[PATCH 2/8] ARC: Fix typos

From: Bjorn Helgaas
Date: Wed Jan 03 2024 - 18:16:48 EST

Next message: Bjorn Helgaas: "[PATCH 3/8] arm64: Fix typos"
Previous message: Bjorn Helgaas: "[PATCH 1/8] alpha: Fix typos"
In reply to: Randy Dunlap: "Re: [PATCH 1/8] alpha: Fix typos"
Next in thread: Randy Dunlap: "Re: [PATCH 2/8] ARC: Fix typos"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>

Fix typos, most reported by "codespell arch/arc". Only touches comments,
no code changes.

Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Cc: linux-snps-arc@xxxxxxxxxxxxxxxxxxx
---
arch/arc/boot/Makefile | 4 ++--
arch/arc/boot/dts/axc003.dtsi | 4 ++--
arch/arc/boot/dts/vdk_axs10x_mb.dtsi | 2 +-
arch/arc/include/asm/dsp.h | 2 +-
arch/arc/include/asm/entry-compact.h | 10 +++++-----
arch/arc/include/asm/entry.h | 4 ++--
arch/arc/include/asm/irq.h | 2 +-
arch/arc/include/asm/irqflags-compact.h | 2 +-
arch/arc/include/asm/mmu_context.h | 2 +-
arch/arc/include/asm/pgtable-bits-arcv2.h | 2 +-
arch/arc/include/asm/shmparam.h | 2 +-
arch/arc/include/asm/smp.h | 4 ++--
arch/arc/include/asm/thread_info.h | 2 +-
arch/arc/include/uapi/asm/swab.h | 2 +-
arch/arc/kernel/entry-arcv2.S | 8 ++++----
arch/arc/kernel/entry.S | 4 ++--
arch/arc/kernel/head.S | 2 +-
arch/arc/kernel/intc-arcv2.c | 2 +-
arch/arc/kernel/perf_event.c | 2 +-
arch/arc/kernel/setup.c | 2 +-
arch/arc/kernel/signal.c | 2 +-
arch/arc/kernel/traps.c | 2 +-
arch/arc/kernel/vmlinux.lds.S | 4 ++--
arch/arc/mm/tlbex.S | 8 ++++----
24 files changed, 40 insertions(+), 40 deletions(-)

diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile
index 5648748c285f..5a8550124b73 100644
--- a/arch/arc/boot/Makefile
+++ b/arch/arc/boot/Makefile
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: GPL-2.0

-# uImage build relies on mkimage being availble on your host for ARC target
+# uImage build relies on mkimage being available on your host for ARC target
# You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
-# and make sure it's reacable from your PATH
+# and make sure it's reachable from your PATH

OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S

diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index 3434c8131ecd..c0a812674ce9 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -119,9 +119,9 @@ mmc@15000 {
/*
* The DW APB ICTL intc on MB is connected to CPU intc via a
* DT "invisible" DW APB GPIO block, configured to simply pass thru
- * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c)
+ * interrupts - setup accordingly in platform init (plat-axs10x/ax10x.c)
*
- * So here we mimic a direct connection betwen them, ignoring the
+ * So here we mimic a direct connection between them, ignoring the
* ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core)
* instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO)
*
diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index 90a412026e64..0e0e2d337bf8 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -113,7 +113,7 @@ mmc@15000 {
/*
* Embedded Vision subsystem UIO mappings; only relevant for EV VDK
*
- * This node is intentionally put outside of MB above becase
+ * This node is intentionally put outside of MB above because
* it maps areas outside of MB's 0xez-0xfz.
*/
uio_ev: uio@d0000000 {
diff --git a/arch/arc/include/asm/dsp.h b/arch/arc/include/asm/dsp.h
index 202c78e56704..f496dbc4640b 100644
--- a/arch/arc/include/asm/dsp.h
+++ b/arch/arc/include/asm/dsp.h
@@ -12,7 +12,7 @@
/*
* DSP-related saved registers - need to be saved only when you are
* scheduled out.
- * structure fields name must correspond to aux register defenitions for
+ * structure fields name must correspond to aux register definitions for
* automatic offset calculation in DSP_AUX_SAVE_RESTORE macros
*/
struct dsp_callee_regs {
diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h
index a0e760eb35a8..4b8502df31d9 100644
--- a/arch/arc/include/asm/entry-compact.h
+++ b/arch/arc/include/asm/entry-compact.h
@@ -7,7 +7,7 @@
* Stack switching code can no longer reliably rely on the fact that
* if we are NOT in user mode, stack is switched to kernel mode.
* e.g. L2 IRQ interrupted a L1 ISR which had not yet completed
- * it's prologue including stack switching from user mode
+ * its prologue including stack switching from user mode
*
* Vineetg: Aug 28th 2008: Bug #94984
* -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap
@@ -58,7 +58,7 @@
* 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode)
* 3. But before it could switch SP from USER to KERNEL stack
* a L2 IRQ "Interrupts" L1
- * Thay way although L2 IRQ happened in Kernel mode, stack is still
+ * That way although L2 IRQ happened in Kernel mode, stack is still
* not switched.
* To handle this, we may need to switch stack even if in kernel mode
* provided SP has values in range of USER mode stack ( < 0x7000_0000 )
@@ -88,7 +88,7 @@

