[PATCH v3 0/5] Add support for LTC6373

From: Dumitru Ceclan
Date: Mon Jan 15 2024 - 08:30:41 EST


This patch series adds support for the LTC6373 Instrumentation Amplifier within
the existing HMC425A driver.

The LTC6373 is a silicon, 3-bit Fully-Differential digital instrumentation
amplifier that supports the following programmable gains (Vout/Vin):
G = 0.25, 0.5, 1, 2, 4, 8, 16 + Shutdown.
The programmable interface consists of 3 digitally controled inputs.

V2->V3
- Use return instead of break in *_gain_dB_to_code()
- Add new line before return in *_code_to_gain_dB()
- Match parameter alignment for added _powerdown functions
- Add precursor patch for using pointers in the match table
- Add chip_info attributes: has_powerdown and powerdown_val
- Change probe logic to use has_powerdown for default powerdown state
- Added 'Fixes' tag to commit message of 'add conditional GPIO array...'
V1->V2
Driver:
- Fix chip info table indent
- Remove enable attribute
- Add ext_info powerdown attribute
- Enable by default powerdown attribute
- Set default gain after disabling powerdown to min value
Binding:
- Fix conditional checking of GPIO array size for LTC6373
- Add precursor commit for correctly checking gpio size depending upon compatible

Dumitru Ceclan (5):
dt-bindings: iio: hmc425a: add conditional GPIO array size constraints
dt-bindings: iio: hmc425a: add entry for LTC6373
iio: amplifiers: hmc425a: move conversion logic
iio: amplifiers: hmc425a: use pointers in match table
iio: amplifiers: hmc425a: add support for LTC6373 Instrumentation
Amplifier

.../bindings/iio/amplifiers/adi,hmc425a.yaml | 47 +++-
drivers/iio/amplifiers/hmc425a.c | 253 +++++++++++++-----
2 files changed, 236 insertions(+), 64 deletions(-)

--
2.42.0