[PATCH v6 4/5] ARM: dts: stm32: add display support on stm32f769-disco

From: Dario Binacchi
Date: Wed Jan 10 2024 - 03:08:45 EST


The patch adds display support on the stm32f769-disco board.

Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
---

(no changes since v1)

arch/arm/boot/dts/st/stm32f769-disco.dts | 72 +++++++++++++++++++++++-
1 file changed, 71 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/st/stm32f769-disco.dts b/arch/arm/boot/dts/st/stm32f769-disco.dts
index 8632bd866272..d1eb5f9c78bf 100644
--- a/arch/arm/boot/dts/st/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/st/stm32f769-disco.dts
@@ -41,7 +41,7 @@
*/

/dts-v1/;
-#include "stm32f746.dtsi"
+#include "stm32f769.dtsi"
#include "stm32f769-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
@@ -60,6 +60,19 @@ memory@c0000000 {
reg = <0xC0000000 0x1000000>;
};

+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ linux,dma {
+ compatible = "shared-dma-pool";
+ linux,dma-default;
+ no-map;
+ size = <0x100000>;
+ };
+ };
+
aliases {
serial0 = &usart1;
};
@@ -85,6 +98,13 @@ button-0 {
};
};

+ panel_backlight: panel-backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpioi 14 GPIO_ACTIVE_HIGH>;
+ default-on;
+ status = "okay";
+ };
+
usbotg_hs_phy: usb-phy {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
@@ -114,6 +134,46 @@ &clk_hse {
clock-frequency = <25000000>;
};

+&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&ltdc_out_dsi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&dsi_panel_in>;
+ };
+ };
+ };
+
+ panel0: panel-dsi@0 {
+ compatible = "orisetech,otm8009a";
+ reg = <0>; /* dsi virtual channel (0..3) */
+ reset-gpios = <&gpioj 15 GPIO_ACTIVE_LOW>;
+ power-supply = <&vcc_3v3>;
+ backlight = <&panel_backlight>;
+ status = "okay";
+
+ port {
+ dsi_panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
+
&i2c1 {
pinctrl-0 = <&i2c1_pins_b>;
pinctrl-names = "default";
@@ -122,6 +182,16 @@ &i2c1 {
status = "okay";
};

+&ltdc {
+ status = "okay";
+
+ port {
+ ltdc_out_dsi: endpoint@0 {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+};
+
&rtc {
status = "okay";
};
--
2.43.0