RE: [EXT] Re: [PATCH v11 7/7] phy: freescale: Add HDMI PHY driver for i.MX8MQ

From: Sandor Yu
Date: Thu Jan 04 2024 - 22:21:54 EST

Next message: Kai-Heng Feng: "Re: [Regression] [PCI/ASPM] [ASUS PN51] Reboot on resume attempt (bisect done; commit found)"
Previous message: Sandor Yu: "RE: [EXT] Re: [PATCH v11 6/7] phy: freescale: Add DisplayPort PHY driver for i.MX8MQ"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Alexander,

Thanks for your comments,

> -----Original Message-----
> From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> Sent: 2023年10月17日 21:17
> To: dmitry.baryshkov@xxxxxxxxxx; andrzej.hajda@xxxxxxxxx;
> neil.armstrong@xxxxxxxxxx; Laurent.pinchart@xxxxxxxxxxxxxxxx;
> jonas@xxxxxxxxx; jernej.skrabec@xxxxxxxxx; airlied@xxxxxxxxx;
> daniel@xxxxxxxx; robh+dt@xxxxxxxxxx; krzysztof.kozlowski+dt@xxxxxxxxxx;
> shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> vkoul@xxxxxxxxxx; dri-devel@xxxxxxxxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-phy@xxxxxxxxxxxxxxxxxxx; Sandor Yu
> <sandor.yu@xxxxxxx>
> Cc: kernel@xxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>; Sandor Yu
> <sandor.yu@xxxxxxx>; Oliver Brown <oliver.brown@xxxxxxx>;
> sam@xxxxxxxxxxxx
> Subject: [EXT] Re: [PATCH v11 7/7] phy: freescale: Add HDMI PHY driver for
> i.MX8MQ
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> Hi Sandor,
>
> thanks for the patch.
>
> Am Dienstag, 17. Oktober 2023, 09:04:03 CEST schrieb Sandor Yu:
> > Add Cadence HDP-TX HDMI PHY driver for i.MX8MQ.
> >
> > Cadence HDP-TX PHY could be put in either DP mode or HDMI mode base
> on
> > the configuration chosen.
> > HDMI PHY mode is configurated in the driver.
> >
> > Signed-off-by: Sandor Yu <Sandor.yu@xxxxxxx>
> > Tested-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> > ---
> > v9->v11:
> > *No change.
> >
> > drivers/phy/freescale/Kconfig | 10 +
> > drivers/phy/freescale/Makefile | 1 +
> > drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c | 961
> > ++++++++++++++++++++
> > 3 files changed, 972 insertions(+)
> > create mode 100644 drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c
> >
> > diff --git a/drivers/phy/freescale/Kconfig
> > b/drivers/phy/freescale/Kconfig index c39709fd700ac..14f47b7cc77ab
> > 100644
> > --- a/drivers/phy/freescale/Kconfig
> > +++ b/drivers/phy/freescale/Kconfig
> > @@ -45,6 +45,16 @@ config PHY_FSL_IMX8MQ_DP
> > Enable this to support the Cadence HDPTX DP PHY driver
> > on i.MX8MQ SOC.
> >
> > +config PHY_FSL_IMX8MQ_HDMI
> > + tristate "Freescale i.MX8MQ HDMI PHY support"
> > + depends on OF && HAS_IOMEM
> > + depends on COMMON_CLK
> > + select GENERIC_PHY
> > + select CDNS_MHDP_HELPER
> > + help
> > + Enable this to support the Cadence HDPTX HDMI PHY driver
> > + on i.MX8MQ SOC.
> > +
> > endif
> >
> > config PHY_FSL_LYNX_28G
> > diff --git a/drivers/phy/freescale/Makefile
> > b/drivers/phy/freescale/Makefile index 47e5285209fa8..1380ac31c2ead
> > 100644
> > --- a/drivers/phy/freescale/Makefile
> > +++ b/drivers/phy/freescale/Makefile
> > @@ -1,5 +1,6 @@
> > # SPDX-License-Identifier: GPL-2.0-only
> > obj-$(CONFIG_PHY_FSL_IMX8MQ_DP) +=
> phy-fsl-imx8mq-dp.o
> > +obj-$(CONFIG_PHY_FSL_IMX8MQ_HDMI) += phy-fsl-imx8mq-hdmi.o
> > obj-$(CONFIG_PHY_FSL_IMX8MQ_USB) += phy-fsl-imx8mq-usb.o
> > obj-$(CONFIG_PHY_MIXEL_LVDS_PHY) +=
> phy-fsl-imx8qm-lvds-phy.o
> > obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o
> > diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c
> > b/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c new file mode 100644
> > index 0000000000000..9722b5e1803c7
> > --- /dev/null
> > +++ b/drivers/phy/freescale/phy-fsl-imx8mq-hdmi.c
> > @@ -0,0 +1,961 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Cadence High-Definition Multimedia Interface (HDMI) PHY driver
> > + *
> > + * Copyright (C) 2022,2023 NXP Semiconductor, Inc.
> > + */
> > +#include <asm/unaligned.h>
> > +#include <drm/bridge/cdns-mhdp-helper.h> #include <linux/clk.h>
> > +#include <linux/kernel.h> #include <linux/phy/phy.h> #include
> > +<linux/platform_device.h> #include <linux/io.h>
> > +
> > +#define ADDR_PHY_AFE 0x80000
> > +
> > +/* PHY registers */
> > +#define CMN_SSM_BIAS_TMR 0x0022
> > +#define CMN_PLLSM0_USER_DEF_CTRL 0x002f
> > +#define CMN_PSM_CLK_CTRL 0x0061
> > +#define CMN_CDIAG_REFCLK_CTRL 0x0062
> > +#define CMN_PLL0_VCOCAL_START 0x0081
> > +#define CMN_PLL0_VCOCAL_INIT_TMR 0x0084
> > +#define CMN_PLL0_VCOCAL_ITER_TMR 0x0085
> > +#define CMN_TXPUCAL_CTRL 0x00e0
> > +#define CMN_TXPDCAL_CTRL 0x00f0
> > +#define CMN_TXPU_ADJ_CTRL 0x0108
> > +#define CMN_TXPD_ADJ_CTRL 0x010c
> > +#define CMN_DIAG_PLL0_FBH_OVRD 0x01c0
> > +#define CMN_DIAG_PLL0_FBL_OVRD 0x01c1
> > +#define CMN_DIAG_PLL0_OVRD 0x01c2
> > +#define CMN_DIAG_PLL0_TEST_MODE 0x01c4
> > +#define CMN_DIAG_PLL0_V2I_TUNE 0x01c5
> > +#define CMN_DIAG_PLL0_CP_TUNE 0x01c6
> > +#define CMN_DIAG_PLL0_LF_PROG 0x01c7
> > +#define CMN_DIAG_PLL0_PTATIS_TUNE1 0x01c8
> > +#define CMN_DIAG_PLL0_PTATIS_TUNE2 0x01c9
> > +#define CMN_DIAG_PLL0_INCLK_CTRL 0x01ca
> > +#define CMN_DIAG_PLL0_PXL_DIVH 0x01cb
> > +#define CMN_DIAG_PLL0_PXL_DIVL 0x01cc
> > +#define CMN_DIAG_HSCLK_SEL 0x01e0
> > +#define XCVR_PSM_RCTRL 0x4001
> > +#define TX_TXCC_CAL_SCLR_MULT_0 0x4047
> > +#define TX_TXCC_CPOST_MULT_00_0 0x404c
> > +#define XCVR_DIAG_PLLDRC_CTRL 0x40e0
> > +#define XCVR_DIAG_PLLDRC_CTRL 0x40e0
> > +#define XCVR_DIAG_HSCLK_SEL 0x40e1
> > +#define XCVR_DIAG_BIDI_CTRL 0x40e8
> > +#define TX_PSC_A0 0x4100
> > +#define TX_PSC_A1 0x4101
> > +#define TX_PSC_A2 0x4102
> > +#define TX_PSC_A3 0x4103
> > +#define TX_DIAG_TX_CTRL 0x41e0
> > +#define TX_DIAG_TX_DRV 0x41e1
> > +#define TX_DIAG_BGREF_PREDRV_DELAY 0x41e7
> > +#define TX_DIAG_ACYA_0 0x41ff
> > +#define TX_DIAG_ACYA_1 0x43ff
> > +#define TX_DIAG_ACYA_2 0x45ff
> > +#define TX_DIAG_ACYA_3 0x47ff
> > +#define TX_ANA_CTRL_REG_1 0x5020
> > +#define TX_ANA_CTRL_REG_2 0x5021
> > +#define TX_DIG_CTRL_REG_2 0x5024
> > +#define TXDA_CYA_AUXDA_CYA 0x5025
