[PATCH 1/2] arm64: dts: rockchip: rock-pi-e: adjust phy-handle name

[Trevor Woerner]

The rock-pi-e currently comes in 4 board spins, the latest one (v1.21)
swaps out the Realtek 8211e PHY for an 8211f PHY. Therefore modify the
phy-handle name to be more generic.

Signed-off-by: Trevor Woerner <twoerner@xxxxxxxxx>
---
 arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
index 018a3a5075c7..096cfa19036e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
@@ -146,7 +146,7 @@ &gmac2io {
 	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
 	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
 	clock_in_out = "input";
-	phy-handle = <&rtl8211e>;
+	phy-handle = <&rtl8211>;
 	phy-mode = "rgmii";
 	phy-supply = <&vcc_io>;
 	pinctrl-names = "default";
@@ -163,7 +163,7 @@ mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		rtl8211e: ethernet-phy@1 {
+		rtl8211: ethernet-phy@1 {
 			reg = <1>;
 			pinctrl-0 = <&eth_phy_int_pin>, <&eth_phy_reset_pin>;
 			pinctrl-names = "default";
-- 
2.43.0.76.g1a87c842ece3