[PATCH 1/4] serial: max310x: set default value when reading clock ready bit

[Hugo Villeneuve]

From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>

If regmap_read() returns a non-zero value, the 'val' variable can be left
uninitialized.

Clear it before calling regmap_read() to make sure we properly detect
the clock ready bit.

Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
---
 drivers/tty/serial/max310x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index f3a99daebdaa..b2c753ba9cbf 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -641,7 +641,7 @@ static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s,
 
 	/* Wait for crystal */
 	if (xtal) {
-		unsigned int val;
+		unsigned int val = 0;
 		msleep(10);
 		regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val);
 		if (!(val & MAX310X_STS_CLKREADY_BIT)) {
-- 
2.39.2