> > +#define TX_ANA_CTRL_REG_3 0x5026
> > +#define TX_ANA_CTRL_REG_4 0x5027
> > +#define TX_ANA_CTRL_REG_5 0x5029
> > +#define RX_PSC_A0 0x8000
> > +#define RX_PSC_CAL 0x8006
> > +#define PHY_HDP_MODE_CTRL 0xc008
> > +#define PHY_HDP_CLK_CTL 0xc009
> > +#define PHY_ISO_CMN_CTRL 0xc010
> > +#define PHY_PMA_CMN_CTRL1 0xc800
> > +#define PHY_PMA_ISO_CMN_CTRL 0xc810
> > +#define PHY_PMA_ISO_PLL_CTRL1 0xc812
> > +#define PHY_PMA_ISOLATION_CTRL 0xc81f
> > +
> > +/* PHY_HDP_CLK_CTL */
> > +#define PLL_DATA_RATE_CLK_DIV_MASK GENMASK(15, 8)
> > +#define PLL_DATA_RATE_CLK_DIV_HBR 0x24
> > +#define PLL_DATA_RATE_CLK_DIV_HBR2 0x12
> > +#define PLL_CLK_EN_ACK_EN BIT(3)
> > +#define PLL_CLK_EN BIT(2)
> > +#define PLL_READY BIT(1)
> > +#define PLL_EN BIT(0)
> > +
> > +/* PHY_PMA_CMN_CTRL1 */
> > +#define CMA_REF_CLK_DIG_DIV_MASK GENMASK(13, 12)
> > +#define CMA_REF_CLK_SEL_MASK GENMASK(6, 4)
> > +#define CMA_REF_CLK_RCV_EN_MASK BIT(3)
> > +#define CMA_REF_CLK_RCV_EN 1
> > +#define CMN_READY BIT(0)
> > +
> > +/* PHY_PMA_ISO_PLL_CTRL1 */
> > +#define CMN_PLL0_CLK_DATART_DIV_MASK GENMASK(7, 0)
> > +
> > +/* TX_DIAG_TX_DRV */
> > +#define TX_DRIVER_PROG_BOOST_ENABLE BIT(10)
> > +#define TX_DRIVER_PROG_BOOST_LEVEL_MASK
> GENMASK(9, 8)
> > +#define TX_DRIVER_LDO_BG_DEPENDENT_REF_ENABLE BIT(7)
> > +#define TX_DRIVER_LDO_BANDGAP_REF_ENABLE BIT(6)
> > +
> > +/* TX_TXCC_CAL_SCLR_MULT_0 */
> > +#define SCALED_RESISTOR_CALIBRATION_CODE_ADD BIT(8)
> > +#define RESISTOR_CAL_MULT_VAL_32_128 BIT(5)
> > +
> > +/* CMN_CDIAG_REFCLK_CTRL */
> > +#define DIG_REF_CLK_DIV_SCALER_MASK GENMASK(14, 12)
> > +#define REFCLK_TERMINATION_EN_OVERRIDE_EN BIT(7)
> > +#define REFCLK_TERMINATION_EN_OVERRIDE BIT(6)
> > +
> > +/* CMN_DIAG_HSCLK_SEL */
> > +#define HSCLK1_SEL_MASK
> GENMASK(5, 4)
> > +#define HSCLK0_SEL_MASK
> GENMASK(1, 0)
> > +
> > +/* XCVR_DIAG_HSCLK_SEL */
> > +#define HSCLK_SEL_MODE3_MASK GENMASK(13, 12)
> > +#define HSCLK_SEL_MODE3_HSCLK1 1
> > +
> > +/* CMN_PLL0_VCOCAL_START */
> > +#define VCO_CALIB_CODE_START_POINT_VAL_MASK GENMASK(8, 0)
> > +
> > +/* CMN_DIAG_PLL0_FBH_OVRD */
> > +#define PLL_FEEDBACK_DIV_HI_OVERRIDE_EN BIT(15)
> > +
> > +/* CMN_DIAG_PLL0_FBL_OVRD */
> > +#define PLL_FEEDBACK_DIV_LO_OVERRIDE_EN BIT(15)
> > +
> > +/* CMN_DIAG_PLL0_PXL_DIVH */
> > +#define PLL_PCLK_DIV_EN BIT(15)
> > +
> > +/* XCVR_DIAG_PLLDRC_CTRL */
> > +#define DPLL_CLK_SEL_MODE3 BIT(14)
> > +
> > +/* TX_DIAG_TX_CTRL */
> > +#define TX_IF_SUBRATE_MODE3_MASK GENMASK(7, 6)
> > +
> > +/* PHY_HDP_MODE_CTRL */
> > +#define POWER_STATE_A3_ACK BIT(7)
> > +#define POWER_STATE_A2_ACK BIT(6)
> > +#define POWER_STATE_A1_ACK BIT(5)
> > +#define POWER_STATE_A0_ACK BIT(4)
> > +#define POWER_STATE_A3 BIT(3)
> > +#define POWER_STATE_A2 BIT(2)
> > +#define POWER_STATE_A1 BIT(1)
> > +#define POWER_STATE_A0 BIT(0)
> > +
> > +/* PHY_PMA_ISO_CMN_CTRL */
> > +#define CMN_MACRO_PWR_EN_ACK BIT(5)
> > +
> > +#define KEEP_ALIVE 0x18
> > +
> > +#define REF_CLK_27MHZ 27000000
> > +
> > +/* HDMI TX clock control settings */
> > +struct hdptx_hdmi_ctrl {
> > + u32 pixel_clk_freq_min;
> > + u32 pixel_clk_freq_max;
> > + u32 feedback_factor;
> > + u32 data_range_kbps_min;
> > + u32 data_range_kbps_max;
> > + u32 cmnda_pll0_ip_div;
> > + u32 cmn_ref_clk_dig_div;
> > + u32 ref_clk_divider_scaler;
> > + u32 pll_fb_div_total;
> > + u32 cmnda_pll0_fb_div_low;
> > + u32 cmnda_pll0_fb_div_high;
> > + u32 pixel_div_total;
> > + u32 cmnda_pll0_pxdiv_low;
> > + u32 cmnda_pll0_pxdiv_high;
> > + u32 vco_freq_min;
> > + u32 vco_freq_max;
> > + u32 vco_ring_select;
> > + u32 cmnda_hs_clk_0_sel;
> > + u32 cmnda_hs_clk_1_sel;
> > + u32 hsclk_div_at_xcvr;
> > + u32 hsclk_div_tx_sub_rate;
> > + u32 cmnda_pll0_hs_sym_div_sel;
> > + u32 cmnda_pll0_clk_freq_min;
> > + u32 cmnda_pll0_clk_freq_max;
> > +};
> > +
> > +struct cdns_hdptx_hdmi_phy {
> > + struct cdns_mhdp_base base;
> > +
> > + void __iomem *regs; /* DPTX registers base */
> > + struct mutex mbox_mutex; /* mutex to protect mailbox */
> > + struct device *dev;
> > + struct phy *phy;
> > + struct clk *ref_clk, *apb_clk;
> > + u32 ref_clk_rate;
> > + u32 pixel_clk_rate;
> > + enum hdmi_colorspace color_space;
> > + u32 bpc;
> > +};
> > +
> > +/* HDMI TX clock control settings, pixel clock is output */ static
> > +const struct hdptx_hdmi_ctrl pixel_clk_output_ctrl_table[] = {
> > +/*Minclk Maxclk Fdbak DR_min DR_max ip_d dig DS Totl
> */
> > +{ 27000, 27000, 1000, 270000, 270000, 0x03, 0x1, 0x1, 240, 0x0bc,
> > 0x030, 80, 0x026, 0x026, 2160000, 2160000, 0, 2, 2, 2, 4, 0x3,
> > 27000, 27000}, +{ 27000, 27000, 1250, 337500, 337500, 0x03, 0x1,
> > 0x1, 300, 0x0ec, 0x03c, 100, 0x030, 0x030, 2700000, 2700000, 0, 2, 2,
> > 2, 4, 0x3, 33750, 33750}, +{ 27000, 27000, 1500, 405000, 405000,
> > 0x03, 0x1, 0x1, 360, 0x11c, 0x048, 120, 0x03a, 0x03a, 3240000,
> > 3240000, 0, 2, 2, 2, 4, 0x3, 40500, 40500}, +{ 27000, 27000, 2000,
> > 540000, 540000, 0x03, 0x1, 0x1, 240, 0x0bc, 0x030, 80, 0x026, 0x026,
> > 2160000, 2160000, 0, 2, 2, 2, 4, 0x2, 54000, 54000}, +{ 54000,
> > 54000, 1000, 540000, 540000, 0x03, 0x1, 0x1, 480, 0x17c, 0x060, 80,
> > 0x026, 0x026, 4320000, 4320000, 1, 2, 2, 2, 4, 0x3, 54000, 54000},
> > +{ 54000, 54000, 1250, 675000, 675000, 0x04, 0x1, 0x1, 400, 0x13c,
> > 0x050, 50, 0x017, 0x017, 2700000, 2700000, 0, 1, 1, 2, 4, 0x2,
> > 67500, 67500}, +{ 54000, 54000, 1500, 810000, 810000, 0x04, 0x1,
> > 0x1, 480, 0x17c, 0x060, 60, 0x01c, 0x01c, 3240000, 3240000, 0, 2, 2,
> > 2, 2, 0x2, 81000, 81000}, +{ 54000, 54000, 2000, 1080000, 1080000,
> > 0x03, 0x1, 0x1, 240, 0x0bc, 0x030, 40, 0x012, 0x012, 2160000,
> > 2160000, 0, 2, 2, 2, 1, 0x1, 108000, 108000}, +{ 74250, 74250, 1000,
> > 742500, 742500, 0x03, 0x1, 0x1, 660, 0x20c, 0x084, 80, 0x026, 0x026,
> > 5940000, 5940000, 1, 2, 2, 2, 4, 0x3, 74250, 74250}, +{ 74250,
> > 74250, 1250, 928125, 928125, 0x04, 0x1, 0x1, 550, 0x1b4, 0x06e, 50,
> > 0x017, 0x017, 3712500, 3712500, 1, 1, 1, 2, 4, 0x2, 92812, 92812},
> > +{ 74250, 74250, 1500, 1113750, 1113750, 0x04, 0x1, 0x1, 660, 0x20c,
