Re: [PATCH v3 10/10] counter: stm32-timer-cnt: add support for capture events

[William Breathitt Gray]

On Wed, Dec 20, 2023 at 03:57:26PM +0100, Fabrice Gasnier wrote:
> +	/*
> +	 * configure channel in input capture mode, map channel 1 on TI1, channel2 on TI2...
> +	 * Select both edges / non-inverted to trigger a capture.
> +	 */

I suggest defining a new local variable 'cc' to point to stm32_cc[ch]. I
think that's make the code look nicer here to avoid all the array index
syntax every time you access stm32_cc[ch].

> +	if (enable) {
> +		/* first clear possibly latched capture flag upon enabling */
> +		regmap_read(priv->regmap, TIM_CCER, &ccer);
> +		if (!(ccer & stm32_cc[ch].ccer_bits)) {

Try regmap_test_bits() here instead of using regmap_read().

> +			sr = ~TIM_SR_CC_IF(ch);
> +			regmap_write(priv->regmap, TIM_SR, sr);

Eliminate 'sr' by regmap_write(priv->regmap, TIM_SR, ~TIM_SR_CC_IF(ch)).

> @@ -366,6 +460,12 @@ static int stm32_count_events_configure(struct counter_device *counter)
>  				regmap_write(priv->regmap, TIM_SR, (u32)~TIM_SR_UIF);
>  			dier |= TIM_DIER_UIE;
>  			break;
> +		case COUNTER_EVENT_CAPTURE:
> +			ret = stm32_count_capture_configure(counter, event_node->channel, true);
> +			if (ret)
> +				return ret;
> +			dier |= TIM_DIER_CC_IE(event_node->channel);

Ah, now I understand why the previous patch OR'd TIM_DIER_UIE to dier.
Apologies for the noise.

> @@ -374,6 +474,15 @@ static int stm32_count_events_configure(struct counter_device *counter)
>  
>  	regmap_write(priv->regmap, TIM_DIER, dier);
>  
> +	/* check for disabled capture events */
> +	for (i = 0 ; i < priv->nchannels; i++) {
> +		if (!(dier & TIM_DIER_CC_IE(i))) {
> +			ret = stm32_count_capture_configure(counter, i, false);
> +			if (ret)
> +				return ret;
> +		}

Would for_each_clear_bitrange() in linux/find.h work for this loop?

> @@ -504,7 +620,7 @@ static irqreturn_t stm32_timer_cnt_isr(int irq, void *ptr)
>  	 * Some status bits in SR don't match with the enable bits in DIER. Only take care of
>  	 * the possibly enabled bits in DIER (that matches in between SR and DIER).
>  	 */
> -	dier &= TIM_DIER_UIE;
> +	dier &= (TIM_DIER_UIE | TIM_DIER_CC1IE | TIM_DIER_CC2IE | TIM_DIER_CC3IE | TIM_DIER_CC4IE);

Again, sorry for the noise on the previous patch; this makes sense now.

> @@ -515,6 +631,15 @@ static irqreturn_t stm32_timer_cnt_isr(int irq, void *ptr)
>  		clr &= ~TIM_SR_UIF;
>  	}
>  
> +	/* Check capture events */
> +	for (i = 0 ; i < priv->nchannels; i++) {
> +		if (sr & TIM_SR_CC_IF(i)) {

Would for_each_set_bitrange() in linux/find.h work for this loop?

> +			counter_push_event(counter, COUNTER_EVENT_CAPTURE, i);
> +			clr &= ~TIM_SR_CC_IF(i);

Perhaps u32p_replace_bits(&clr, 0, TIM_SR_CC_IF(i)) is clearer here.

> @@ -627,8 +752,11 @@ static int stm32_timer_cnt_probe(struct platform_device *pdev)
>  		}
>  	} else {
>  		for (i = 0; i < priv->nr_irqs; i++) {
> -			/* Only take care of update IRQ for overflow events */
> -			if (i != STM32_TIMERS_IRQ_UP)
> +			/*
> +			 * Only take care of update IRQ for overflow events, and cc for
> +			 * capture events.
> +			 */
> +			if (i != STM32_TIMERS_IRQ_UP && i != STM32_TIMERS_IRQ_CC)
>  				continue;

Okay, I see now why you have this check. This should be fine as it'll
makes adding support in the future for the other IRQs a less invasive
change.

William Breathitt Gray

Attachment: signature.asc
Description: PGP signature