[PATCH AUTOSEL 6.7 012/108] ARM: dts: qcom: msm8660: fix PMIC node labels

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

[ Upstream commit c6d86aa8a12194d1c9c2f9108910a46c8a3ddc90 ]

Change PM8058 node labels to start with pm8058_ prefix, following other
Qualcomm PMIC device nodes.

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20230928110309.1212221-11-dmitry.baryshkov@xxxxxxxxxx
Signed-off-by: Bjorn Andersson <andersson@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 .../boot/dts/qcom/qcom-apq8060-dragonboard.dts   |  4 ++--
 arch/arm/boot/dts/qcom/qcom-msm8660.dtsi         | 16 ++++++++--------
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
index 569cbf0d8df8..94351c9bf94b 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts
@@ -71,7 +71,7 @@ cm3605 {
 		/* Trig on both edges - getting close or far away */
 		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
 		/* MPP05 analog input to the XOADC */
-		io-channels = <&xoadc 0x00 0x05>;
+		io-channels = <&pm8058_xoadc 0x00 0x05>;
 		io-channel-names = "aout";
 		pinctrl-names = "default";
 		pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>;
@@ -944,7 +944,7 @@ irq-pins {
 	};
 };
 
-&xoadc {
+&pm8058_xoadc {
 	/* Reference voltage 2.2 V */
 	xoadc-ref-supply = <&pm8058_l18>;
 
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index 78023ed2fdf7..9217ced108c4 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -80,13 +80,13 @@ sleep-clk {
 	 */
 	iio-hwmon {
 		compatible = "iio-hwmon";
-		io-channels = <&xoadc 0x00 0x01>, /* Battery */
-			    <&xoadc 0x00 0x02>, /* DC in (charger) */
-			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
-			    <&xoadc 0x00 0x0b>, /* Die temperature */
-			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
-			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
-			    <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
+		io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
+			      <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
+			      <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
+			      <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
+			      <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			      <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			      <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
 	};
 
 	soc: soc {
@@ -390,7 +390,7 @@ pm8058_keypad: keypad@148 {
 					row-hold = <91500>;
 				};
 
-				xoadc: xoadc@197 {
+				pm8058_xoadc: xoadc@197 {
 					compatible = "qcom,pm8058-adc";
 					reg = <0x197>;
 					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
-- 
2.43.0