[PATCH v3 06/12] usb: typec: tcpm: add control message support to sop'

From: RD Babiera
Date: Mon Jan 08 2024 - 14:18:24 EST


Add tx_sop_type to tcpm_pd_send_control and rx_sop_type to
tcpm_pd_ctrl_request. TCPC_TX_SOP is added to all pd_send_control calls,
but TCPC_TX_SOP_PRIME is added to pd_send_control for a SOFT_RESET message
sent after a Vconn swap that makes the Port the Vconn source. Likewise,
tcpm_pd_ctrl_request resets the proper protocol layer depending on
rx_sop_type for SOFT_RESET.

VCONN_SWAP_TURN_ON_VCONN now moves to a new state,
VCONN_SWAP_SEND_SOFT_RESET. This state sends SOFT_RESET over SOP' before
transitioning to the ready state if applicable. It transitions after
PD_T_VCONN_STABLE, definied in pd.h as the time required for Vconn to be
on before transmitting messages.

Signed-off-by: RD Babiera <rdbabiera@xxxxxxxxxx>
Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
Changes since v2:
* Added reviewed-by tag
---
drivers/usb/typec/tcpm/tcpm.c | 159 ++++++++++++++++++++++++----------
include/linux/usb/pd.h | 1 +
2 files changed, 115 insertions(+), 45 deletions(-)

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index d2ca85c8fec6..a59927925714 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -108,6 +108,7 @@
S(VCONN_SWAP_WAIT_FOR_VCONN), \
S(VCONN_SWAP_TURN_ON_VCONN), \
S(VCONN_SWAP_TURN_OFF_VCONN), \
+ S(VCONN_SWAP_SEND_SOFT_RESET), \
\
S(FR_SWAP_SEND), \
S(FR_SWAP_SEND_TIMEOUT), \
@@ -2395,7 +2396,8 @@ static inline enum tcpm_state ready_state(struct tcpm_port *port)
}

static int tcpm_pd_send_control(struct tcpm_port *port,
- enum pd_ctrl_msg_type type);
+ enum pd_ctrl_msg_type type,
+ enum tcpm_transmit_type tx_sop_type);

static void tcpm_handle_alert(struct tcpm_port *port, const __le32 *payload,
int cnt)
@@ -2749,10 +2751,12 @@ static void tcpm_pps_complete(struct tcpm_port *port, int result)
}

static void tcpm_pd_ctrl_request(struct tcpm_port *port,
- const struct pd_message *msg)
+ const struct pd_message *msg,
+ enum tcpm_transmit_type rx_sop_type)
{
enum pd_ctrl_msg_type type = pd_header_type_le(msg->header);
enum tcpm_state next_state;
+ unsigned int rev = pd_header_rev_le(msg->header);

/*
* Stop VDM state machine if interrupted by other Messages while NOT_SUPP is allowed in
@@ -2917,6 +2921,16 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
case SOFT_RESET_SEND:
if (port->ams == SOFT_RESET_AMS)
tcpm_ams_finish(port);
+ /*
+ * SOP' Soft Reset is done after Vconn Swap,
+ * which returns to ready state
+ */
+ if (rx_sop_type == TCPC_TX_SOP_PRIME) {
+ if (rev < port->negotiated_rev_prime)
+ port->negotiated_rev_prime = rev;
+ tcpm_set_state(port, ready_state(port), 0);
+ break;
+ }
if (port->pwr_role == TYPEC_SOURCE) {
port->upcoming_state = SRC_SEND_CAPABILITIES;
tcpm_ams_start(port, POWER_NEGOTIATION);
@@ -3116,8 +3130,7 @@ static void tcpm_pd_rx_handler(struct kthread_work *work)
if (msgid == port->rx_msgid_prime)
goto done;
port->rx_msgid_prime = msgid;
- /* Ignore SOP' for now */
- goto done;
+ break;
case TCPC_TX_SOP:
default:
if (msgid == port->rx_msgid && type != PD_CTRL_SOFT_RESET)
@@ -3141,7 +3154,7 @@ static void tcpm_pd_rx_handler(struct kthread_work *work)
else if (cnt)
tcpm_pd_data_request(port, msg);
else
- tcpm_pd_ctrl_request(port, msg);
+ tcpm_pd_ctrl_request(port, msg, rx_sop_type);
}
}

