[v3 03/10] drivers/perf: riscv: Read upper bits of a firmware counter

From: Atish Patra
Date: Wed Jan 10 2024 - 18:15:55 EST


SBI v2.0 introduced a explicit function to read the upper 32 bits
for any firmwar counter width that is longer than 32bits.
This is only applicable for RV32 where firmware counter can be
64 bit.

Acked-by: Palmer Dabbelt <palmer@xxxxxxxxxxxx>
Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Reviewed-by: Anup Patel <anup@xxxxxxxxxxxxxx>
Signed-off-by: Atish Patra <atishp@xxxxxxxxxxxx>
---
drivers/perf/riscv_pmu_sbi.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index 16acd4dcdb96..ea0fdb589f0d 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -35,6 +35,8 @@
PMU_FORMAT_ATTR(event, "config:0-47");
PMU_FORMAT_ATTR(firmware, "config:63");

+static bool sbi_v2_available;
+
static struct attribute *riscv_arch_formats_attr[] = {
&format_attr_event.attr,
&format_attr_firmware.attr,
@@ -488,16 +490,23 @@ static u64 pmu_sbi_ctr_read(struct perf_event *event)
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
struct sbiret ret;
- union sbi_pmu_ctr_info info;
u64 val = 0;
+ union sbi_pmu_ctr_info info = pmu_ctr_list[idx];

if (pmu_sbi_is_fw_event(event)) {
ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ,
hwc->idx, 0, 0, 0, 0, 0);
- if (!ret.error)
- val = ret.value;
+ if (ret.error)
+ return 0;
+
+ val = ret.value;
+ if (IS_ENABLED(CONFIG_32BIT) && sbi_v2_available && info.width >= 32) {
+ ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_FW_READ_HI,
+ hwc->idx, 0, 0, 0, 0, 0);
+ if (!ret.error)
+ val |= ((u64)ret.value << 32);
+ }
} else {
- info = pmu_ctr_list[idx];
val = riscv_pmu_ctr_read_csr(info.csr);
if (IS_ENABLED(CONFIG_32BIT))
val = ((u64)riscv_pmu_ctr_read_csr(info.csr + 0x80)) << 31 | val;
@@ -1108,6 +1117,9 @@ static int __init pmu_sbi_devinit(void)
return 0;
}

+ if (sbi_spec_version >= sbi_mk_version(2, 0))
+ sbi_v2_available = true;
+
ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_RISCV_STARTING,
"perf/riscv/pmu:starting",
pmu_sbi_starting_cpu, pmu_sbi_dying_cpu);
--
2.34.1