Re: [PATCH] ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140

[Takashi Iwai]

On Thu, 04 Jan 2024 12:10:44 +0100,
bo liu wrote:
> 
> When OMTP headset plugin the headset jack of CX8070 and SN6160 sound cards,
> the headset type detection circuit will recognize the headset type as CTIA.
> At this point, plugout and plugin the headset will get the correct headset
> type as OMTP.
> The reason for the failure of headset type recognition is that the sound
> card creation will enable the VREF voltage of the headset mic, which
> interferes with the headset type automatic detection circuit. Plugout and
> plugin the headset will restart the headset detection and get the correct
> headset type.
> The patch is disable the VREF voltage when the headset is not present, and
> will enable the VREF voltage when the headset is present.
> 
> Signed-off-by: bo liu <bo.liu@xxxxxxxxxxxxxx>

Please put the revision number to the subject prefix, i.e.
"Subject: [PATCH v3] ALSA: hda/conexant: ...."

> +static void cx_fixup_headset_recog(struct hda_codec *codec)
> +{
> +	unsigned int mic_persent;
> +
> +	/* fix some headset type recognize fail issue, such as EDIFIER headset */
> +	snd_hda_codec_write(codec, 0x1c, 0, 0x320, 0x010);
> +	snd_hda_codec_write(codec, 0x1c, 0, 0x3b0, 0xe10);
> +	snd_hda_codec_write(codec, 0x1c, 0, 0x4f0, 0x0eb);

Please use the defined verbs in sound/hda_verbs.h.
The arguments (0x320, 0x010) are (AC_VERB_SET_AMP_GAIN_MUTE, 0x2010)
etc.

Also, it's still not clear what if other nodes are used for headphone
and mic pins -- or when either only headphone or only mic is present.
A rare case, but we need to cover.

> +	/* fix reboot headset type recognize fail issue */
> +	mic_persent = snd_hda_codec_read(codec, 0x19, 0, AC_VERB_GET_PIN_SENSE, 0x0);
> +	if (mic_persent&0x80000000)

A coding style problem.  Similar issues seen in a few other places,
too.  Consult scripts/checkpatch.pl.

> +enum {
> +	CX_HEADSET_NOPRESENT = 0,
> +	CX_HEADSET_PARTPRESENT,
> +	CX_HEADSET_ALLPRESENT,
> +};

This should be defined earlier.  You can use the enum type for
spec->headset_present_flag, too.

> +static void cx_process_headset_plugin(struct hda_codec *codec)
> +{
> +	unsigned int val;
> +	unsigned int count = 0;
> +
> +	/* Wait headset detect done. */
> +	do {
> +		val = snd_hda_codec_read(codec, 0x1c, 0, 0xca0, 0x0);

Use the verb: AC_VERB_GET_PROC_COEF, 0xa000.
At best, define the COEF values 0xa000 and 0xb000, and the
corresponding value bits, too.

> +static void cx_update_headset_mic_vref(struct hda_codec *codec, unsigned int res)
> +{
> +	unsigned int phone_present, mic_persent, phone_tag, mic_tag;
> +	struct conexant_spec *spec = codec->spec;
> +
> +	/* In cx8070 and sn6140, headset is fixed to use node 16 and node 19.

Is it really guaranteed?  IMO, we should check the pin configs
beforehand at the parsing time.


thanks,

Takashi