Re: [PATCH net-next 00/15] net/smc: implement loopback-ism used by SMC-D

From: Wen Gu
Date: Sat Jan 13 2024 - 04:22:44 EST




On 2024/1/12 23:50, Jiri Pirko wrote:
Fri, Jan 12, 2024 at 01:32:14PM CET, guwen@xxxxxxxxxxxxxxxxx wrote:


On 2024/1/12 17:10, Jiri Pirko wrote:
Fri, Jan 12, 2024 at 09:29:35AM CET, guwen@xxxxxxxxxxxxxxxxx wrote:


<...>

# Benchmark Test

* Test environments:
- VM with Intel Xeon Platinum 8 core 2.50GHz, 16 GiB mem.
- SMC sndbuf/DMB size 1MB.
- /sys/devices/virtual/smc/loopback-ism/dmb_copy is set to default 0,
which means sndbuf and DMB are merged and no data copied between them.
- /sys/devices/virtual/smc/loopback-ism/dmb_type is set to default 0,

Exposing any configuration knobs and statistics over sysfs for
softdevices does not look correct at all :/ Could you please avoid
sysfs?


In previous reviews and calls, we think loopback-ism needs to be more
like a device and be visible under /sys/devices.

Would you mind explaining why using sysfs for loopback-ism is not correct?
since I saw some other configurations or statistics exists under /sys/devices,
e.g. /sys/devices/virtual/net/lo. Thank you!

You have smc_netlink.c exposing clear netlink api for the subsystem.
Can't you extend it to contain the configuration knobs and expose stats
instead of sysfs?


Thank you for the suggestion. I've also considered this approach.

But I didn't choose to extend the smc netlink because for now smc netlink
are used for SMC protocol related attributes, for example:

SMC_NETLINK_GET_SYS_INFO: SMC version, release, v2-capable..
SMC_NETLINK_GET_LGR_SMC{R|D}: SMC-{R|D} link group inform (lgr id, lgr conn num, lgr role..)
SMC_NETLINK_GET_LINK_SMCR: SMC-R link inform (link id, link state, conn cnt..)
SMC_NETLINK_GET_DEV_SMCD: SMC-D device generic inform (user cnt, pci_fid, pci_chid, pci_vendor..)
SMC_NETLINK_GET_DEV_SMCR: SMC-R device generic inform (dev name, port pnet_id, port valid, port state..)
SMC_NETLINK_GET_STATS: SMC generic stats (RMB cnt, Tx size, Rx size, RMB size...)

And the knobs and stats in this patchset are loopback-ism device specific
attributes, for example:

active: loopback-ism runtime switch
dmb_type: type of DMB provided by loopback-ism
dmb_copy: support for DMB merge of loopback-ism
xfer_bytes: data transferred by loopback-ism
dmbs_cnt: DMB num provided by loopback-ism

The layer will be:

+--------------------------------------+
| |
| SMC protocol |
| (attrs by netlink in smc_netlink.c) |
| |
+--------------------------------------+
------------------smcd_ops------------------
+---------------+ +---------------------+ +--------------+
| loopback-ism | | s390 firmware ISM | | Possible |
+---------------+ | | | other |
(attrs by sysfs | | | virtual ISM |
in smc_loopback.c) | | | |
| | | |
+---------------------+ +--------------+

So nest it:
SMC_NETLINK_BACKEND_GET_INFO
SMC_NETLINK_BACKEND_GET_STATS
?
I mean, isn't it better to have the backend knobs and stats in one place
under same netlink commands and attributes than random sysfs path ?

Thank you for suggestion.

I think it is not about nesting or gathering knobs and stats. It is
about not coupling underlying device details to upper layer SMC stack.

From SMC perspective, it cares about the abstract operations defined
by smcd_ops, regardless of which underlying devices provide these
functions and how they provide. So IMO the details or configurations
of underlying devices shouldn't be involved in SMC.

Besides, the knobs and stats here are specific for loopback-ism device,
they include runtime switch, buffer type choice and mode choice of
loopback-ism (basically they won't change after being set once). The
other kinds of devices used by SMC-D, e.g. s390 firmware ISM or other
virtual ISMs have no similar things.

So I prefer to keep the current solution instead of expanding upper
layer SMC netlink.

Thanks,
Wen Gu




So I choose to use current way to provide this lower layer loopback-ism
device's attributes, restrict loopback-ism specific code to smc_loopback.c
and try to make a clear layer architecture.

Thanks,
Wen Gu




Thanks again,
Wen Gu


which means DMB is physically contiguous buffer.

* Test object:
- TCP: run on TCP loopback.
- SMC lo: run on SMC loopback device.

