Re: [PATCH 1/3] dt-bindings: net: dp83826: add ti,cfg-dac-minus binding

From: Krzysztof Kozlowski
Date: Fri Jan 12 2024 - 08:47:49 EST


On 12/01/2024 14:41, POPESCU Catalin wrote:
> On 11.01.24 18:21, Krzysztof Kozlowski wrote:
>> [You don't often get email from krzysztof.kozlowski@xxxxxxxxxx. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>>
>> This email is not from Hexagon’s Office 365 instance. Please be careful while clicking links, opening attachments, or replying to this email.
>>
>>
>> On 11/01/2024 17:59, POPESCU Catalin wrote:
>>> On 11.01.24 17:52, Russell King (Oracle) wrote:
>>>> This email is not from Hexagon’s Office 365 instance. Please be careful while clicking links, opening attachments, or replying to this email.
>>>>
>>>>
>>>> On Thu, Jan 11, 2024 at 04:45:26PM +0000, POPESCU Catalin wrote:
>>>>> On 11.01.24 17:35, Andrew Lunn wrote:
>>>>>> [You don't often get email from andrew@xxxxxxx. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>>>>>>
>>>>>> This email is not from Hexagon’s Office 365 instance. Please be careful while clicking links, opening attachments, or replying to this email.
>>>>>>
>>>>>>
>>>>>> On Thu, Jan 11, 2024 at 05:19:25PM +0100, Catalin Popescu wrote:
>>>>>>> Add property ti,cfg-dac-minus to allow for voltage tuning
>>>>>>> of logical level -1 of the MLT-3 encoded data.
>>>>>>>
>>>>>>> Signed-off-by: Catalin Popescu <catalin.popescu@xxxxxxxxxxxxxxxxxxxx>
>>>>>>> ---
>>>>>>> Documentation/devicetree/bindings/net/ti,dp83822.yaml | 9 +++++++++
>>>>>>> 1 file changed, 9 insertions(+)
>>>>>>>
>>>>>>> diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
>>>>>>> index db74474207ed..2f010333be49 100644
>>>>>>> --- a/Documentation/devicetree/bindings/net/ti,dp83822.yaml
>>>>>>> +++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
>>>>>>> @@ -62,6 +62,15 @@ properties:
>>>>>>> for the PHY. The internal delay for the PHY is fixed to 3.5ns relative
>>>>>>> to transmit data.
>>>>>>>
>>>>>>> + ti,cfg-dac-minus:
>>>>>>> + description: |
>>>>>>> + DP83826 PHY only.
>>>>>>> + Sets the voltage ratio of the logical level -1 for the MLT-3 encoded data.
>>>>>>> + 0 = 50%, 1 = 56.25%, 2 = 62.50%, 3 = 68.75%, 4 = 75%, 5 = 81.25%, 6 = 87.50%,
>>>>>>> + 7 = 93.75%, 8 = 100%, 9 = 106.25%, 10 = 112.50%, 11 = 118.75%, 12 = 125%,
>>>>>>> + 13 = 131.25%, 14 = 137.50%, 15 = 143.75%, 16 = 150%.
>>>>>>> + enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16]
>>>>>> We try to avoid register values in DT. We use real units. This is a
>>>>>> voltage you are configuring, so can you change the unit to millivolts?
>>>>>> Have the driver do the conversion of volts to register value.
>>>>>>
>>>>>> Is it possible to configure any of the other logical levels?
>>>>> Hi Andrew,
>>>>> These are not raw register values and these are not voltage values but
>>>>> voltage ratios. I'm mapping the voltage ratios to enum values [0-16]
>>>>> which are converted to register raw values by the driver. I don't see a
>>>>> better way to do this.
>>>> enum: [ 5000, 5625, 6250, 6875, 7500, 8125, 8750, 9375, 10000,
>>>> 10625, 11250, 11875, 12500 13125, 13750, 14375, 15000 ]
>>>>
>>>> ?
>>> I'm okay with that approach if there's no better one. I would need to
>>> remove the register raw values tables from the driver and use a switch
>>> statement to map those values to raw values.
>> You can also use -bp or -percent:
>> https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/property-units.yaml
>
> ti,cfg-dac-minus-percent:
> description: |
> DP83826 PHY only.
> Sets the voltage ratio of the logical level -1 relative to the
> nominal level for the MLT-3 encoded TX data.
> enum: [50, 56, 62, 68, 75, 81, 87, 93, 100, 106, 112, 118, 125,
> 131, 137, 143, 150]
> default: 100

Yes, which would also solve your problem of binding errors. But does not
remove the need of testing it before sending to the lists.

Best regards,
Krzysztof