GET_CURR_TASK_ON_CPU r9

- /* With current tsk in r9, get it's kernel mode stack base */
+ /* With current tsk in r9, get its kernel mode stack base */
GET_TSK_STACK_BASE r9, r9

/* save U mode SP @ pt_regs->sp */
@@ -197,7 +197,7 @@
* NOTE:
*
* It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
- * for memory load operations. If used in that way interrupts are deffered
+ * for memory load operations. If used in that way interrupts are deferred
* by hardware and that is not good.
*-------------------------------------------------------------*/
.macro EXCEPTION_EPILOGUE
@@ -265,7 +265,7 @@
* NOTE:
*
* It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
- * for memory load operations. If used in that way interrupts are deffered
+ * for memory load operations. If used in that way interrupts are deferred
* by hardware and that is not good.
*-------------------------------------------------------------*/
.macro INTERRUPT_EPILOGUE LVL
diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h
index 49c2e090cb5c..4bcb64dbcc8f 100644
--- a/arch/arc/include/asm/entry.h
+++ b/arch/arc/include/asm/entry.h
@@ -7,7 +7,7 @@
#ifndef __ASM_ARC_ENTRY_H
#define __ASM_ARC_ENTRY_H

-#include <asm/unistd.h> /* For NR_syscalls defination */
+#include <asm/unistd.h> /* For NR_syscalls definition */
#include <asm/arcregs.h>
#include <asm/ptrace.h>
#include <asm/processor.h> /* For VMALLOC_START */
@@ -158,7 +158,7 @@
.endm

/*-------------------------------------------------------------
- * given a tsk struct, get to the base of it's kernel mode stack
+ * given a tsk struct, get to the base of its kernel mode stack
* tsk->thread_info is really a PAGE, whose bottom hoists stack
* which grows upwards towards thread_info
*------------------------------------------------------------*/
diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h
index c574712ad865..9cd79263acba 100644
--- a/arch/arc/include/asm/irq.h
+++ b/arch/arc/include/asm/irq.h
@@ -10,7 +10,7 @@
* ARCv2 can support 240 interrupts in the core interrupts controllers and
* 128 interrupts in IDU. Thus 512 virtual IRQs must be enough for most
* configurations of boards.
- * This doesnt affect ARCompact, but we change it to same value
+ * This doesn't affect ARCompact, but we change it to same value
*/
#define NR_IRQS 512

diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h
index 0d63e568d64c..936a2f21f315 100644
--- a/arch/arc/include/asm/irqflags-compact.h
+++ b/arch/arc/include/asm/irqflags-compact.h
@@ -46,7 +46,7 @@
* IRQ Control Macros
*
* All of them have "memory" clobber (compiler barrier) which is needed to
- * ensure that LD/ST requiring irq safetly (R-M-W when LLSC is not available)
+ * ensure that LD/ST requiring irq safety (R-M-W when LLSC is not available)
* are redone after IRQs are re-enabled (and gcc doesn't reuse stale register)
*
* Noted at the time of Abilis Timer List corruption
diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h
index dda471f5f05b..9963bb1a5733 100644
--- a/arch/arc/include/asm/mmu_context.h
+++ b/arch/arc/include/asm/mmu_context.h
@@ -165,7 +165,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
* for retiring-mm. However destroy_context( ) still needs to do that because
* between mm_release( ) = >deactive_mm( ) and
* mmput => .. => __mmdrop( ) => destroy_context( )
- * there is a good chance that task gets sched-out/in, making it's ASID valid
+ * there is a good chance that task gets sched-out/in, making its ASID valid
* again (this teased me for a whole day).
*/

diff --git a/arch/arc/include/asm/pgtable-bits-arcv2.h b/arch/arc/include/asm/pgtable-bits-arcv2.h
index f3eea3f30b2e..f8f85c04d7a8 100644
--- a/arch/arc/include/asm/pgtable-bits-arcv2.h
+++ b/arch/arc/include/asm/pgtable-bits-arcv2.h
@@ -66,7 +66,7 @@
* Other rules which cause the divergence from 1:1 mapping
*
* 1. Although ARC700 can do exclusive execute/write protection (meaning R
- * can be tracked independet of X/W unlike some other CPUs), still to
+ * can be tracked independent of X/W unlike some other CPUs), still to
* keep things consistent with other archs:
* -Write implies Read: W => R
* -Execute implies Read: X => R
diff --git a/arch/arc/include/asm/shmparam.h b/arch/arc/include/asm/shmparam.h
index 8b0251464ffd..719112af0f41 100644
--- a/arch/arc/include/asm/shmparam.h
+++ b/arch/arc/include/asm/shmparam.h
@@ -6,7 +6,7 @@
#ifndef __ARC_ASM_SHMPARAM_H
#define __ARC_ASM_SHMPARAM_H

-/* Handle upto 2 cache bins */
+/* Handle up to 2 cache bins */
#define SHMLBA (2 * PAGE_SIZE)

/* Enforce SHMLBA in shmat */
diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h
index e0913f52c2cd..990f834909f0 100644
--- a/arch/arc/include/asm/smp.h
+++ b/arch/arc/include/asm/smp.h
@@ -77,7 +77,7 @@ static inline const char *arc_platform_smp_cpuinfo(void)

/*
* ARC700 doesn't support atomic Read-Modify-Write ops.
- * Originally Interrupts had to be disabled around code to gaurantee atomicity.
+ * Originally Interrupts had to be disabled around code to guarantee atomicity.
* The LLOCK/SCOND insns allow writing interrupt-hassle-free based atomic ops
* based on retry-if-irq-in-atomic (with hardware assist).
* However despite these, we provide the IRQ disabling variant
@@ -86,7 +86,7 @@ static inline const char *arc_platform_smp_cpuinfo(void)
* support needed.
*
* (2) In a SMP setup, the LLOCK/SCOND atomicity across CPUs needs to be
- * gaurantted by the platform (not something which core handles).
+ * guaranteed by the platform (not something which core handles).
* Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ
* disabling for atomicity.
*
diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h
index 4c530cf131f3..12daaf3a61ea 100644
--- a/arch/arc/include/asm/thread_info.h
+++ b/arch/arc/include/asm/thread_info.h
@@ -38,7 +38,7 @@
struct thread_info {
unsigned long flags; /* low level flags */
unsigned long ksp; /* kernel mode stack top in __switch_to */
- int preempt_count; /* 0 => preemptable, <0 => BUG */
+ int preempt_count; /* 0 => preemptible, <0 => BUG */
int cpu; /* current CPU */
unsigned long thr_ptr; /* TLS ptr */
struct task_struct *task; /* main task structure */
diff --git a/arch/arc/include/uapi/asm/swab.h b/arch/arc/include/uapi/asm/swab.h
index 02109cd48ee1..8d1f1ef44ba7 100644
--- a/arch/arc/include/uapi/asm/swab.h
+++ b/arch/arc/include/uapi/asm/swab.h
@@ -62,7 +62,7 @@
* 8051fdc4: st r2,[r1,20] ; Mem op : save result back to mem
*
* Joern suggested a better "C" algorithm which is great since
- * (1) It is portable to any architecure
+ * (1) It is portable to any architecture
* (2) At the same time it takes advantage of ARC ISA (rotate intrns)
*/

diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S
index 2e49c81c8086..e238b5fd3c8c 100644
--- a/arch/arc/kernel/entry-arcv2.S
+++ b/arch/arc/kernel/entry-arcv2.S
@@ -5,7 +5,7 @@
* Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
*/