> > 0x084, 60, 0x01c, 0x01c, 4455000, 4455000, 1, 2, 2, 2, 2, 0x2,
> > 111375, 111375}, +{ 74250, 74250, 2000, 1485000, 1485000, 0x03, 0x1,
> > 0x1, 330, 0x104, 0x042, 40, 0x012, 0x012, 2970000, 2970000, 0, 2, 2,
> > 2, 1, 0x1, 148500, 148500}, +{ 99000, 99000, 1000, 990000, 990000,
> > 0x03, 0x1, 0x1, 440, 0x15c, 0x058, 40, 0x012, 0x012, 3960000,
> > 3960000, 1, 2, 2, 2, 2, 0x2, 99000, 99000}, +{ 99000, 99000, 1250,
> > 1237500, 1237500, 0x03, 0x1, 0x1, 275, 0x0d8, 0x037, 25, 0x00b,
> > 0x00a, 2475000, 2475000, 0, 1, 1, 2, 2, 0x1, 123750, 123750}, +{
> > 99000, 99000, 1500, 1485000, 1485000, 0x03, 0x1, 0x1, 330, 0x104,
> > 0x042, 30, 0x00d, 0x00d, 2970000, 2970000, 0, 2, 2, 2, 1, 0x1,
> > 148500, 148500}, +{ 99000, 99000, 2000, 1980000, 1980000, 0x03, 0x1,
> > 0x1, 440, 0x15c, 0x058, 40, 0x012, 0x012, 3960000, 3960000, 1, 2, 2,
> > 2, 1, 0x1, 198000, 198000}, +{148500, 148500, 1000, 1485000, 1485000,
> > 0x03, 0x1, 0x1, 660, 0x20c, 0x084, 40, 0x012, 0x012, 5940000,
> > 5940000, 1, 2, 2, 2, 2, 0x2, 148500, 148500}, +{148500, 148500, 1250,
> > 1856250, 1856250, 0x04, 0x1, 0x1, 550, 0x1b4, 0x06e, 25, 0x00b,
> > 0x00a, 3712500, 3712500, 1, 1, 1, 2, 2, 0x1, 185625, 185625},
> > +{148500, 148500, 1500, 2227500, 2227500, 0x03, 0x1, 0x1, 495, 0x188,
> > 0x063, 30, 0x00d, 0x00d, 4455000, 4455000, 1, 1, 1, 2, 2, 0x1,
> > 222750, 222750}, +{148500, 148500, 2000, 2970000, 2970000, 0x03, 0x1,
> > 0x1, 660, 0x20c, 0x084, 40, 0x012, 0x012, 5940000, 5940000, 1, 2, 2,
> > 2, 1, 0x1, 297000, 297000}, +{198000, 198000, 1000, 1980000, 1980000,
> > 0x03, 0x1, 0x1, 220, 0x0ac, 0x02c, 10, 0x003, 0x003, 1980000,
> > 1980000, 0, 1, 1, 2, 1, 0x0, 198000, 198000}, +{198000, 198000, 1250,
> > 2475000, 2475000, 0x03, 0x1, 0x1, 550, 0x1b4, 0x06e, 25, 0x00b,
> > 0x00a, 4950000, 4950000, 1, 1, 1, 2, 2, 0x1, 247500, 247500},
> > +{198000, 198000, 1500, 2970000, 2970000, 0x03, 0x1, 0x1, 330, 0x104,
> > 0x042, 15, 0x006, 0x005, 2970000, 2970000, 0, 1, 1, 2, 1, 0x0,
> > 297000, 297000}, +{198000, 198000, 2000, 3960000, 3960000, 0x03, 0x1,
> > 0x1, 440, 0x15c, 0x058, 20, 0x008, 0x008, 3960000, 3960000, 1, 1, 1,
> > 2, 1, 0x0, 396000, 396000}, +{297000, 297000, 1000, 2970000, 2970000,
> > 0x03, 0x1, 0x1, 330, 0x104, 0x042, 10, 0x003, 0x003, 2970000,
> > 2970000, 0, 1, 1, 2, 1, 0x0, 297000, 297000}, +{297000, 297000, 1500,
> > 4455000, 4455000, 0x03, 0x1, 0x1, 495, 0x188, 0x063, 15, 0x006,
> > 0x005, 4455000, 4455000, 1, 1, 1, 2, 1, 0x0, 445500, 445500},
> > +{297000, 297000, 2000, 5940000, 5940000, 0x03, 0x1, 0x1, 660, 0x20c,
> > 0x084, 20, 0x008, 0x008, 5940000, 5940000, 1, 1, 1, 2, 1, 0x0,
> > 594000, 594000}, +{594000, 594000, 1000, 5940000, 5940000, 0x03, 0x1,
> > 0x1, 660, 0x20c, 0x084, 10, 0x003, 0x003, 5940000, 5940000, 1, 1, 1,
> > 2, 1, 0x0, 594000, 594000}, +{594000, 594000, 750, 4455000, 4455000,
> > 0x03, 0x1, 0x1, 495, 0x188, 0x063, 10, 0x003, 0x003, 4455000,
> > 4455000, 1, 1, 1, 2, 1, 0x0, 445500, 445500}, +{594000, 594000, 625,
> > 3712500, 3712500, 0x04, 0x1, 0x1, 550, 0x1b4, 0x06e, 10, 0x003,
> > 0x003, 3712500, 3712500, 1, 1, 1, 2, 1, 0x0, 371250, 371250},
> > +{594000, 594000, 500, 2970000, 2970000, 0x03, 0x1, 0x1, 660, 0x20c,
> > 0x084, 10, 0x003, 0x003, 5940000, 5940000, 1, 1, 1, 2, 2, 0x1,
> > 297000, 297000}, +};
> > +
> > +/* HDMI TX PLL tuning settings */
> > +struct hdptx_hdmi_pll_tuning {
> > + u32 vco_freq_bin;
> > + u32 vco_freq_min;
> > + u32 vco_freq_max;
> > + u32 volt_to_current_coarse;
> > + u32 volt_to_current;
> > + u32 ndac_ctrl;
> > + u32 pmos_ctrl;
> > + u32 ptat_ndac_ctrl;
> > + u32 feedback_div_total;
> > + u32 charge_pump_gain;
> > + u32 coarse_code;
> > + u32 v2i_code;
> > + u32 vco_cal_code;
> > +};
> > +
> > +/* HDMI TX PLL tuning settings, pixel clock is output */ static const
> > +struct hdptx_hdmi_pll_tuning pixel_clk_output_pll_table[] = { /*bin
> > +VCO_freq min/max coar cod NDAC PMOS PTAT div-T P-Gain Coa V2I
> CAL
> > */ +{ 1, 1980000, 1980000, 0x4, 0x3, 0x0, 0x09, 0x09, 220, 0x42, 160,
> > 5,
> > 183 }, +{ 2, 2160000, 2160000, 0x4, 0x3, 0x0, 0x09, 0x09, 240, 0x42,
> > 166, 6, 208 }, +{ 3, 2475000, 2475000, 0x5, 0x3, 0x1, 0x00, 0x07,
> > 275, 0x42, 167, 6, 209 }, +{ 4, 2700000, 2700000, 0x5, 0x3, 0x1,
> > 0x00, 0x07, 300, 0x42, 188, 6, 230 }, +{ 4, 2700000, 2700000, 0x5,
> > 0x3, 0x1, 0x00, 0x07, 400, 0x4c, 188, 6, 230 }, +{ 5, 2970000,
> > 2970000, 0x6, 0x3, 0x1, 0x00, 0x07, 330, 0x42, 183, 6, 225 }, +{ 6,
> > 3240000, 3240000, 0x6, 0x3, 0x1, 0x00, 0x07, 360, 0x42, 203, 7, 256 },
> > +{ 6, 3240000, 3240000, 0x6, 0x3, 0x1, 0x00, 0x07, 480, 0x4c, 203, 7,
> > 256 }, +{ 7, 3712500, 3712500, 0x4, 0x3, 0x0, 0x07, 0x0F, 550, 0x4c,
> > 212, 7, 257 }, +{ 8, 3960000, 3960000, 0x5, 0x3, 0x0, 0x07, 0x0F,
> > 440, 0x42, 184, 6, 226 }, +{ 9, 4320000, 4320000, 0x5, 0x3, 0x1,
> > 0x07, 0x0F, 480, 0x42, 205, 7, 258 }, +{ 10, 4455000, 4455000, 0x5,
> > 0x3, 0x0, 0x07, 0x0F, 495, 0x42, 219, 7, 272 }, +{ 10, 4455000,
> > 4455000, 0x5, 0x3, 0x0, 0x07, 0x0F, 660, 0x4c, 219, 7, 272 },
> > +{ 11, 4950000, 4950000, 0x6, 0x3, 0x1, 0x00, 0x07, 550, 0x42, 213, 7,
> > +258
> > }, +{ 12, 5940000, 5940000, 0x7, 0x3, 0x1, 0x00, 0x07, 660, 0x42, 244,
> > 8,
> > 292 }, +};
> > +
> > +static int cdns_phy_reg_write(struct cdns_hdptx_hdmi_phy *cdns_phy,
> > +u32
> > addr, u32 val) +{
> > + return cdns_mhdp_reg_write(&cdns_phy->base, ADDR_PHY_AFE +
> (addr
> > + <<
> 2),
> > val); +}
> > +
> > +static u32 cdns_phy_reg_read(struct cdns_hdptx_hdmi_phy *cdns_phy,
> > +u32
> > addr) +{
> > + u32 reg32;
> > +
> > + cdns_mhdp_reg_read(&cdns_phy->base, ADDR_PHY_AFE + (addr <<
> 2),
> &reg32);
> > +
> > + return reg32;
> > +}
> > +
> > +static int wait_for_ack(struct cdns_hdptx_hdmi_phy *cdns_phy, u32
> > +reg, u32
> > mask, + const char *err_msg)
> > +{
> > + u32 val, i;
> > +
> > + for (i = 0; i < 10; i++) {
> > + val = cdns_phy_reg_read(cdns_phy, reg);
> > + if (val & mask)
> > + return 0;
> > + msleep(20);
> > + }
> > +
> > + dev_err(cdns_phy->dev, "%s\n", err_msg);
> > + return -1;
>
> return -ETIMEDOUT?

