Re: [PATCH v7 3/3] mmc: rtsx: add rts5264 to support sd express card

[Ulf Hansson]

On Fri, 8 Dec 2023 at 04:22, Ricky Wu <ricky_wu@xxxxxxxxxxx> wrote:
>
> rts5264 can support sd express card, so add the id in sd express card init
> to do rts5264 register setting when the sd express card insert
>
> Signed-off-by: Ricky Wu <ricky_wu@xxxxxxxxxxx>

Greg, unless you think it's too late to get this in for v6.8, feel
free to pick this mmc patch too as a part of the series.

Acked-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>

Kind regards
Uffe

> ---
> v3: split up mmc part from v2 patch
> v4: split new definition up from v3
> ---
> ---
>  drivers/mmc/host/rtsx_pci_sdmmc.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
> index 87d78432a1e0..7dfe7c4e0077 100644
> --- a/drivers/mmc/host/rtsx_pci_sdmmc.c
> +++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
> @@ -7,6 +7,7 @@
>   *   Wei WANG <wei_wang@xxxxxxxxxxxxxx>
>   */
>
> +#include <linux/pci.h>
>  #include <linux/module.h>
>  #include <linux/slab.h>
>  #include <linux/highmem.h>
> @@ -947,7 +948,7 @@ static int sd_power_on(struct realtek_pci_sdmmc *host, unsigned char power_mode)
>         /* send at least 74 clocks */
>         rtsx_pci_write_register(pcr, SD_BUS_STAT, SD_CLK_TOGGLE_EN, SD_CLK_TOGGLE_EN);
>
> -       if (PCI_PID(pcr) == PID_5261) {
> +       if ((PCI_PID(pcr) == PID_5261) || (PCI_PID(pcr) == PID_5264)) {
>                 /*
>                  * If test mode is set switch to SD Express mandatorily,
>                  * this is only for factory testing.
> @@ -1364,6 +1365,14 @@ static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
>         struct realtek_pci_sdmmc *host = mmc_priv(mmc);
>         struct rtsx_pcr *pcr = host->pcr;
>
> +       if (PCI_PID(pcr) == PID_5264) {
> +               pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL2,
> +                               PCI_EXP_LNKCTL2_TLS, PCI_EXP_LNKCTL2_TLS_2_5GT);
> +               pci_write_config_byte(pcr->pci, 0x80e, 0x02);
> +               pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL2,
> +                               PCI_EXP_LNKCTL2_TLS, PCI_EXP_LNKCTL2_TLS_5_0GT);
> +       }
> +
>         /* Set relink_time for changing to PCIe card */
>         relink_time = 0x8FFF;
>
> @@ -1379,6 +1388,12 @@ static int sdmmc_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
>         if (pcr->ops->disable_auto_blink)
>                 pcr->ops->disable_auto_blink(pcr);
>
> +       if (PCI_PID(pcr) == PID_5264) {
> +               rtsx_pci_write_register(pcr, RTS5264_AUTOLOAD_CFG2,
> +                       RTS5264_CHIP_RST_N_SEL, RTS5264_CHIP_RST_N_SEL);
> +               rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00);
> +       }
> +
>         /* For PCIe/NVMe mode can't enter delink issue */
>         pcr->hw_param.interrupt_en &= ~(SD_INT_EN);
>         rtsx_pci_writel(pcr, RTSX_BIER, pcr->hw_param.interrupt_en);
> --
> 2.25.1
>