[PATCH v6 00/36] tracing: fprobe: function_graph: Multi-function graph and fprobe on fgraph

From: Masami Hiramatsu (Google)
Date: Fri Jan 12 2024 - 05:11:37 EST


Hi,

Here is the 6th version of the series to re-implement the fprobe on
function-graph tracer. The previous version is;

https://lore.kernel.org/all/170290509018.220107.1347127510564358608.stgit@devnote2/

This version fixes use-after-unregister bug and arm64 stack unwinding
bug [13/36], add an improvement for multiple interrupts during push
operation[20/36], keep SAVE_REGS until BPF and fprobe_event using
ftrace_regs[26/36], also reorder the patches[30/36][31/36] so that new
fprobe can switch to SAVE_ARGS[32/36] safely.
This series also temporarily adds a DIRECT_CALLS bugfix[1/36], which
should be pushed separatedly as a stable bugfix.

There are some TODOs:
- Add s390x and loongarch support to fprobe (multiple fgraph).
- Fix to get the symbol address from ftrace entry address on arm64.
(This should be done in BPF trace event)
- Cleanup code, rename some terms(offset/index) and FGRAPH_TYPE_BITMAP
part should be merged to FGRAPH_TYPE_ARRAY patch.


Overview
--------
This series does major 2 changes, enable multiple function-graphs on
the ftrace (e.g. allow function-graph on sub instances) and rewrite the
fprobe on this function-graph.

The former changes had been sent from Steven Rostedt 4 years ago (*),
which allows users to set different setting function-graph tracer (and
other tracers based on function-graph) in each trace-instances at the
same time.

(*) https://lore.kernel.org/all/20190525031633.811342628@xxxxxxxxxxx/

The purpose of latter change are;

1) Remove dependency of the rethook from fprobe so that we can reduce
the return hook code and shadow stack.

2) Make 'ftrace_regs' the common trace interface for the function
boundary.

1) Currently we have 2(or 3) different function return hook codes,
the function-graph tracer and rethook (and legacy kretprobe).
But since this is redundant and needs double maintenance cost,
I would like to unify those. From the user's viewpoint, function-
graph tracer is very useful to grasp the execution path. For this
purpose, it is hard to use the rethook in the function-graph
tracer, but the opposite is possible. (Strictly speaking, kretprobe
can not use it because it requires 'pt_regs' for historical reasons.)

2) Now the fprobe provides the 'pt_regs' for its handler, but that is
wrong for the function entry and exit. Moreover, depending on the
architecture, there is no way to accurately reproduce 'pt_regs'
outside of interrupt or exception handlers. This means fprobe should
not use 'pt_regs' because it does not use such exceptions.
(Conversely, kprobe should use 'pt_regs' because it is an abstract
interface of the software breakpoint exception.)

This series changes fprobe to use function-graph tracer for tracing
function entry and exit, instead of mixture of ftrace and rethook.
Unlike the rethook which is a per-task list of system-wide allocated
nodes, the function graph's ret_stack is a per-task shadow stack.
Thus it does not need to set 'nr_maxactive' (which is the number of
pre-allocated nodes).
Also the handlers will get the 'ftrace_regs' instead of 'pt_regs'.
Since eBPF mulit_kprobe/multi_kretprobe events still use 'pt_regs' as
their register interface, this changes it to convert 'ftrace_regs' to
'pt_regs'. Of course this conversion makes an incomplete 'pt_regs',
so users must access only registers for function parameters or
return value.

Design
------
Instead of using ftrace's function entry hook directly, the new fprobe
is built on top of the function-graph's entry and return callbacks
with 'ftrace_regs'.

Since the fprobe requires access to 'ftrace_regs', the architecture
must support CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS, which enables to
call function-graph entry callback with 'ftrace_regs', and also
CONFIG_HAVE_FUNCTION_GRAPH_FREGS, which passes the ftrace_regs to
return_to_handler.

All fprobes share a single function-graph ops (means shares a common
ftrace filter) similar to the kprobe-on-ftrace. This needs another
layer to find corresponding fprobe in the common function-graph
callbacks, but has much better scalability, since the number of
registered function-graph ops is limited.

In the entry callback, the fprobe runs its entry_handler and saves the
address of 'fprobe' on the function-graph's shadow stack as data. The
return callback decodes the data to get the 'fprobe' address, and runs
the exit_handler.

The fprobe introduces two hash-tables, one is for entry callback which
searches fprobes related to the given function address passed by entry
callback. The other is for a return callback which checks if the given
'fprobe' data structure pointer is still valid. Note that it is
possible to unregister fprobe before the return callback runs. Thus
the address validation must be done before using it in the return
callback.

This series can be applied against the v6.7 kernel.