OK.

>
> > +}
> > +
> > +static bool hdptx_phy_check_alive(struct cdns_hdptx_hdmi_phy
> > +*cdns_phy) {
> > + u32 alive, newalive;
> > + u8 retries_left = 50;
> > +
> > + alive = readl(cdns_phy->regs + KEEP_ALIVE);
> > +
> > + while (retries_left--) {
> > + udelay(2);
> > +
> > + newalive = readl(cdns_phy->regs + KEEP_ALIVE);
> > + if (alive == newalive)
> > + continue;
> > + return true;
> > + }
> > + return false;
> > +}
> > +
> > +static int hdptx_hdmi_clk_enable(struct cdns_hdptx_hdmi_phy
> > +*cdns_phy) {
> > + struct device *dev = cdns_phy->dev;
> > + u32 ref_clk_rate;
> > + int ret;
> > +
> > + cdns_phy->ref_clk = devm_clk_get(dev, "ref");
> > + if (IS_ERR(cdns_phy->ref_clk)) {
> > + dev_err(dev, "phy ref clock not found\n");
> > + return PTR_ERR(cdns_phy->ref_clk);
> > + }
> > +
> > + cdns_phy->apb_clk = devm_clk_get(dev, "apb");
> > + if (IS_ERR(cdns_phy->apb_clk)) {
> > + dev_err(dev, "phy apb clock not found\n");
> > + return PTR_ERR(cdns_phy->apb_clk);
> > + }
> > +
> > + ret = clk_prepare_enable(cdns_phy->ref_clk);
> > + if (ret) {
> > + dev_err(cdns_phy->dev, "Failed to prepare ref clock\n");
> > + return ret;
> > + }
> > +
> > + ref_clk_rate = clk_get_rate(cdns_phy->ref_clk);
> > + if (!ref_clk_rate) {
> > + dev_err(cdns_phy->dev, "Failed to get ref clock rate\n");
> > + goto err_ref_clk;
> > + }
> > +
> > + if (ref_clk_rate == REF_CLK_27MHZ) {
> > + cdns_phy->ref_clk_rate = ref_clk_rate;
> > + } else {
> > + dev_err(cdns_phy->dev, "Not support Ref Clock
> Rate(%dHz)
> \n",
> > ref_clk_rate); + goto err_ref_clk;
> > + }
> > +
> > + ret = clk_prepare_enable(cdns_phy->apb_clk);
> > + if (ret) {
> > + dev_err(cdns_phy->dev, "Failed to prepare apb clock\n");
> > + goto err_ref_clk;
> > + }
> > +
> > + return 0;
> > +
> > +err_ref_clk:
> > + clk_disable_unprepare(cdns_phy->ref_clk);
> > + return -EINVAL;
> > +}
> > +
> > +static void hdptx_hdmi_clk_disable(struct cdns_hdptx_hdmi_phy
> > +*cdns_phy) {
> > + clk_disable_unprepare(cdns_phy->ref_clk);
> > + clk_disable_unprepare(cdns_phy->apb_clk);
>
> Shouldn't the clocks be disabled in reverse order to enabling path?

OK, I will change it.