-#include <linux/linkage.h> /* ARC_{EXTRY,EXIT} */
+#include <linux/linkage.h> /* ARC_{ENTRY,EXIT} */
#include <asm/entry.h> /* SAVE_ALL_{INT1,INT2,TRAP...} */
#include <asm/errno.h>
#include <asm/arcregs.h>
@@ -31,7 +31,7 @@ VECTOR res_service ; Reset Vector
VECTOR mem_service ; Mem exception
VECTOR instr_service ; Instrn Error
VECTOR EV_MachineCheck ; Fatal Machine check
-VECTOR EV_TLBMissI ; Intruction TLB miss
+VECTOR EV_TLBMissI ; Instruction TLB miss
VECTOR EV_TLBMissD ; Data TLB miss
VECTOR EV_TLBProtV ; Protection Violation
VECTOR EV_PrivilegeV ; Privilege Violation
@@ -76,11 +76,11 @@ ENTRY(handle_interrupt)
# query in hard ISR path would return false (since .IE is set) which would
# trips genirq interrupt handling asserts.
#
- # So do a "soft" disable of interrutps here.
+ # So do a "soft" disable of interrupts here.
#
# Note this disable is only for consistent book-keeping as further interrupts
# will be disabled anyways even w/o this. Hardware tracks active interrupts
- # seperately in AUX_IRQ_ACT.active and will not take new interrupts
+ # separately in AUX_IRQ_ACT.active and will not take new interrupts
# unless this one returns (or higher prio becomes pending in 2-prio scheme)

IRQ_DISABLE
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 089f6680518f..3c7e74aba679 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -95,7 +95,7 @@ ENTRY(EV_MachineCheck)
lr r0, [efa]
mov r1, sp

- ; MC excpetions disable MMU
+ ; MC exceptions disable MMU
ARC_MMU_REENABLE r3

lsr r3, r10, 8
@@ -209,7 +209,7 @@ trap_with_param:

; ---------------------------------------------
; syscall TRAP
-; ABI: (r0-r7) upto 8 args, (r8) syscall number
+; ABI: (r0-r7) up to 8 args, (r8) syscall number
; ---------------------------------------------

ENTRY(EV_Trap)
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
index 9152782444b5..8d541f53fae3 100644
--- a/arch/arc/kernel/head.S
+++ b/arch/arc/kernel/head.S
@@ -165,7 +165,7 @@ ENTRY(first_lines_of_secondary)
; setup stack (fp, sp)
mov fp, 0

- ; set it's stack base to tsk->thread_info bottom
+ ; set its stack base to tsk->thread_info bottom
GET_TSK_STACK_BASE r0, sp

j start_kernel_secondary
diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
index 678898757e47..f324f0e3341a 100644
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -56,7 +56,7 @@ void arc_init_IRQ(void)
WRITE_AUX(AUX_IRQ_CTRL, ictrl);

