Re: [PATCH v11 1/2] dt-bindings: adc: add AD7173

From: David Lechner
Date: Mon Jan 15 2024 - 16:54:04 EST


On Wed, Dec 20, 2023 at 4:48 AM Dumitru Ceclan <mitrutzceclan@gmailcom> wrote:
>
> The AD7173 family offer a complete integrated Sigma-Delta ADC solution
> which can be used in high precision, low noise single channel applications
> or higher speed multiplexed applications. The Sigma-Delta ADC is intended
> primarily for measurement of signals close to DC but also delivers
> outstanding performance with input bandwidths out to ~10kHz.
>
> Signed-off-by: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
> ---

Sorry for the late reply as I see this has been applied already but...

(I've been going over the datasheets for these and other related parts
(AD411x) in detail today so please CC me on future updates to the
bindings/driver for these if you don't mind)

> .../bindings/iio/adc/adi,ad7173.yaml | 188 ++++++++++++++++++
> 1 file changed, 188 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml
> new file mode 100644
> index 000000000000..7c8caef76528
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml
> @@ -0,0 +1,188 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2023 Analog Devices Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/adi,ad7173.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AD7173 ADC
> +
> +maintainers:
> + - Ceclan Dumitru <dumitru.ceclan@xxxxxxxxxx>
> +
> +description: |
> + Bindings for the Analog Devices AD717X ADC's. Datasheets for supported chips:
> + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf
> + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf
> +
> +properties:
> + compatible:
> + enum:
> + - adi,ad7172-2
> + - adi,ad7173-8
> + - adi,ad7175-2
> + - adi,ad7176-2
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1

As discussed in v8 [1] it is not clear what signal this is. Based on
that discussion, I'm assuming the RDY signal, but how would bindings
consumers know that without a description since it is not the only
digital output signal of the chip? And why the ERROR signal was
omitted here was never addressed AFAICT.

[1]: https://lore.kernel.org/linux-iio/20231217135007.3e5d959a@jic23-huawei/

> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + spi-max-frequency:
> + maximum: 20000000
> +

According to the timing diagram in the datasheet, SCLK is high during
idle, so don't we need `spi-cpol: true` here?

Likewise, data is valid on the trailing SCLK edge, so don't we need
`spi-cpha: true` here?


> + gpio-controller:
> + description: Marks the device node as a GPIO controller.
> +
> + "#gpio-cells":
> + const: 2
> + description:
> + The first cell is the GPIO number and the second cell specifies
> + GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
> +
> + refin-supply:
> + description: external reference supply, can be used as reference for conversion.

If I'm understanding correctly, this represents both voltage inputs
REF+ and REF-, correct? The datasheet says "Reference Input Negative
Terminal. REF− can span from AVSS to AVDD1 − 1 V". It seems like they
should be separate supplies in case REF- is non-zero. Otherwise, how
can we know what voltage it is? (same comment applies to refin2.)

> +
> + refin2-supply:
> + description: external reference supply, can be used as reference for conversion.
> +
> + avdd-supply:
> + description: avdd supply, can be used as reference for conversion.
> +
> + avdd2-supply:
> + description: avdd2 supply, used as the input to the internal voltage regulator.
> +
> + iovdd-supply:
> + description: iovdd supply, used for the chip digital interface.
> +

I overlooked this before, but these chips also have an optional
external clock input so it seems like they should have an optional
clocks property as well.

> +patternProperties:
> + "^channel@[0-9a-f]$":
> + type: object
> + $ref: adc.yaml
> + unevaluatedProperties: false
> +
> + properties:
> + reg:
> + minimum: 0
> + maximum: 15
> +
> + diff-channels:
> + items:
> + minimum: 0
> + maximum: 31
> +
> + adi,reference-select:
> + description: |
> + Select the reference source to use when converting on
> + the specific channel. Valid values are:
> + refin : REFIN(+)/REFIN(−).
> + refin2 : REFIN2(+)/REFIN2(−)
> + refout-avss: REFOUT/AVSS (Internal reference)
> + avdd : AVDD
> +
> + External reference refin2 only available on ad7173-8.
> + If not specified, internal reference used.
> + $ref: /schemas/types.yaml#/definitions/string
> + enum:
> + - refin
> + - refin2
> + - refout-avss
> + - avdd
> + default: refout-avss
> +
> + required:
> + - reg
> + - diff-channels
> +
> +required:
> + - compatible
> + - reg
> + - interrupts

Why are interrupts required? What if the pin is not connected?

> +
> +allOf:
> + - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> + - if:
> + properties:
> + compatible:
> + not:
> + contains:
> + const: adi,ad7173-8
> + then:
> + properties:
> + refin2-supply: false
> + patternProperties:
> + "^channel@[0-9a-f]$":
> + properties:
> + adi,reference-select:
> + enum:
> + - refin
> + - refout-avss
> + - avdd
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adc@0 {
> + compatible = "adi,ad7173-8";
> + reg = <0>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-parent = <&gpio>;
> + spi-max-frequency = <5000000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + refin-supply = <&dummy_regulator>;
> +
> + channel@0 {
> + reg = <0>;
> + bipolar;
> + diff-channels = <0 1>;
> + adi,reference-select = "refin";
> + };
> +
> + channel@1 {
> + reg = <1>;
> + diff-channels = <2 3>;
> + };
> +
> + channel@2 {
> + reg = <2>;
> + bipolar;
> + diff-channels = <4 5>;
> + };
> +
> + channel@3 {
> + reg = <3>;
> + bipolar;
> + diff-channels = <6 7>;
> + };
> +
> + channel@4 {
> + reg = <4>;
> + diff-channels = <8 9>;
> + adi,reference-select = "avdd";
> + };
> + };
> + };
> --
> 2.42.0
>
>