@@ -3168,17 +3181,40 @@ void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg,
EXPORT_SYMBOL_GPL(tcpm_pd_receive);

static int tcpm_pd_send_control(struct tcpm_port *port,
- enum pd_ctrl_msg_type type)
+ enum pd_ctrl_msg_type type,
+ enum tcpm_transmit_type tx_sop_type)
{
struct pd_message msg;

memset(&msg, 0, sizeof(msg));
- msg.header = PD_HEADER_LE(type, port->pwr_role,
- port->data_role,
- port->negotiated_rev,
- port->message_id, 0);
+ switch (tx_sop_type) {
+ case TCPC_TX_SOP_PRIME:
+ msg.header = PD_HEADER_LE(type,
+ 0, /* Cable Plug Indicator for DFP/UFP */
+ 0, /* Reserved */
+ port->negotiated_rev,
+ port->message_id_prime,
+ 0);
+ break;
+ case TCPC_TX_SOP:
+ msg.header = PD_HEADER_LE(type,
+ port->pwr_role,
+ port->data_role,
+ port->negotiated_rev,
+ port->message_id,
+ 0);
+ break;
+ default:
+ msg.header = PD_HEADER_LE(type,
+ port->pwr_role,
+ port->data_role,
+ port->negotiated_rev,
+ port->message_id,
+ 0);
+ break;
+ }

- return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg);
+ return tcpm_pd_transmit(port, tx_sop_type, &msg);
}

/*
@@ -3197,13 +3233,13 @@ static bool tcpm_send_queued_message(struct tcpm_port *port)

switch (queued_message) {
case PD_MSG_CTRL_WAIT:
- tcpm_pd_send_control(port, PD_CTRL_WAIT);
+ tcpm_pd_send_control(port, PD_CTRL_WAIT, TCPC_TX_SOP);
break;
case PD_MSG_CTRL_REJECT:
- tcpm_pd_send_control(port, PD_CTRL_REJECT);
+ tcpm_pd_send_control(port, PD_CTRL_REJECT, TCPC_TX_SOP);
break;
case PD_MSG_CTRL_NOT_SUPP:
- tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP);
+ tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP, TCPC_TX_SOP);
break;
case PD_MSG_DATA_SINK_CAP:
ret = tcpm_pd_send_sink_caps(port);
@@ -4218,7 +4254,7 @@ static void run_state_machine(struct tcpm_port *port)
case SRC_NEGOTIATE_CAPABILITIES:
ret = tcpm_pd_check_request(port);
if (ret < 0) {
- tcpm_pd_send_control(port, PD_CTRL_REJECT);
+ tcpm_pd_send_control(port, PD_CTRL_REJECT, TCPC_TX_SOP);
if (!port->explicit_contract) {
tcpm_set_state(port,
SRC_WAIT_NEW_CAPABILITIES, 0);
@@ -4226,7 +4262,7 @@ static void run_state_machine(struct tcpm_port *port)
tcpm_set_state(port, SRC_READY, 0);
}
} else {
- tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+ tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP);
tcpm_set_partner_usb_comm_capable(port,
!!(port->sink_request & RDO_USB_COMM));
tcpm_set_state(port, SRC_TRANSITION_SUPPLY,
@@ -4235,7 +4271,7 @@ static void run_state_machine(struct tcpm_port *port)
break;
case SRC_TRANSITION_SUPPLY:
/* XXX: regulator_set_voltage(vbus, ...) */
- tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
+ tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP);
port->explicit_contract = true;
typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_PD);
port->pwr_opmode = TYPEC_PWR_MODE_PD;
@@ -4720,7 +4756,7 @@ static void run_state_machine(struct tcpm_port *port)
/* remove existing capabilities */
usb_power_delivery_unregister_capabilities(port->partner_source_caps);
port->partner_source_caps = NULL;
- tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+ tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP);
tcpm_ams_finish(port);
if (port->pwr_role == TYPEC_SOURCE) {
port->upcoming_state = SRC_SEND_CAPABILITIES;
@@ -4737,28 +4773,41 @@ static void run_state_machine(struct tcpm_port *port)
tcpm_ams_start(port, SOFT_RESET_AMS);
break;
case SOFT_RESET_SEND:
- port->message_id = 0;
- port->rx_msgid = -1;
- /* remove existing capabilities */
- usb_power_delivery_unregister_capabilities(port->partner_source_caps);
- port->partner_source_caps = NULL;
- if (tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET))
- tcpm_set_state_cond(port, hard_reset_state(port), 0);
- else
- tcpm_set_state_cond(port, hard_reset_state(port),
- PD_T_SENDER_RESPONSE);
+ /*
+ * Power Delivery 3.0 Section 6.3.13
+ *
+ * A Soft_Reset Message Shall be targeted at a specific entity
+ * depending on the type of SOP* packet used.
+ */
+ if (port->tx_sop_type == TCPC_TX_SOP_PRIME) {
+ port->message_id_prime = 0;
+ port->rx_msgid_prime = -1;
+ tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET, TCPC_TX_SOP_PRIME);
+ tcpm_set_state_cond(port, ready_state(port), PD_T_SENDER_RESPONSE);
+ } else {
+ port->message_id = 0;
+ port->rx_msgid = -1;
+ /* remove existing capabilities */
+ usb_power_delivery_unregister_capabilities(port->partner_source_caps);
+ port->partner_source_caps = NULL;
+ if (tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET, TCPC_TX_SOP))
+ tcpm_set_state_cond(port, hard_reset_state(port), 0);
+ else
+ tcpm_set_state_cond(port, hard_reset_state(port),
+ PD_T_SENDER_RESPONSE);
+ }
break;