>
> > +}
> > +
> > +static void hdptx_hdmi_arc_config(struct cdns_hdptx_hdmi_phy
> > +*cdns_phy) {
> > + u16 txpu_calib_code;
> > + u16 txpd_calib_code;
> > + u16 txpu_adj_calib_code;
> > + u16 txpd_adj_calib_code;
> > + u16 prev_calib_code;
> > + u16 new_calib_code;
> > + u16 rdata;
> > +
> > + /* Power ARC */
> > + cdns_phy_reg_write(cdns_phy, TXDA_CYA_AUXDA_CYA, 0x0001);
> > +
> > + prev_calib_code = cdns_phy_reg_read(cdns_phy,
> TX_DIG_CTRL_REG_2);
> > + txpu_calib_code = cdns_phy_reg_read(cdns_phy,
> CMN_TXPUCAL_CTRL);
> > + txpd_calib_code = cdns_phy_reg_read(cdns_phy,
> CMN_TXPDCAL_CTRL);
> > + txpu_adj_calib_code = cdns_phy_reg_read(cdns_phy,
> CMN_TXPU_ADJ_CTRL);
> > + txpd_adj_calib_code = cdns_phy_reg_read(cdns_phy,
> CMN_TXPD_ADJ_CTRL);
> > +
> > + new_calib_code = ((txpu_calib_code + txpd_calib_code) / 2)
> > + + txpu_adj_calib_code + txpd_adj_calib_code;
> > +
> > + if (new_calib_code != prev_calib_code) {
> > + rdata = cdns_phy_reg_read(cdns_phy,
> TX_ANA_CTRL_REG_1);
> > + rdata &= 0xdfff;
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_1,
> rdata);
> > + cdns_phy_reg_write(cdns_phy, TX_DIG_CTRL_REG_2,
> new_calib_code);
> > + mdelay(10);
> > + rdata |= 0x2000;
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_1,
> rdata);
> > + usleep_range(150, 250);
> > + }
> > +
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_2, 0x0100);
> > + usleep_range(100, 200);
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_2, 0x0300);
> > + usleep_range(100, 200);
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_3, 0x0000);
> > + usleep_range(100, 200);
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_1, 0x2008);
> > + usleep_range(100, 200);
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_1, 0x2018);
> > + usleep_range(100, 200);
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_1, 0x2098);
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_2, 0x030c);
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_5, 0x0010);
> > + usleep_range(100, 200);
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_4, 0x4001);
> > + mdelay(5);
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_1, 0x2198);
> > + mdelay(5);
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_2, 0x030d);
> > + usleep_range(100, 200);
> > + cdns_phy_reg_write(cdns_phy, TX_ANA_CTRL_REG_2, 0x030f); }
> > +
> > +static void hdptx_hdmi_phy_set_vswing(struct cdns_hdptx_hdmi_phy
> > +*cdns_phy) {
> > + u32 k;
> > + const u32 num_lanes = 4;
> > +
> > + for (k = 0; k < num_lanes; k++) {
> > + cdns_phy_reg_write(cdns_phy, (TX_DIAG_TX_DRV | (k <<
> 9)),
> > +
> TX_DRIVER_PROG_BOOST_ENABLE |
> > +
> FIELD_PREP(TX_DRIVER_PROG_BOOST_LEVEL_MASK, 3) |
> > +
> TX_DRIVER_LDO_BG_DEPENDENT_REF_ENABLE |
> > +
> TX_DRIVER_LDO_BANDGAP_REF_ENABLE);
> > + cdns_phy_reg_write(cdns_phy,
> (TX_TXCC_CPOST_MULT_00_0 |
> > + (k
> << 9)), 0x0);
> > + cdns_phy_reg_write(cdns_phy,
> (TX_TXCC_CAL_SCLR_MULT_0 |
> > + (k
> << 9)),
> > +
> SCALED_RESISTOR_CALIBRATION_CODE_ADD |
> > +
> RESISTOR_CAL_MULT_VAL_32_128);
> > + }
> > +}
> > +
> > +static int hdptx_hdmi_feedback_factor(struct cdns_hdptx_hdmi_phy
> > +*cdns_phy) {
> > + u32 feedback_factor;
> > +
> > + switch (cdns_phy->color_space) {
> > + case HDMI_COLORSPACE_YUV422:
> > + feedback_factor = 1000;
> > + break;
> > +
> > + case HDMI_COLORSPACE_YUV420:
> > + switch (cdns_phy->bpc) {
> > + case 8:
> > + feedback_factor = 500;
> > + break;
> > + case 10:
> > + feedback_factor = 625;
> > + break;
> > + case 12:
> > + feedback_factor = 750;
> > + break;
> > + case 16:
> > + feedback_factor = 1000;
> > + break;
> > + default:
> > + dev_dbg(cdns_phy->dev, "Invalid
> ColorDepth\n");
> > + return 0;
> > + }
> > + break;
> > +
> > + default:
> > + /* Assume RGB/YUV444 */
> > + switch (cdns_phy->bpc) {
> > + case 10:
> > + feedback_factor = 1250;
> > + break;
> > + case 12:
> > + feedback_factor = 1500;
> > + break;
> > + case 16:
> > + feedback_factor = 2000;
> > + break;
> > + default:
> > + feedback_factor = 1000;
> > + }
> > + }
> > +
> > + return feedback_factor;
> > +}
> > +
> > +static int hdptx_hdmi_phy_config(struct cdns_hdptx_hdmi_phy *cdns_phy,
> > + const struct hdptx_hdmi_ctrl
> *p_ctrl_table,
> > + const struct hdptx_hdmi_pll_tuning
> *p_pll_table,
> > + char pclk_in)
>
> bool pclk_in

OK.

