[PATCH v4 net-next 4/5] net: phy: marvell-88q2xxx: fix typos

From: Dimitri Fedrau
Date: Mon Jan 08 2024 - 04:40:14 EST


Rename mv88q2xxxx_get_sqi to mv88q2xxx_get_sqi and
mv88q2xxxx_get_sqi_max to mv88q2xxx_get_sqi_max.
Fix linebreaks and use everywhere hexadecimal numbers written with
lowercase letters instead of mixing it up.

Signed-off-by: Dimitri Fedrau <dima.fedrau@xxxxxxxxx>
---
drivers/net/phy/marvell-88q2xxx.c | 28 +++++++++++++++++-----------
1 file changed, 17 insertions(+), 11 deletions(-)

diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index 1c3ff77de56b..dcebb4643aff 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c
@@ -14,7 +14,7 @@
#define MDIO_MMD_AN_MV_STAT_MS_CONF_FAULT 0x8000

#define MDIO_MMD_PCS_MV_100BT1_STAT1 33032
-#define MDIO_MMD_PCS_MV_100BT1_STAT1_IDLE_ERROR 0x00FF
+#define MDIO_MMD_PCS_MV_100BT1_STAT1_IDLE_ERROR 0x00ff
#define MDIO_MMD_PCS_MV_100BT1_STAT1_JABBER 0x0100
#define MDIO_MMD_PCS_MV_100BT1_STAT1_LINK 0x0200
#define MDIO_MMD_PCS_MV_100BT1_STAT1_LOCAL_RX 0x1000
@@ -27,6 +27,8 @@
#define MDIO_MMD_PCS_MV_100BT1_STAT2_LINK 0x0004
#define MDIO_MMD_PCS_MV_100BT1_STAT2_ANGE 0x0008

+#define MDIO_MMD_PCS_MV_RX_STAT 33328
+
static int mv88q2xxx_soft_reset(struct phy_device *phydev)
{
int ret;
@@ -63,7 +65,8 @@ static int mv88q2xxx_read_link_gbit(struct phy_device *phydev)
* the link was already down.
*/
if (!phy_polling_mode(phydev) || !phydev->link) {
- ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_1000BT1_STAT);
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+ MDIO_PCS_1000BT1_STAT);
if (ret < 0)
return ret;
else if (ret & MDIO_PCS_1000BT1_STAT_LINK)
@@ -71,7 +74,8 @@ static int mv88q2xxx_read_link_gbit(struct phy_device *phydev)
}

if (!link) {
- ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_1000BT1_STAT);
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+ MDIO_PCS_1000BT1_STAT);
if (ret < 0)
return ret;
else if (ret & MDIO_PCS_1000BT1_STAT_LINK)
@@ -95,7 +99,8 @@ static int mv88q2xxx_read_link_100m(struct phy_device *phydev)
* we always read the realtime status.
*/
if (!phy_polling_mode(phydev) || !phydev->link) {
- ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_MMD_PCS_MV_100BT1_STAT1);
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+ MDIO_MMD_PCS_MV_100BT1_STAT1);
if (ret < 0)
return ret;
else if (ret & MDIO_MMD_PCS_MV_100BT1_STAT1_LINK)
@@ -200,7 +205,7 @@ static int mv88q2xxx_config_init(struct phy_device *phydev)
return mv88q2xxx_config_aneg(phydev);
}

-static int mv88q2xxxx_get_sqi(struct phy_device *phydev)
+static int mv88q2xxx_get_sqi(struct phy_device *phydev)
{
int ret;

@@ -208,7 +213,8 @@ static int mv88q2xxxx_get_sqi(struct phy_device *phydev)
/* Read the SQI from the vendor specific receiver status
* register
*/
- ret = phy_read_mmd(phydev, MDIO_MMD_PCS, 0x8230);
+ ret = phy_read_mmd(phydev, MDIO_MMD_PCS,
+ MDIO_MMD_PCS_MV_RX_STAT);
if (ret < 0)
return ret;

@@ -218,7 +224,7 @@ static int mv88q2xxxx_get_sqi(struct phy_device *phydev)
* but can be found in the Software Initialization Guide. Only
* revisions >= A0 are supported.
*/
- ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, 0xFC5D, 0x00FF, 0x00AC);
+ ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, 0xfc5d, 0xff, 0xac);
if (ret < 0)
return ret;

@@ -227,10 +233,10 @@ static int mv88q2xxxx_get_sqi(struct phy_device *phydev)
return ret;
}

- return ret & 0x0F;
+ return ret & 0x0f;
}

-static int mv88q2xxxx_get_sqi_max(struct phy_device *phydev)
+static int mv88q2xxx_get_sqi_max(struct phy_device *phydev)
{
return 15;
}
@@ -246,8 +252,8 @@ static struct phy_driver mv88q2xxx_driver[] = {
.read_status = mv88q2xxx_read_status,
.soft_reset = mv88q2xxx_soft_reset,
.set_loopback = genphy_c45_loopback,
- .get_sqi = mv88q2xxxx_get_sqi,
- .get_sqi_max = mv88q2xxxx_get_sqi_max,
+ .get_sqi = mv88q2xxx_get_sqi,
+ .get_sqi_max = mv88q2xxx_get_sqi_max,
},
};

--
2.39.2