This series can also be found below branch.

https://git.kernel.org/pub/scm/linux/kernel/git/mhiramat/linux.git/log/?h=topic/fprobe-on-fgraph

Thank you,

---

Masami Hiramatsu (Google) (21):
ftrace: Fix DIRECT_CALLS to use SAVE_REGS by default
tracing: Add a comment about ftrace_regs definition
tracing: Rename ftrace_regs_return_value to ftrace_regs_get_return_value
x86: tracing: Add ftrace_regs definition in the header
function_graph: Use a simple LRU for fgraph_array index number
function_graph: Improve push operation for several interrupts
function_graph: Add a new entry handler with parent_ip and ftrace_regs
function_graph: Add a new exit handler with parent_ip and ftrace_regs
x86/ftrace: Enable HAVE_FUNCTION_GRAPH_FREGS
arm64: ftrace: Enable HAVE_FUNCTION_GRAPH_FREGS
fprobe: Use ftrace_regs in fprobe entry handler
fprobe: Use ftrace_regs in fprobe exit handler
tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs
tracing: Add ftrace_fill_perf_regs() for perf event
tracing/fprobe: Enable fprobe events with CONFIG_DYNAMIC_FTRACE_WITH_ARGS
bpf: Enable kprobe_multi feature if CONFIG_FPROBE is enabled
fprobe: Rewrite fprobe on function-graph tracer
tracing/fprobe: Remove nr_maxactive from fprobe
selftests: ftrace: Remove obsolate maxactive syntax check
selftests/ftrace: Add a test case for repeating register/unregister fprobe
Documentation: probes: Update fprobe on function-graph tracer

Steven Rostedt (VMware) (15):
function_graph: Convert ret_stack to a series of longs
fgraph: Use BUILD_BUG_ON() to make sure we have structures divisible by long
function_graph: Add an array structure that will allow multiple callbacks
function_graph: Allow multiple users to attach to function graph
function_graph: Remove logic around ftrace_graph_entry and return
ftrace/function_graph: Pass fgraph_ops to function graph callbacks
ftrace: Allow function_graph tracer to be enabled in instances
ftrace: Allow ftrace startup flags exist without dynamic ftrace
function_graph: Have the instances use their own ftrace_ops for filtering
function_graph: Add "task variables" per task for fgraph_ops
function_graph: Move set_graph_function tests to shadow stack global var
function_graph: Move graph depth stored data to shadow stack global var
function_graph: Move graph notrace bit to shadow stack global var
function_graph: Implement fgraph_reserve_data() and fgraph_retrieve_data()
function_graph: Add selftest for passing local variables


Documentation/trace/fprobe.rst | 42 +
arch/arm64/Kconfig | 2
arch/arm64/include/asm/ftrace.h | 24
arch/arm64/kernel/entry-ftrace.S | 28 +
arch/arm64/kernel/ftrace.c | 21
arch/loongarch/Kconfig | 1
arch/loongarch/include/asm/ftrace.h | 2
arch/loongarch/kernel/ftrace_dyn.c | 6
arch/powerpc/include/asm/ftrace.h | 9
arch/powerpc/kernel/trace/ftrace.c | 2
arch/powerpc/kernel/trace/ftrace_64_pg.c | 10
arch/s390/Kconfig | 1
arch/s390/include/asm/ftrace.h | 7
arch/x86/Kconfig | 4
arch/x86/include/asm/ftrace.h | 17
arch/x86/kernel/ftrace.c | 51 +
arch/x86/kernel/ftrace_64.S | 37 +
include/linux/fprobe.h | 58 +
include/linux/ftrace.h | 167 +++
include/linux/sched.h | 3
include/linux/trace_recursion.h | 39 -
kernel/trace/Kconfig | 19
kernel/trace/bpf_trace.c | 14
kernel/trace/fgraph.c | 1067 ++++++++++++++++----
kernel/trace/fprobe.c | 631 ++++++++----
kernel/trace/ftrace.c | 23
kernel/trace/ftrace_internal.h | 2
kernel/trace/trace.h | 94 +-
kernel/trace/trace_fprobe.c | 114 +-
kernel/trace/trace_functions.c | 8
kernel/trace/trace_functions_graph.c | 96 +-
kernel/trace/trace_irqsoff.c | 10
kernel/trace/trace_probe_tmpl.h | 2
kernel/trace/trace_sched_wakeup.c | 10
kernel/trace/trace_selftest.c | 178 +++
lib/test_fprobe.c | 51 -
samples/fprobe/fprobe_example.c | 4
.../test.d/dynevent/add_remove_fprobe_repeat.tc | 19
.../ftrace/test.d/dynevent/fprobe_syntax_errors.tc | 4
39 files changed, 2177 insertions(+), 700 deletions(-)
create mode 100644 tools/testing/selftests/ftrace/test.d/dynevent/add_remove_fprobe_repeat.tc

--
Masami Hiramatsu (Google) <mhiramat@xxxxxxxxxx>