/* DR_Swap states */
case DR_SWAP_SEND:
- tcpm_pd_send_control(port, PD_CTRL_DR_SWAP);
+ tcpm_pd_send_control(port, PD_CTRL_DR_SWAP, TCPC_TX_SOP);
if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20)
port->send_discover = true;
tcpm_set_state_cond(port, DR_SWAP_SEND_TIMEOUT,
PD_T_SENDER_RESPONSE);
break;
case DR_SWAP_ACCEPT:
- tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+ tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP);
if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20)
port->send_discover = true;
tcpm_set_state_cond(port, DR_SWAP_CHANGE_DR, 0);
@@ -4782,7 +4831,7 @@ static void run_state_machine(struct tcpm_port *port)
break;

case FR_SWAP_SEND:
- if (tcpm_pd_send_control(port, PD_CTRL_FR_SWAP)) {
+ if (tcpm_pd_send_control(port, PD_CTRL_FR_SWAP, TCPC_TX_SOP)) {
tcpm_set_state(port, ERROR_RECOVERY, 0);
break;
}
@@ -4802,7 +4851,7 @@ static void run_state_machine(struct tcpm_port *port)
break;
case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED:
tcpm_set_pwr_role(port, TYPEC_SOURCE);
- if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) {
+ if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP)) {
tcpm_set_state(port, ERROR_RECOVERY, 0);
break;
}
@@ -4812,11 +4861,11 @@ static void run_state_machine(struct tcpm_port *port)

/* PR_Swap states */
case PR_SWAP_ACCEPT:
- tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+ tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP);
tcpm_set_state(port, PR_SWAP_START, 0);
break;
case PR_SWAP_SEND:
- tcpm_pd_send_control(port, PD_CTRL_PR_SWAP);
+ tcpm_pd_send_control(port, PD_CTRL_PR_SWAP, TCPC_TX_SOP);
tcpm_set_state_cond(port, PR_SWAP_SEND_TIMEOUT,
PD_T_SENDER_RESPONSE);
break;
@@ -4858,7 +4907,7 @@ static void run_state_machine(struct tcpm_port *port)
* supply is turned off"
*/
tcpm_set_pwr_role(port, TYPEC_SINK);
- if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) {
+ if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP)) {
tcpm_set_state(port, ERROR_RECOVERY, 0);
break;
}
@@ -4905,17 +4954,17 @@ static void run_state_machine(struct tcpm_port *port)
* Source."
*/
tcpm_set_pwr_role(port, TYPEC_SOURCE);
- tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
+ tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP);
tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START);
break;