>
> > +{
> > + const u32 num_lanes = 4;
> > + u32 val, k;
> > +
> > + /* enable PHY isolation mode only for CMN */
> > + cdns_phy_reg_write(cdns_phy, PHY_PMA_ISOLATION_CTRL,
> 0xd000);
> > +
> > + /* set cmn_pll0_clk_datart1_div/cmn_pll0_clk_datart0_div dividers
> */
> > + val = cdns_phy_reg_read(cdns_phy, PHY_PMA_ISO_PLL_CTRL1);
> > + val &= ~CMN_PLL0_CLK_DATART_DIV_MASK;
> > + val |= FIELD_PREP(CMN_PLL0_CLK_DATART_DIV_MASK, 0x12);
> > + cdns_phy_reg_write(cdns_phy, PHY_PMA_ISO_PLL_CTRL1, val);
> > +
> > + /* assert PHY reset from isolation register */
> > + cdns_phy_reg_write(cdns_phy, PHY_ISO_CMN_CTRL, 0x0000);
> > + /* assert PMA CMN reset */
> > + cdns_phy_reg_write(cdns_phy, PHY_PMA_ISO_CMN_CTRL,
> 0x0000);
> > +
> > + /* register XCVR_DIAG_BIDI_CTRL */
> > + for (k = 0; k < num_lanes; k++)
> > + cdns_phy_reg_write(cdns_phy, XCVR_DIAG_BIDI_CTRL |
> (k <<
> 9), 0x00ff);
> > +
> > + /* Describing Task phy_cfg_hdp */
> > + val = cdns_phy_reg_read(cdns_phy, PHY_PMA_CMN_CTRL1);
> > + val &= ~CMA_REF_CLK_RCV_EN_MASK;
> > + val |= FIELD_PREP(CMA_REF_CLK_RCV_EN_MASK,
> CMA_REF_CLK_RCV_EN);
> > + cdns_phy_reg_write(cdns_phy, PHY_PMA_CMN_CTRL1, val);
> > +
> > + /* PHY Registers */
> > + val = cdns_phy_reg_read(cdns_phy, PHY_PMA_CMN_CTRL1);
> > + val &= ~CMA_REF_CLK_DIG_DIV_MASK;
> > + val |= FIELD_PREP(CMA_REF_CLK_DIG_DIV_MASK,
> > p_ctrl_table->cmn_ref_clk_dig_div); + cdns_phy_reg_write(cdns_phy,
> > PHY_PMA_CMN_CTRL1, val);
> > +
> > + val = cdns_phy_reg_read(cdns_phy, PHY_HDP_CLK_CTL);
> > + val &= ~PLL_DATA_RATE_CLK_DIV_MASK;
> > + val |= FIELD_PREP(PLL_DATA_RATE_CLK_DIV_MASK,
> > + PLL_DATA_RATE_CLK_DIV_HBR2);
> > + cdns_phy_reg_write(cdns_phy, PHY_HDP_CLK_CTL, val);
> > +
> > + /* Common control module control and diagnostic registers */
> > + val = cdns_phy_reg_read(cdns_phy, CMN_CDIAG_REFCLK_CTRL);
> > + val &= ~DIG_REF_CLK_DIV_SCALER_MASK;
> > + val |= FIELD_PREP(DIG_REF_CLK_DIV_SCALER_MASK,
> > p_ctrl_table->ref_clk_divider_scaler); + val |=
> > REFCLK_TERMINATION_EN_OVERRIDE_EN |
> REFCLK_TERMINATION_EN_OVERRIDE;
> > + cdns_phy_reg_write(cdns_phy, CMN_CDIAG_REFCLK_CTRL, val);
> > +
> > + /* High speed clock used */
> > + val = cdns_phy_reg_read(cdns_phy, CMN_DIAG_HSCLK_SEL);
> > + val &= ~(HSCLK1_SEL_MASK | HSCLK0_SEL_MASK);
> > + val |= FIELD_PREP(HSCLK1_SEL_MASK,
> > + (p_ctrl_table->cmnda_hs_clk_1_sel
> >>
> > 1)); + val |= FIELD_PREP(HSCLK0_SEL_MASK,
> (p_ctrl_table->cmnda_hs_clk_0_sel
> > >> 1)); + cdns_phy_reg_write(cdns_phy, CMN_DIAG_HSCLK_SEL, val);
> > +
> > + for (k = 0; k < num_lanes; k++) {
> > + val = cdns_phy_reg_read(cdns_phy,
> (XCVR_DIAG_HSCLK_SEL |
> (k << 9)));
> > + val &= ~HSCLK_SEL_MODE3_MASK;
> > + val |= FIELD_PREP(HSCLK_SEL_MODE3_MASK,
> > +
> (p_ctrl_table->cmnda_hs_clk_0_sel >>
> 1));
> > + cdns_phy_reg_write(cdns_phy, (XCVR_DIAG_HSCLK_SEL |
> (k
> > + <<
> 9)), val);
> > + }
> > +
> > + /* PLL 0 control state machine registers */
> > + val = p_ctrl_table->vco_ring_select << 12;
> > + cdns_phy_reg_write(cdns_phy, CMN_PLLSM0_USER_DEF_CTRL,
> val);
> > +
> > + if (pclk_in) {
> > + val = 0x30a0;
> > + } else {
> > + val = cdns_phy_reg_read(cdns_phy,
> CMN_PLL0_VCOCAL_START);
> > + val &= ~VCO_CALIB_CODE_START_POINT_VAL_MASK;
> > + val |=
> FIELD_PREP(VCO_CALIB_CODE_START_POINT_VAL_MASK,
> > + p_pll_table->vco_cal_code);
> > + }
> > + cdns_phy_reg_write(cdns_phy, CMN_PLL0_VCOCAL_START, val);
> > +
> > + cdns_phy_reg_write(cdns_phy, CMN_PLL0_VCOCAL_INIT_TMR,
> 0x0064);
> > + cdns_phy_reg_write(cdns_phy, CMN_PLL0_VCOCAL_ITER_TMR,
> 0x000a);
> > +
> > + /* Common functions control and diagnostics registers */
> > + val = p_ctrl_table->cmnda_pll0_hs_sym_div_sel << 8;
> > + val |= p_ctrl_table->cmnda_pll0_ip_div;
> > + cdns_phy_reg_write(cdns_phy, CMN_DIAG_PLL0_INCLK_CTRL, val);
> > +
> > + cdns_phy_reg_write(cdns_phy, CMN_DIAG_PLL0_OVRD, 0x0000);
> > +
> > + val = p_ctrl_table->cmnda_pll0_fb_div_high;
> > + val |= PLL_FEEDBACK_DIV_HI_OVERRIDE_EN;
> > + cdns_phy_reg_write(cdns_phy, CMN_DIAG_PLL0_FBH_OVRD, val);
> > +
> > + val = p_ctrl_table->cmnda_pll0_fb_div_low;
> > + val |= PLL_FEEDBACK_DIV_LO_OVERRIDE_EN;
> > + cdns_phy_reg_write(cdns_phy, CMN_DIAG_PLL0_FBL_OVRD, val);
> > +
> > + if (!pclk_in) {
> > + val = p_ctrl_table->cmnda_pll0_pxdiv_low;
> > + cdns_phy_reg_write(cdns_phy,
> CMN_DIAG_PLL0_PXL_DIVL,
> > + val);
> > +
> > + val = p_ctrl_table->cmnda_pll0_pxdiv_high;
> > + val |= PLL_PCLK_DIV_EN;
> > + cdns_phy_reg_write(cdns_phy,
> CMN_DIAG_PLL0_PXL_DIVH, val);
> > + }
> > +
> > + val = p_pll_table->volt_to_current_coarse;
> > + val |= (p_pll_table->volt_to_current) << 4;
> > + cdns_phy_reg_write(cdns_phy, CMN_DIAG_PLL0_V2I_TUNE, val);
> > +
> > + val = p_pll_table->charge_pump_gain;
> > + cdns_phy_reg_write(cdns_phy, CMN_DIAG_PLL0_CP_TUNE, val);
> > +
> > + cdns_phy_reg_write(cdns_phy, CMN_DIAG_PLL0_LF_PROG,
> 0x0008);
> > +
> > + val = p_pll_table->pmos_ctrl;
> > + val |= (p_pll_table->ndac_ctrl) << 8;
> > + cdns_phy_reg_write(cdns_phy, CMN_DIAG_PLL0_PTATIS_TUNE1,
> val);
> > +
> > + val = p_pll_table->ptat_ndac_ctrl;
> > + cdns_phy_reg_write(cdns_phy, CMN_DIAG_PLL0_PTATIS_TUNE2,
> val);
> > +
> > + if (pclk_in)
> > + cdns_phy_reg_write(cdns_phy,
> CMN_DIAG_PLL0_TEST_MODE,
> 0x0022);
> > + else
> > + cdns_phy_reg_write(cdns_phy,
> CMN_DIAG_PLL0_TEST_MODE,
> 0x0020);
> > +
> > + cdns_phy_reg_write(cdns_phy, CMN_PSM_CLK_CTRL, 0x0016);
> > +
> > + /* Transceiver control and diagnostic registers */
> > + for (k = 0; k < num_lanes; k++) {
> > + val = cdns_phy_reg_read(cdns_phy,
> (XCVR_DIAG_PLLDRC_CTRL
> > + |
> (k << 9)));
> > + val &= ~DPLL_CLK_SEL_MODE3;
> > + cdns_phy_reg_write(cdns_phy,
> (XCVR_DIAG_PLLDRC_CTRL | (k
> << 9)), val);
> > + }
> > +
> > + for (k = 0; k < num_lanes; k++) {
> > + val = cdns_phy_reg_read(cdns_phy, (TX_DIAG_TX_CTRL |
> (k
> > + <<
> 9)));
> > + val &= ~TX_IF_SUBRATE_MODE3_MASK;
> > + val |= FIELD_PREP(TX_IF_SUBRATE_MODE3_MASK,
> > +
> (p_ctrl_table->hsclk_div_tx_sub_rate
> >> 1));
> > + cdns_phy_reg_write(cdns_phy, (TX_DIAG_TX_CTRL | (k <<
> > + 9)),
> val);
> > + }
> > +
> > + val = cdns_phy_reg_read(cdns_phy, PHY_PMA_CMN_CTRL1);
> > + val &= ~CMA_REF_CLK_SEL_MASK;
> > + /*
> > + * single ended reference clock (val |= 0x0030);
> > + * differential clock (val |= 0x0000);
> > + * for differential clock on the refclk_p and
> > + * refclk_m off chip pins: CMN_DIAG_ACYA[8]=1'b1
> > + * cdns_phy_reg_write(cdns_phy, CMN_DIAG_ACYA, 0x0100);
> > + */
> > + val |= FIELD_PREP(CMA_REF_CLK_SEL_MASK, 3);
> > + cdns_phy_reg_write(cdns_phy, PHY_PMA_CMN_CTRL1, val);
> > +
> > + /* Deassert PHY reset */
> > + cdns_phy_reg_write(cdns_phy, PHY_ISO_CMN_CTRL, 0x0001);
> > + cdns_phy_reg_write(cdns_phy, PHY_PMA_ISO_CMN_CTRL,
> 0x0003);
> > +
> > + /* Power state machine registers */
> > + for (k = 0; k < num_lanes; k++)
> > + cdns_phy_reg_write(cdns_phy, XCVR_PSM_RCTRL | (k <<
> 9),
> 0xfefc);
> > +
> > + /* Assert cmn_macro_pwr_en */
> > + cdns_phy_reg_write(cdns_phy, PHY_PMA_ISO_CMN_CTRL,
> 0x0013);
> > +
> > + /* wait for cmn_macro_pwr_en_ack */
> > + if (wait_for_ack(cdns_phy, PHY_PMA_ISO_CMN_CTRL,
> CMN_MACRO_PWR_EN_ACK,
> > + "MA output macro power up failed"))
> > + return -1;
>
> Return the error value of wait_for_ack.

