Re: [PATCH v2 0/3] riscv: dts: starfive: add Milkv Mars board device tree

From: Conor Dooley
Date: Wed Jan 10 2024 - 08:53:28 EST


On Sat, Dec 02, 2023 at 02:07:50PM -0800, Emil Renner Berthing wrote:
> Jisheng Zhang wrote:
> > The Milkv Mars is a development board based on the Starfive JH7110 SoC.
> > The board features:
> >
> > - JH7110 SoC
> > - 1/2/4/8 GiB LPDDR4 DRAM
> > - AXP15060 PMIC
> > - 40 pin GPIO header
> > - 3x USB 3.0 host port
> > - 1x USB 2.0 host port
> > - 1x M.2 E-Key
> > - 1x eMMC slot
> > - 1x MicroSD slot
> > - 1x QSPI Flash
> > - 1x 1Gbps Ethernet port
> > - 1x HDMI port
> > - 1x 2-lane DSI and 1x 4-lane DSI
> > - 1x 2-lane CSI
> >
> > patch1 adds 'cpus' label
> > patch2 adds "milkv,mars" board dt-binding
> > patch3 adds the devicetree file describing the currently supported
> > features:
> > Namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet.
> >
> > Since v1:
> > - add two new patches which add "cpus" label and board dt-binding
> > - adopt Krzysztof's suggestions, thanks
> >
> > Hi Conor,
> >
> > I see you have sent a patch which moves the timebase-frequency property
> > to soc dtsi, but this series doesn't rebase on that. I can update it
> > once your patch is merged.
>
> Hi Jisheng,
>
> Thanks for working on this! On the JH7110 the mtime derives almost directly
> from the external oscillator like this:
>
> osc (24MHz) -> rtc_toggle (div 6) -> mtime (4MHz)
>
> So to me it makes sense to define the timebase-frequency in the same file as
> the frequency of the external oscillator.
>
> In general it looks good, but if you do
>
> diff -Naur jh7110-{starfive-visionfive-2.dtsi,milkv-mars.dts}
>
> you'll see that those two files are almost identical. Even external clock
> speeds and all the pin configuration are the same. I'd strongly prefer to have
> all that factored out in a common .dtsi so fixes don't get out of sync.

I'm gonna mark this as changes requested on patchwork because of this
comment. LMK if you don't think this is worth another version Emil.

Cheers,
Conor.

Attachment: signature.asc
Description: PGP signature