case VCONN_SWAP_ACCEPT:
- tcpm_pd_send_control(port, PD_CTRL_ACCEPT);
+ tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP);
tcpm_ams_finish(port);
tcpm_set_state(port, VCONN_SWAP_START, 0);
break;
case VCONN_SWAP_SEND:
- tcpm_pd_send_control(port, PD_CTRL_VCONN_SWAP);
+ tcpm_pd_send_control(port, PD_CTRL_VCONN_SWAP, TCPC_TX_SOP);
tcpm_set_state(port, VCONN_SWAP_SEND_TIMEOUT,
PD_T_SENDER_RESPONSE);
break;
@@ -4934,14 +4983,34 @@ static void run_state_machine(struct tcpm_port *port)
PD_T_VCONN_SOURCE_ON);
break;
case VCONN_SWAP_TURN_ON_VCONN:
- tcpm_set_vconn(port, true);
- tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
- tcpm_set_state(port, ready_state(port), 0);
+ ret = tcpm_set_vconn(port, true);
+ tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP);
+ /*
+ * USB PD 3.0 Section 6.4.4.3.1
+ *
+ * Note that a Cable Plug or VPD will not be ready for PD
+ * Communication until tVCONNStable after VCONN has been applied
+ */
+ if (!ret)
+ tcpm_set_state(port, VCONN_SWAP_SEND_SOFT_RESET,
+ PD_T_VCONN_STABLE);
+ else
+ tcpm_set_state(port, ready_state(port), 0);
break;
case VCONN_SWAP_TURN_OFF_VCONN:
tcpm_set_vconn(port, false);
tcpm_set_state(port, ready_state(port), 0);
break;
+ case VCONN_SWAP_SEND_SOFT_RESET:
+ tcpm_swap_complete(port, port->swap_status);
+ if (tcpm_can_communicate_sop_prime(port)) {
+ port->tx_sop_type = TCPC_TX_SOP_PRIME;
+ port->upcoming_state = SOFT_RESET_SEND;
+ tcpm_ams_start(port, SOFT_RESET_AMS);
+ } else {
+ tcpm_set_state(port, ready_state(port), 0);
+ }
+ break;

case DR_SWAP_CANCEL:
case PR_SWAP_CANCEL:
@@ -4977,7 +5046,7 @@ static void run_state_machine(struct tcpm_port *port)
}
break;
case GET_STATUS_SEND:
- tcpm_pd_send_control(port, PD_CTRL_GET_STATUS);
+ tcpm_pd_send_control(port, PD_CTRL_GET_STATUS, TCPC_TX_SOP);
tcpm_set_state(port, GET_STATUS_SEND_TIMEOUT,
PD_T_SENDER_RESPONSE);
break;
@@ -4985,7 +5054,7 @@ static void run_state_machine(struct tcpm_port *port)
tcpm_set_state(port, ready_state(port), 0);
break;
case GET_PPS_STATUS_SEND:
- tcpm_pd_send_control(port, PD_CTRL_GET_PPS_STATUS);
+ tcpm_pd_send_control(port, PD_CTRL_GET_PPS_STATUS, TCPC_TX_SOP);
tcpm_set_state(port, GET_PPS_STATUS_SEND_TIMEOUT,
PD_T_SENDER_RESPONSE);
break;
@@ -4993,7 +5062,7 @@ static void run_state_machine(struct tcpm_port *port)
tcpm_set_state(port, ready_state(port), 0);
break;
case GET_SINK_CAP:
- tcpm_pd_send_control(port, PD_CTRL_GET_SINK_CAP);
+ tcpm_pd_send_control(port, PD_CTRL_GET_SINK_CAP, TCPC_TX_SOP);
tcpm_set_state(port, GET_SINK_CAP_TIMEOUT, PD_T_SENDER_RESPONSE);
break;
case GET_SINK_CAP_TIMEOUT:
@@ -5033,7 +5102,7 @@ static void run_state_machine(struct tcpm_port *port)

/* Chunk state */
case CHUNK_NOT_SUPP:
- tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP);
+ tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP, TCPC_TX_SOP);
tcpm_set_state(port, port->pwr_role == TYPEC_SOURCE ? SRC_READY : SNK_READY, 0);
break;
default:
diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h
index eb626af0e4e7..d50098fb16b5 100644
--- a/include/linux/usb/pd.h
+++ b/include/linux/usb/pd.h
@@ -483,6 +483,7 @@ static inline unsigned int rdo_max_power(u32 rdo)
#define PD_T_BIST_CONT_MODE 50 /* 30 - 60 ms */
#define PD_T_SINK_TX 16 /* 16 - 20 ms */
#define PD_T_CHUNK_NOT_SUPP 42 /* 40 - 50 ms */
+#define PD_T_VCONN_STABLE 50

#define PD_T_DRP_TRY 100 /* 75 - 150 ms */
#define PD_T_DRP_TRYWAIT 600 /* 400 - 800 ms */
--
2.43.0.472.g3155946c3a-goog