1. ipc-benchmark (see [3])

- ./<foo> -c 1000000 -s 100

TCP SMC-lo
Message
rate (msg/s) 80636 149515(+85.42%)

2. sockperf

- serv: <smc_run> taskset -c <cpu> sockperf sr --tcp
- clnt: <smc_run> taskset -c <cpu> sockperf { tp | pp } --tcp --msg-size={ 64000 for tp | 14 for pp } -i 127.0.0.1 -t 30

TCP SMC-lo
Bandwidth(MBps) 4909.36 8197.57(+66.98%)
Latency(us) 6.098 3.383(-44.52%)

3. nginx/wrk

- serv: <smc_run> nginx
- clnt: <smc_run> wrk -t 8 -c 1000 -d 30 http://127.0.0.1:80

TCP SMC-lo
Requests/s 181685.74 246447.77(+35.65%)

4. redis-benchmark

- serv: <smc_run> redis-server
- clnt: <smc_run> redis-benchmark -h 127.0.0.1 -q -t set,get -n 400000 -c 200 -d 1024

TCP SMC-lo
GET(Requests/s) 85855.34 118553.64(+38.09%)
SET(Requests/s) 86824.40 125944.58(+45.06%)


Change log:

v1->RFC:
- Patch #9: merge rx_bytes and tx_bytes as xfer_bytes statistics:
/sys/devices/virtual/smc/loopback-ism/xfer_bytes
- Patch #10: add support_dmb_nocopy operation to check if SMC-D device supports
merging sndbuf with peer DMB.
- Patch #13 & #14: introduce loopback-ism device control of DMB memory type and
control of whether to merge sndbuf and DMB. They can be respectively set by:
/sys/devices/virtual/smc/loopback-ism/dmb_type
/sys/devices/virtual/smc/loopback-ism/dmb_copy
The motivation for these two control is that a performance bottleneck was
found when using vzalloced DMB and sndbuf is merged with DMB, and there are
many CPUs and CONFIG_HARDENED_USERCOPY is set [4]. The bottleneck is caused
by the lock contention in vmap_area_lock [5] which is involved in memcpy_from_msg()
or memcpy_to_msg(). Currently, Uladzislau Rezki is working on mitigating the
vmap lock contention [6]. It has significant effects, but using virtual memory
still has additional overhead compared to using physical memory.
So this new version provides controls of dmb_type and dmb_copy to suit
different scenarios.
- Some minor changes and comments improvements.

RFC->old version([1]):
Link: https://lore.kernel.org/netdev/1702214654-32069-1-git-send-email-guwen@xxxxxxxxxxxxxxxxx/
- Patch #1: improve the loopback-ism dump, it shows as follows now:
# smcd d
FID Type PCI-ID PCHID InUse #LGs PNET-ID
0000 0 loopback-ism ffff No 0
- Patch #3: introduce the smc_ism_set_v2_capable() helper and set
smc_ism_v2_capable when ISMv2 or virtual ISM is registered,
regardless of whether there is already a device in smcd device list.
- Patch #3: loopback-ism will be added into /sys/devices/virtual/smc/loopback-ism/.
- Patch #8: introduce the runtime switch /sys/devices/virtual/smc/loopback-ism/active
to activate or deactivate the loopback-ism.
- Patch #9: introduce the statistics of loopback-ism by
/sys/devices/virtual/smc/loopback-ism/{{tx|rx}_tytes|dmbs_cnt}.
- Some minor changes and comments improvements.

[1] https://lore.kernel.org/netdev/1695568613-125057-1-git-send-email-guwen@xxxxxxxxxxxxxxxxx/
[2] https://lore.kernel.org/netdev/20231219142616.80697-1-guwen@xxxxxxxxxxxxxxxxx/
[3] https://github.com/goldsborough/ipc-bench
[4] https://lore.kernel.org/all/3189e342-c38f-6076-b730-19a6efd732a5@xxxxxxxxxxxxxxxxx/
[5] https://lore.kernel.org/all/238e63cd-e0e8-4fbf-852f-bc4d5bc35d5a@xxxxxxxxxxxxxxxxx/
[6] https://lore.kernel.org/all/20240102184633.748113-1-urezki@xxxxxxxxx/

Wen Gu (15):
net/smc: improve SMC-D device dump for virtual ISM
net/smc: decouple specialized struct from SMC-D DMB registration
net/smc: introduce virtual ISM device loopback-ism
net/smc: implement ID-related operations of loopback-ism
net/smc: implement some unsupported operations of loopback-ism
net/smc: implement DMB-related operations of loopback-ism
net/smc: register loopback-ism into SMC-D device list
net/smc: introduce loopback-ism runtime switch
net/smc: introduce loopback-ism statistics attributes
net/smc: add operations to merge sndbuf with peer DMB
net/smc: attach or detach ghost sndbuf to peer DMB
net/smc: adapt cursor update when sndbuf and peer DMB are merged
net/smc: introduce loopback-ism DMB type control
net/smc: introduce loopback-ism DMB data copy control
net/smc: implement DMB-merged operations of loopback-ism

drivers/s390/net/ism_drv.c | 2 +-
include/net/smc.h | 7 +-
net/smc/Kconfig | 13 +
net/smc/Makefile | 2 +-
net/smc/af_smc.c | 28 +-
net/smc/smc_cdc.c | 58 ++-
net/smc/smc_cdc.h | 1 +
net/smc/smc_core.c | 61 +++-
net/smc/smc_core.h | 1 +
net/smc/smc_ism.c | 71 +++-
net/smc/smc_ism.h | 5 +
net/smc/smc_loopback.c | 718 +++++++++++++++++++++++++++++++++++++
net/smc/smc_loopback.h | 88 +++++
13 files changed, 1026 insertions(+), 29 deletions(-)
create mode 100644 net/smc/smc_loopback.c
create mode 100644 net/smc/smc_loopback.h

--
2.32.0.3.g01195cf9f