OK.

>
> > + /* wait for cmn_ready */
> > + if (wait_for_ack(cdns_phy, PHY_PMA_CMN_CTRL1, CMN_READY,
> > + "PMA output ready failed"))
> > + return -1;
>
> Return the error value of wait_for_ack.

OK.

>
> > + for (k = 0; k < num_lanes; k++) {
> > + cdns_phy_reg_write(cdns_phy, TX_PSC_A0 | (k << 9),
> 0x6791);
> > + cdns_phy_reg_write(cdns_phy, TX_PSC_A1 | (k << 9),
> 0x6790);
> > + cdns_phy_reg_write(cdns_phy, TX_PSC_A2 | (k << 9),
> 0x0090);
> > + cdns_phy_reg_write(cdns_phy, TX_PSC_A3 | (k << 9),
> 0x0090);
> > +
> > + val = cdns_phy_reg_read(cdns_phy, RX_PSC_CAL | (k <<
> 9));
> > + val &= 0xffbb;
> > + cdns_phy_reg_write(cdns_phy, RX_PSC_CAL | (k << 9),
> > + val);
> > +
> > + val = cdns_phy_reg_read(cdns_phy, RX_PSC_A0 | (k << 9));
> > + val &= 0xffbb;
> > + cdns_phy_reg_write(cdns_phy, RX_PSC_A0 | (k << 9), val);
> > + }
> > + return 0;
> > +}
> > +
> > +static int hdptx_hdmi_phy_cfg(struct cdns_hdptx_hdmi_phy *cdns_phy,
> > +u32
> > rate) +{
> > + const struct hdptx_hdmi_ctrl *p_ctrl_table;
> > + const struct hdptx_hdmi_pll_tuning *p_pll_table;
> > + const u32 refclk_freq_khz = cdns_phy->ref_clk_rate / 1000;
> > + const u8 pclk_in = false;
>
> const bool pclk_in = false;

OK.

>
> > + u32 pixel_freq = rate;
> > + u32 vco_freq, char_freq;
> > + u32 div_total, feedback_factor;
> > + u32 i, ret;
> > +
> > + feedback_factor = hdptx_hdmi_feedback_factor(cdns_phy);
> > +
> > + char_freq = pixel_freq * feedback_factor / 1000;
> > +
> > + dev_dbg(cdns_phy->dev,
> > + "Pixel clock: (%d KHz), character clock: %d, bpc is
> > + (%0d-
> bit)\n",
> > + pixel_freq, char_freq, cdns_phy->bpc);
> > +
> > + /* Get right row from the ctrl_table table.
> > + * Check if 'pixel_freq_khz' value matches the PIXEL_CLK_FREQ
> column.
> > + * Consider only the rows with FEEDBACK_FACTOR column matching
> > feedback_factor. + */
> > + for (i = 0; i < ARRAY_SIZE(pixel_clk_output_ctrl_table); i++) {
> > + if (feedback_factor ==
> pixel_clk_output_ctrl_table[i].feedback_factor &&
> > + pixel_freq ==
> pixel_clk_output_ctrl_table[i].pixel_clk_freq_min) {
> > + p_ctrl_table = &pixel_clk_output_ctrl_table[i];
> > + break;
> > + }
> > + }
> > + if (i == ARRAY_SIZE(pixel_clk_output_ctrl_table)) {
> > + dev_warn(cdns_phy->dev,
> > + "Pixel clk (%d KHz) not supported, bpc is (%0d-
> bit)\n",
> > + pixel_freq, cdns_phy->bpc);
> > + return 0;
>
> Returning 0 doesn't seem correct. The caller checks for small than 0. I suggest
> returning 0 if configuration was successful, and some error code otherwise.

OK, it should be change to return error code.

>
> > + }
> > +
> > + div_total = p_ctrl_table->pll_fb_div_total;
> > + vco_freq = refclk_freq_khz * div_total / p_ctrl_table-
> >cmnda_pll0_ip_div;
> > +
> > + /* Get right row from the pixel_clk_output_pll_table table.
> > + * Check if vco_freq_khz and feedback_div_total
> > + * column matching with pixel_clk_output_pll_table.
> > + */
> > + for (i = 0; i < ARRAY_SIZE(pixel_clk_output_pll_table); i++) {
> > + if (vco_freq ==
> > + pixel_clk_output_pll_table[i].vco_freq_min
> &&
> > + div_total ==
> pixel_clk_output_pll_table[i].feedback_div_total) {
> > + p_pll_table = &pixel_clk_output_pll_table[i];
> > + break;
> > + }
> > + }
> > + if (i == ARRAY_SIZE(pixel_clk_output_pll_table)) {
> > + dev_warn(cdns_phy->dev, "VCO (%d KHz) not
> supported\n",
> vco_freq);
> > + return -1;
>
> return -EINVAL?

OK.

>
> > + }
> > + dev_dbg(cdns_phy->dev, "VCO frequency is (%d KHz)\n", vco_freq);
> > +
> > + ret = hdptx_hdmi_phy_config(cdns_phy, p_ctrl_table, p_pll_table,
> pclk_in);
> > + if (ret < 0)
> > + return ret;
> > +
> > + return char_freq;
>
> See above. There is no need to return the character clock here.

OK.

>
> > +}
> > +
> > +static int hdptx_hdmi_phy_power_up(struct cdns_hdptx_hdmi_phy
> > +*cdns_phy) {
> > + /* set Power State to A2 */
> > + cdns_phy_reg_write(cdns_phy, PHY_HDP_MODE_CTRL,
> POWER_STATE_A2);
> > +
> > + cdns_phy_reg_write(cdns_phy, TX_DIAG_ACYA_0, 1);
> > + cdns_phy_reg_write(cdns_phy, TX_DIAG_ACYA_1, 1);
> > + cdns_phy_reg_write(cdns_phy, TX_DIAG_ACYA_2, 1);
> > + cdns_phy_reg_write(cdns_phy, TX_DIAG_ACYA_3, 1);
> > +
> > + if (wait_for_ack(cdns_phy, PHY_HDP_MODE_CTRL,
> POWER_STATE_A2_ACK,
> > + "Wait A2 Ack failed"))
> > + return -1;
>
> Return the error value of wait_for_ack.

OK.

>
> > +
> > + /* Power up ARC */
> > + hdptx_hdmi_arc_config(cdns_phy);
> > +
> > + /* Configure PHY in A0 mode (PHY must be in the A0 power
> > + * state in order to transmit data)
> > + */
> > + cdns_phy_reg_write(cdns_phy, PHY_HDP_MODE_CTRL,
> POWER_STATE_A0);
> > + if (wait_for_ack(cdns_phy, PHY_HDP_MODE_CTRL,
> POWER_STATE_A0_ACK,
> > + "Wait A0 Ack failed"))
> > + return -1;
>
> Return the error value of wait_for_ack.

OK.

