[PATCH v2 2/5] dt-bindings: rtc: abx80x: convert to yaml

[Josua Mayer]

Convert the abracon abx80x rtc text bindings to dt-schema format.

Additionally added "interrupts" property which was missing from text
format, because abx80x and driver support them.

Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx>
---
 .../devicetree/bindings/rtc/abracon,abx80x.txt     | 31 ------------
 .../devicetree/bindings/rtc/abracon,abx80x.yaml    | 56 ++++++++++++++++++++++
 2 files changed, 56 insertions(+), 31 deletions(-)

diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
deleted file mode 100644
index 2405e35a1bc0..000000000000
--- a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Abracon ABX80X I2C ultra low power RTC/Alarm chip
-
-The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
-ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
-is the superset of ab180x.
-
-Required properties:
-
- - "compatible": should one of:
-        "abracon,abx80x"
-        "abracon,ab0801"
-        "abracon,ab0803"
-        "abracon,ab0804"
-        "abracon,ab0805"
-        "abracon,ab1801"
-        "abracon,ab1803"
-        "abracon,ab1804"
-        "abracon,ab1805"
-        "microcrystal,rv1805"
-	Using "abracon,abx80x" will enable chip autodetection.
- - "reg": I2C bus address of the device
-
-Optional properties:
-
-The abx804 and abx805 have a trickle charger that is able to charge the
-connected battery or supercap. Both the following properties have to be defined
-and valid to enable charging:
-
- - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
- - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
-                          resistor, the other values are in kOhm.
diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
new file mode 100644
index 000000000000..c80d4a46a044
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/abracon,abx80x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+maintainers: []
+
+allOf:
+  - $ref: rtc.yaml#
+
+properties:
+  compatible:
+    anyOf:
+      - description: auto-detection from id register
+        const: abracon,abx80x
+      - const: abracon,,ab0801
+      - const: abracon,,ab0803
+      - const: abracon,,ab0804
+      - const: abracon,,ab0805
+      - const: abracon,,ab1801
+      - const: abracon,,ab1803
+      - const: abracon,,ab1804
+      - const: abracon,,ab1805
+      - const: microcrystal,rv1805
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  abracon,tc-diode:
+    description:
+      Trickle-charge diode type.
+      Required to enable charging backup battery.
+    anyOf:
+      - description: standard diode with 0.6V drop
+        const: standard
+      - description: schottky diode with 0.3V drop
+        const: schottky
+
+  abracon,tc-resistor:
+    description:
+      Trickle-charge resistor value in kOhm.
+      Required to enable charging backup battery.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 3, 6, 11]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false

-- 
2.35.3