Re: [PATCH v5 2/2] documentation: Document PR_RISCV_SET_ICACHE_FLUSH_CTX prctl

[Charlie Jenkins]

On Mon, Jan 08, 2024 at 05:24:47PM -0800, Atish Patra wrote:
> On Mon, Jan 8, 2024 at 10:42 AM Charlie Jenkins <charlie@xxxxxxxxxxxx> wrote:
> >
> > Provide documentation that explains how to properly do CMODX in riscv.
> >
> > Signed-off-by: Charlie Jenkins <charlie@xxxxxxxxxxxx>
> > ---
> >  Documentation/arch/riscv/cmodx.rst | 88 ++++++++++++++++++++++++++++++++++++++
> >  Documentation/arch/riscv/index.rst |  1 +
> >  2 files changed, 89 insertions(+)
> >
> > diff --git a/Documentation/arch/riscv/cmodx.rst b/Documentation/arch/riscv/cmodx.rst
> > new file mode 100644
> > index 000000000000..afd7086c222c
> > --- /dev/null
> > +++ b/Documentation/arch/riscv/cmodx.rst
> > @@ -0,0 +1,88 @@
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +==============================================================================
> > +Concurrent Modification and Execution of Instructions (CMODX) for RISC-V Linux
> > +==============================================================================
> > +
> > +CMODX is a programming technique where a program executes instructions that were
> > +modified by the program itself. Instruction storage and the instruction cache
> > +(icache) are not guaranteed to be synchronized on RISC-V hardware. Therefore, the
> > +program must enforce its own synchronization with the unprivileged fence.i
> > +instruction.
> > +
> > +However, the default Linux ABI prohibits the use of fence.i in userspace
> > +applications. At any point the scheduler may migrate a task onto a new hart. If
> > +migration occurs after the userspace synchronized the icache and instruction
> > +storage with fence.i, the icache will no longer be clean. This is due to the
> > +behavior of fence.i only affecting the hart that it is called on. Thus, the hart
> > +that the task has been migrated to may not have synchronized instruction storage
> > +and icache.
> > +
> > +There are two ways to solve this problem: use the riscv_flush_icache() syscall,
> > +or use the ``PR_RISCV_SET_ICACHE_FLUSH_CTX`` prctl() and emit fence.i in
> > +userspace. The syscall performs a one-off icache flushing operation. The prctl
> > +changes the Linux ABI to allow userspace to emit icache flushing operations.
> > +
> > +prctl() Interface
> > +---------------------
> > +
> > +Call prctl() with ``PR_RISCV_SET_ICACHE_FLUSH_CTX`` as the first argument. The
> > +remaining arguments will be delegated to the riscv_set_icache_flush_ctx
> > +function detailed below.
> > +
> > +.. kernel-doc:: arch/riscv/mm/cacheflush.c
> > +       :identifiers: riscv_set_icache_flush_ctx
> > +
> 
> Document the arguments of the prctl as well ?

Do you mean to include the ``PR_RISCV_SET_ICACHE_FLUSH_CTX`` key in the
comment of riscv_set_icache_flush_ctx? The args to
riscv_set_icache_flush_ctx are the args to the prctl except for the key.

- Charlie

> 
> > +Example usage:
> > +
> > +The following files are meant to be compiled and linked with each other. The
> > +modify_instruction() function replaces an add with 0 with an add with one,
> > +causing the instruction sequence in get_value() to change from returning a zero
> > +to returning a one.
> > +
> > +cmodx.c::
> > +
> > +       #include <stdio.h>
> > +       #include <sys/prctl.h>
> > +
> > +       extern int get_value();
> > +       extern void modify_instruction();
> > +
> > +       int main()
> > +       {
> > +               int value = get_value();
> > +               printf("Value before cmodx: %d\n", value);
> > +
> > +               // Call prctl before first fence.i is called inside modify_instruction
> > +               prctl(PR_RISCV_SET_ICACHE_FLUSH_CTX_ON, PR_RISCV_CTX_SW_FENCEI, 0);
> > +               modify_instruction();
> > +
> > +               value = get_value();
> > +               printf("Value after cmodx: %d\n", value);
> > +               return 0;
> > +       }
> > +
> > +cmodx.S::
> > +
> > +       .option norvc
> > +
> > +       .text
> > +       .global modify_instruction
> > +       modify_instruction:
> > +       lw a0, new_insn
> > +       lui a5,%hi(old_insn)
> > +       sw  a0,%lo(old_insn)(a5)
> > +       fence.i
> > +       ret
> > +
> > +       .section modifiable, "awx"
> > +       .global get_value
> > +       get_value:
> > +       li a0, 0
> > +       old_insn:
> > +       addi a0, a0, 0
> > +       ret
> > +
> > +       .data
> > +       new_insn:
> > +       addi a0, a0, 1
> > diff --git a/Documentation/arch/riscv/index.rst b/Documentation/arch/riscv/index.rst
> > index 4dab0cb4b900..eecf347ce849 100644
> > --- a/Documentation/arch/riscv/index.rst
> > +++ b/Documentation/arch/riscv/index.rst
> > @@ -13,6 +13,7 @@ RISC-V architecture
> >      patch-acceptance
> >      uabi
> >      vector
> > +    cmodx
> >
> >      features
> >
> >
> > --
> > 2.43.0
> >
> 
> 
> --
> Regards,
> Atish