[PATCH 04/14] arm64: zynqmp: Add resets property for CAN nodes

[Michal Simek]

From: Srinivas Neeli <srinivas.neeli@xxxxxxx>

Added resets property for CAN nodes.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xxxxxxx>
Signed-off-by: Michal Simek <michal.simek@xxxxxxx>
---

 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index f72fb4ea3e11..c41c935f92b1 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -286,6 +286,7 @@ can0: can@ff060000 {
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
 			rx-fifo-depth = <0x40>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_CAN0>;
 			power-domains = <&zynqmp_firmware PD_CAN_0>;
 		};
 
@@ -298,6 +299,7 @@ can1: can@ff070000 {
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
 			rx-fifo-depth = <0x40>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_CAN1>;
 			power-domains = <&zynqmp_firmware PD_CAN_1>;
 		};
 
-- 
2.36.1