>
> > +
> > + return 0;
> > +}
> > +
> > +static int hdptx_hdmi_phy_power_down(struct cdns_hdptx_hdmi_phy
> > +*cdns_phy) {
> > + u32 val;
> > +
> > + val = cdns_phy_reg_read(cdns_phy, PHY_HDP_MODE_CTRL);
> > + val &= ~(POWER_STATE_A0 | POWER_STATE_A1 |
> POWER_STATE_A2 |
> > POWER_STATE_A3); + /* PHY_DP_MODE_CTL set to A3 power state */
> > + cdns_phy_reg_write(cdns_phy, PHY_HDP_MODE_CTRL, val |
> POWER_STATE_A3);
> > +
> > + if (wait_for_ack(cdns_phy, PHY_HDP_MODE_CTRL,
> POWER_STATE_A3_ACK,
> > + "Wait A3 Ack failed"))
> > + return -1;
>
> Return the error value of wait_for_ack.

OK.

>
> > +
> > + return 0;
> > +}
> > +
> > +static int cdns_hdptx_hdmi_phy_on(struct phy *phy) {
> > + struct cdns_hdptx_hdmi_phy *cdns_phy = phy_get_drvdata(phy);
> > +
> > + return hdptx_hdmi_phy_power_up(cdns_phy);
> > +}
> > +
> > +static int cdns_hdptx_hdmi_phy_off(struct phy *phy) {
> > + struct cdns_hdptx_hdmi_phy *cdns_phy = phy_get_drvdata(phy);
> > +
> > + hdptx_hdmi_phy_power_down(cdns_phy);
> > + return 0;
> > +}
> > +
> > +int cdns_hdptx_hdmi_phy_valid(struct phy *phy, enum phy_mode mode,
> > +int
> > submode, + union phy_configure_opts
> *opts)
> > +{
> > + u32 rate = opts->hdmi.pixel_clk_rate;
> > + int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(pixel_clk_output_ctrl_table); i++)
> > + if (rate ==
> pixel_clk_output_ctrl_table[i].pixel_clk_freq_min)
> > + return 0;
> > +
> > + return -EINVAL;
> > +}
> > +
> > +static int cdns_hdptx_hdmi_phy_init(struct phy *phy) {
> > + return 0;
> > +}
> > +
> > +static int cdns_hdptx_hdmi_configure(struct phy *phy,
> > + union phy_configure_opts *opts)
> {
> > + struct cdns_hdptx_hdmi_phy *cdns_phy = phy_get_drvdata(phy);
> > + int ret;
> > +
> > + cdns_phy->pixel_clk_rate = opts->hdmi.pixel_clk_rate;
> > + cdns_phy->color_space = opts->hdmi.color_space;
> > + cdns_phy->bpc = opts->hdmi.bpc;
> > +
> > + /* Check HDMI FW alive before HDMI PHY init */
> > + ret = hdptx_phy_check_alive(cdns_phy);
> > + if (!ret) {
> > + dev_err(cdns_phy->dev, "NO HDMI FW running\n");
> > + return -ENXIO;
> > + }
> > +
> > + /* Configure PHY */
> > + if (hdptx_hdmi_phy_cfg(cdns_phy, cdns_phy->pixel_clk_rate) < 0) {
> > + dev_err(cdns_phy->dev, "failed to set phy pclock\n");
> > + return -EINVAL;
> > + }
> > +
> > + ret = hdptx_hdmi_phy_power_up(cdns_phy);
> > + if (ret < 0)
> > + return ret;
> > +
> > + hdptx_hdmi_phy_set_vswing(cdns_phy);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct phy_ops cdns_hdptx_hdmi_phy_ops = {
> > + .init = cdns_hdptx_hdmi_phy_init,
> > + .configure = cdns_hdptx_hdmi_configure,
> > + .power_on = cdns_hdptx_hdmi_phy_on,
> > + .power_off = cdns_hdptx_hdmi_phy_off,
> > + .validate = cdns_hdptx_hdmi_phy_valid,
> > + .owner = THIS_MODULE,
> > +};
> > +
> > +static int cdns_hdptx_hdmi_phy_probe(struct platform_device *pdev) {
> > + struct cdns_hdptx_hdmi_phy *cdns_phy;
> > + struct device *dev = &pdev->dev;
> > + struct device_node *node = dev->of_node;
> > + struct phy_provider *phy_provider;
> > + struct resource *res;
> > + struct phy *phy;
> > + int ret;
> > +
> > + cdns_phy = devm_kzalloc(dev, sizeof(*cdns_phy), GFP_KERNEL);
> > + if (!cdns_phy)
> > + return -ENOMEM;
> > +
> > + dev_set_drvdata(dev, cdns_phy);
> > + cdns_phy->dev = dev;
> > + mutex_init(&cdns_phy->mbox_mutex);
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + if (!res)
> > + return -ENODEV;
> > + cdns_phy->regs = devm_ioremap(dev, res->start,
> resource_size(res));
> > + if (IS_ERR(cdns_phy->regs))
> > + return PTR_ERR(cdns_phy->regs);
> > +
> > + phy = devm_phy_create(dev, node, &cdns_hdptx_hdmi_phy_ops);
> > + if (IS_ERR(phy))
> > + return PTR_ERR(phy);
> > +
> > + phy->attrs.mode = PHY_MODE_HDMI;
> > +
> > + cdns_phy->phy = phy;
> > + phy_set_drvdata(phy, cdns_phy);
> > +
> > + /* init base struct for access mhdp mailbox */
> > + cdns_phy->base.dev = cdns_phy->dev;
> > + cdns_phy->base.regs = cdns_phy->regs;
> > + cdns_phy->base.mbox_mutex = &cdns_phy->mbox_mutex;
>
> The same as for the DP PHY driver applies here.

Same as reply in DP PHY driver.

Best, regards,
Sandor

>
> Best regards,
> Alexander
>
> > +
> > + ret = hdptx_hdmi_clk_enable(cdns_phy);
> > + if (ret) {
> > + dev_err(dev, "Init clk fail\n");
> > + return -EINVAL;
> > + }
> > +
> > + phy_provider = devm_of_phy_provider_register(dev,
> of_phy_simple_xlate);
> > + if (IS_ERR(phy_provider)) {
> > + ret = PTR_ERR(phy_provider);
> > + goto clk_disable;
> > + }
> > +
> > + dev_dbg(dev, "probe success!\n");
> > +
> > + return 0;
> > +
> > +clk_disable:
> > + hdptx_hdmi_clk_disable(cdns_phy);
> > +
> > + return -EINVAL;
> > +}
> > +
> > +static int cdns_hdptx_hdmi_phy_remove(struct platform_device *pdev) {
> > + struct cdns_hdptx_hdmi_phy *cdns_phy =
> > +platform_get_drvdata(pdev);
> > +
> > + hdptx_hdmi_clk_disable(cdns_phy);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id cdns_hdptx_hdmi_phy_of_match[] = {
> > + {.compatible = "fsl,imx8mq-hdmi-phy" },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, cdns_hdptx_hdmi_phy_of_match);
> > +
> > +static struct platform_driver cdns_hdptx_hdmi_phy_driver = {
> > + .probe = cdns_hdptx_hdmi_phy_probe,
> > + .remove = cdns_hdptx_hdmi_phy_remove,
> > + .driver = {
> > + .name = "cdns-hdptx-hdmi-phy",
> > + .of_match_table = cdns_hdptx_hdmi_phy_of_match,
> > + }
> > +};
> > +module_platform_driver(cdns_hdptx_hdmi_phy_driver);
> > +
> > +MODULE_AUTHOR("Sandor Yu <sandor.yu@xxxxxxx>");
> > +MODULE_DESCRIPTION("Cadence HDP-TX HDMI PHY driver");
> > +MODULE_LICENSE("GPL");
>
>
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> http://www.tq/
> -group.com%2F&data=05%7C01%7CSandor.yu%40nxp.com%7C2d4ab7c82e4
> 94769e63a08dbcf135a98%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7
> C0%7C638331454264512557%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4
> wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%
> 7C%7C%7C&sdata=b%2F%2Fv3Wbo7ZRfDWR3bau%2BDrSQu3XiCpW7r12ZG
> T5l1hQ%3D&reserved=0
>

Next message: Kai-Heng Feng: "Re: [Regression] [PCI/ASPM] [ASUS PN51] Reboot on resume attempt (bisect done; commit found)"
Previous message: Sandor Yu: "RE: [EXT] Re: [PATCH v11 6/7] phy: freescale: Add DisplayPort PHY driver for i.MX8MQ"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]