/*
- * ARCv2 core intc provides multiple interrupt priorities (upto 16).
+ * ARCv2 core intc provides multiple interrupt priorities (up to 16).
* Typical builds though have only two levels (0-high, 1-low)
* Linux by default uses lower prio 1 for most irqs, reserving 0 for
* NMI style interrupts in future (say perf)
diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c
index adff957962da..6e5a651cd75c 100644
--- a/arch/arc/kernel/perf_event.c
+++ b/arch/arc/kernel/perf_event.c
@@ -38,7 +38,7 @@
* (based on a specific RTL build)
* Below is the static map between perf generic/arc specific event_id and
* h/w condition names.
- * At the time of probe, we loop thru each index and find it's name to
+ * At the time of probe, we loop thru each index and find its name to
* complete the mapping of perf event_id to h/w index as latter is needed
* to program the counter really
*/
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 4dcf8589b708..cbe0b678811e 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -392,7 +392,7 @@ static void arc_chk_core_config(struct cpuinfo_arc *info)
#ifdef CONFIG_ARC_HAS_DCCM
/*
* DCCM can be arbit placed in hardware.
- * Make sure it's placement/sz matches what Linux is built with
+ * Make sure its placement/sz matches what Linux is built with
*/
if ((unsigned int)__arc_dccm_base != info->dccm.base)
panic("Linux built with incorrect DCCM Base address\n");
diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c
index 0b3bb529d246..5414d9f5c40c 100644
--- a/arch/arc/kernel/signal.c
+++ b/arch/arc/kernel/signal.c
@@ -9,7 +9,7 @@
* vineetg: Nov 2009 (Everything needed for TIF_RESTORE_SIGMASK)
* -do_signal() supports TIF_RESTORE_SIGMASK
* -do_signal() no loner needs oldset, required by OLD sys_sigsuspend
- * -sys_rt_sigsuspend() now comes from generic code, so discard arch implemen
+ * -sys_rt_sigsuspend() now comes from generic code, so discard arch implement
* -sys_sigsuspend() no longer needs to fudge ptregs, hence that arg removed
* -sys_sigsuspend() no longer loops for do_signal(), sets TIF_xxx and leaves
* the job to do_signal()
diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c
index 9b9570b79362..a19751e824fb 100644
--- a/arch/arc/kernel/traps.c
+++ b/arch/arc/kernel/traps.c
@@ -89,7 +89,7 @@ int do_misaligned_access(unsigned long address, struct pt_regs *regs,

/*
* Entry point for miscll errors such as Nested Exceptions
- * -Duplicate TLB entry is handled seperately though
+ * -Duplicate TLB entry is handled separately though
*/
void do_machine_check_fault(unsigned long address, struct pt_regs *regs)
{
diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S
index 549c3f407918..61a1b2b96e1d 100644
--- a/arch/arc/kernel/vmlinux.lds.S
+++ b/arch/arc/kernel/vmlinux.lds.S
@@ -41,8 +41,8 @@ SECTIONS
#endif

/*
- * The reason for having a seperate subsection .init.ramfs is to
- * prevent objump from including it in kernel dumps
+ * The reason for having a separate subsection .init.ramfs is to
+ * prevent objdump from including it in kernel dumps
*
* Reason for having .init.ramfs above .init is to make sure that the
* binary blob is tucked away to one side, reducing the displacement
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index e054780a8fe0..dc65e87a531f 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -5,19 +5,19 @@
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* Vineetg: April 2011 :
- * -MMU v1: moved out legacy code into a seperate file
+ * -MMU v1: moved out legacy code into a separate file
* -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore,
* helps avoid a shift when preparing PD0 from PTE
*
* Vineetg: July 2009
- * -For MMU V2, we need not do heuristics at the time of commiting a D-TLB
- * entry, so that it doesn't knock out it's I-TLB entry
+ * -For MMU V2, we need not do heuristics at the time of committing a D-TLB
+ * entry, so that it doesn't knock out its I-TLB entry
* -Some more fine tuning:
* bmsk instead of add, asl.cc instead of branch, delay slot utilise etc
*
* Vineetg: July 2009
* -Practically rewrote the I/D TLB Miss handlers
- * Now 40 and 135 instructions a peice as compared to 131 and 449 resp.
+ * Now 40 and 135 instructions apiece as compared to 131 and 449 resp.
* Hence Leaner by 1.5 K
* Used Conditional arithmetic to replace excessive branching
* Also used short instructions wherever possible
--
2.34.1

Next message: Bjorn Helgaas: "[PATCH 3/8] arm64: Fix typos"
Previous message: Bjorn Helgaas: "[PATCH 1/8] alpha: Fix typos"
In reply to: Randy Dunlap: "Re: [PATCH 1/8] alpha: Fix typos"
Next in thread: Randy Dunlap: "Re: [PATCH 2/8] ARC: Fix typos"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]