644 Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-dc.yaml
>>   delete mode 100644 Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> I conducted the tests after applying all three of them, so I didn't 
notice these errors. I have addressed this in v2. Thank you.

-- 
With Best Regards,
Dharma B.
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-dc.example.dtb: /example-0/hlcdc@f0030000: failed to match any schema with compatible: ['atmel,sama5d3-hlcdc']
> Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-dc.example.dtb: /example-0/hlcdc@f0030000/hlcdc-pwm: failed to match any schema with compatible: ['atmel,hlcdc-pwm']
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240110102535.246177-2-dharma.b@xxxxxxxxxxxxx
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>