[PATCH v4 4/4] arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition

From: Bryan O'Donoghue
Date: Thu Jan 11 2024 - 12:17:23 EST


Add CAMSS block definition for sc8280xp.

This drop contains definitions for the following components on sc8280xp:

VFE * 4
VFE Lite * 4
CSID * 4
CSIPHY * 4

This dtsi definition has been developed and validated on a Lenovo X13s
laptop.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 235 +++++++++++++++++++++++++++++++++
1 file changed, 235 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 1949b4fa04e9..363a89e403bd 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -3614,6 +3614,241 @@ cci3_i2c1: i2c-bus@1 {
};
};

+ camss: camss@ac5a000 {
+ compatible = "qcom,sc8280xp-camss";
+
+ reg = <0 0x0ac5a000 0 0x2000>,
+ <0 0x0ac5c000 0 0x2000>,
+ <0 0x0ac65000 0 0x2000>,
+ <0 0x0ac67000 0 0x2000>,
+ <0 0x0acaf000 0 0x4000>,
+ <0 0x0acb3000 0 0x1000>,
+ <0 0x0acb6000 0 0x4000>,
+ <0 0x0acba000 0 0x1000>,
+ <0 0x0acbd000 0 0x4000>,
+ <0 0x0acc1000 0 0x1000>,
+ <0 0x0acc4000 0 0x4000>,
+ <0 0x0acc8000 0 0x1000>,
+ <0 0x0accb000 0 0x4000>,
+ <0 0x0accf000 0 0x1000>,
+ <0 0x0acd2000 0 0x4000>,
+ <0 0x0acd6000 0 0x1000>,
+ <0 0x0acd9000 0 0x4000>,
+ <0 0x0acdd000 0 0x1000>,
+ <0 0x0ace0000 0 0x4000>,
+ <0 0x0ace4000 0 0x1000>;
+ reg-names = "csiphy2",
+ "csiphy3",
+ "csiphy0",
+ "csiphy1",
+ "vfe0",
+ "csid0",
+ "vfe1",
+ "csid1",
+ "vfe2",
+ "csid2",
+ "vfe_lite0",
+ "csid0_lite",
+ "vfe_lite1",
+ "csid1_lite",
+ "vfe_lite2",
+ "csid2_lite",
+ "vfe_lite3",
+ "csid3_lite",
+ "vfe3",
+ "csid3";
+
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "csid1_lite",
+ "vfe_lite1",
+ "csiphy3",
+ "csid0",
+ "vfe0",
+ "csid1",
+ "vfe1",
+ "csid0_lite",
+ "vfe_lite0",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid2",
+ "vfe2",
+ "csid3_lite",
+ "csid2_lite",
+ "vfe_lite3",
+ "vfe_lite2",
+ "csid3",
+ "vfe3";
+
+ power-domains = <&camcc IFE_0_GDSC>,
+ <&camcc IFE_1_GDSC>,
+ <&camcc IFE_2_GDSC>,
+ <&camcc IFE_3_GDSC>,
+ <&camcc TITAN_TOP_GDSC>;
+ power-domain-names = "ife0",
+ "ife1",
+ "ife2",
+ "ife3",
+ "top";
+
+ clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CSIPHY0_CLK>,
+ <&camcc CAMCC_CSI0PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY1_CLK>,
+ <&camcc CAMCC_CSI1PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY2_CLK>,
+ <&camcc CAMCC_CSI2PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY3_CLK>,
+ <&camcc CAMCC_CSI3PHYTIMER_CLK>,
+ <&camcc CAMCC_IFE_0_AXI_CLK>,
+ <&camcc CAMCC_IFE_0_CLK>,
+ <&camcc CAMCC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_0_CSID_CLK>,
+ <&camcc CAMCC_IFE_1_AXI_CLK>,
+ <&camcc CAMCC_IFE_1_CLK>,
+ <&camcc CAMCC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_1_CSID_CLK>,
+ <&camcc CAMCC_IFE_2_AXI_CLK>,
+ <&camcc CAMCC_IFE_2_CLK>,
+ <&camcc CAMCC_IFE_2_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_2_CSID_CLK>,
+ <&camcc CAMCC_IFE_3_AXI_CLK>,
+ <&camcc CAMCC_IFE_3_CLK>,
+ <&camcc CAMCC_IFE_3_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_3_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_0_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_1_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_2_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_3_CSID_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe0_csid",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe1_csid",
+ "vfe2_axi",
+ "vfe2",
+ "vfe2_cphy_rx",
+ "vfe2_csid",
+ "vfe3_axi",
+ "vfe3",
+ "vfe3_cphy_rx",
+ "vfe3_csid",
+ "vfe_lite0",
+ "vfe_lite0_cphy_rx",
+ "vfe_lite0_csid",
+ "vfe_lite1",
+ "vfe_lite1_cphy_rx",
+ "vfe_lite1_csid",
+ "vfe_lite2",
+ "vfe_lite2_cphy_rx",
+ "vfe_lite2_csid",
+ "vfe_lite3",
+ "vfe_lite3_cphy_rx",
+ "vfe_lite3_csid",
+ "gcc_axi_hf",
+ "gcc_axi_sf";
+
+ iommus = <&apps_smmu 0x2000 0x4e0>,
+ <&apps_smmu 0x2020 0x4e0>,
+ <&apps_smmu 0x2040 0x4e0>,
+ <&apps_smmu 0x2060 0x4e0>,
+ <&apps_smmu 0x2080 0x4e0>,
+ <&apps_smmu 0x20e0 0x4e0>,
+ <&apps_smmu 0x20c0 0x4e0>,
+ <&apps_smmu 0x20a0 0x4e0>,
+ <&apps_smmu 0x2400 0x4e0>,
+ <&apps_smmu 0x2420 0x4e0>,
+ <&apps_smmu 0x2440 0x4e0>,
+ <&apps_smmu 0x2460 0x4e0>,
+ <&apps_smmu 0x2480 0x4e0>,
+ <&apps_smmu 0x24e0 0x4e0>,
+ <&apps_smmu 0x24c0 0x4e0>,
+ <&apps_smmu 0x24a0 0x4e0>;
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
+ <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "cam_ahb",
+ "cam_hf_mnoc",
+ "cam_sf_mnoc",
+ "cam_sf_icp_mnoc";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ port@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+
camcc: clock-controller@ad00000 {
compatible = "qcom,sc8280xp-camcc";
reg = <0 0x0ad00000 0 0x20000>;

--
2.42.0