Re: [PATCH v8 3/3] remoteproc: zynqmp: parse TCM from device tree

[Tanmay Shah]

On 1/3/24 12:17 PM, Mathieu Poirier wrote:
> On Fri, Dec 15, 2023 at 03:57:25PM -0800, Tanmay Shah wrote:
> > ZynqMP TCM information is fixed in driver. Now ZynqMP TCM information
>
> s/"is fixed in driver"/"was fixed in driver"
>
> > is available in device-tree. Parse TCM information in driver
> > as per new bindings.
> > 
> > Signed-off-by: Tanmay Shah <tanmay.shah@xxxxxxx>
> > ---
> > 
> > Changes in v8:
> >   - parse power-domains property from device-tree and use EEMI calls
> >     to power on/off TCM instead of using pm domains framework
> >   - Remove checking of pm_domain_id validation to power on/off tcm
> >   - Remove spurious change
> > 
> > Changes in v7:
> >   - move checking of pm_domain_id from previous patch
> >   - fix mem_bank_data memory allocation
> > 
> >  drivers/remoteproc/xlnx_r5_remoteproc.c | 154 +++++++++++++++++++++++-
> >  1 file changed, 148 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c
> > index 4395edea9a64..36d73dcd93f0 100644
> > --- a/drivers/remoteproc/xlnx_r5_remoteproc.c
> > +++ b/drivers/remoteproc/xlnx_r5_remoteproc.c
> > @@ -74,8 +74,8 @@ struct mbox_info {
> >  };
> >  
> >  /*
> > - * Hardcoded TCM bank values. This will be removed once TCM bindings are
> > - * accepted for system-dt specifications and upstreamed in linux kernel
> > + * Hardcoded TCM bank values. This will stay in driver to maintain backward
> > + * compatibility with device-tree that does not have TCM information.
> >   */
> >  static const struct mem_bank_data zynqmp_tcm_banks_split[] = {
> >  	{0xffe00000UL, 0x0, 0x10000UL, PD_R5_0_ATCM, "atcm0"}, /* TCM 64KB each */
> > @@ -878,6 +878,139 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev)
> >  	return ERR_PTR(ret);
> >  }
> >  
> > +static int zynqmp_r5_get_tcm_node_from_dt(struct zynqmp_r5_cluster *cluster)
> > +{
> > +	struct of_phandle_args out_args;
> > +	int tcm_reg_per_r5, tcm_pd_idx;
> > +	struct zynqmp_r5_core *r5_core;
> > +	int i, j, tcm_bank_count, ret;
> > +	struct platform_device *cpdev;
> > +	struct mem_bank_data *tcm;
> > +	struct device_node *np;
> > +	struct resource *res;
> > +	u64 abs_addr, size;
> > +	struct device *dev;
> > +
> > +	for (i = 0; i < cluster->core_count; i++) {
> > +		r5_core = cluster->r5_cores[i];
> > +		dev = r5_core->dev;
> > +		np = of_node_get(dev_of_node(dev));
> > +		tcm_pd_idx = 1;
> > +
> > +		/* we have address cell 2 and size cell as 2 */
> > +		tcm_reg_per_r5 = of_property_count_elems_of_size(np, "reg",
> > +								 4 * sizeof(u32));
> > +		if (tcm_reg_per_r5 <= 0) {
> > +			dev_err(dev, "can't get reg property err %d\n", tcm_reg_per_r5);
> > +			return -EINVAL;
> > +		}
> > +
> > +		/*
> > +		 * In lockstep mode, r5 core 0 will use r5 core 1 TCM
> > +		 * power domains as well. so allocate twice of per core TCM
>
> Twice of what?  Please use proper english in your multi line comments, i.e a
> capital letter for the first word and a dot at the end.  
>
> > +		 */
> > +		if (cluster->mode == LOCKSTEP_MODE)
> > +			tcm_bank_count = tcm_reg_per_r5 * 2;
> > +		else
> > +			tcm_bank_count = tcm_reg_per_r5;
> > +
> > +		r5_core->tcm_banks = devm_kcalloc(dev, tcm_bank_count,
> > +						  sizeof(struct mem_bank_data *),
> > +						  GFP_KERNEL);
> > +		if (!r5_core->tcm_banks)
> > +			ret = -ENOMEM;
> > +
> > +		r5_core->tcm_bank_count = tcm_bank_count;
> > +		for (j = 0; j < tcm_bank_count; j++) {
> > +			tcm = devm_kzalloc(dev, sizeof(struct mem_bank_data),
> > +					   GFP_KERNEL);
> > +			if (!tcm)
> > +				return -ENOMEM;
> > +
> > +			r5_core->tcm_banks[j] = tcm;
> > +
> > +			/*
> > +			 * In lockstep mode, get second core's TCM power domains id
> > +			 * after first core TCM parsing is done as
>
> There seems to be words missing at the end of the sentence, and there is no dot.
>
> > +			 */
> > +			if (j == tcm_reg_per_r5) {
> > +				/* dec first core node */
> > +				of_node_put(np);
> > +
> > +				/* get second core node */
> > +				np = of_get_next_child(cluster->dev->of_node, np);
> > +
> > +				/*
> > +				 * reset index of power-domains property list
> > +				 * for second core
> > +				 */
> > +				tcm_pd_idx = 1;
> > +			}
> > +
> > +			/* get power-domains id of tcm */
> > +			ret = of_parse_phandle_with_args(np, "power-domains",
> > +							 "#power-domain-cells",
> > +							 tcm_pd_idx,
> > +							 &out_args);
> > +			if (ret) {
> > +				dev_err(r5_core->dev,
> > +					"failed to get tcm %d pm domain, ret %d\n",
> > +					j, ret);
> > +				of_node_put(out_args.np);
>
> I'm pretty sure this isn't needed in error conditions since @out_args would not
> have been assigned.
>
> > +				return ret;
> > +			}
> > +			tcm->pm_domain_id = out_args.args[0];
> > +			of_node_put(out_args.np);
> > +			tcm_pd_idx++;
> > +
> > +			/*
> > +			 * In lockstep mode, we only need second core's power domain
> > +			 * ids. Other information from second core isn't needed so
> > +			 * ignore it. This forms table as zynqmp_tcm_banks_lockstep
>
> I don't understand the last sentence of this comment and it is missing a dot at
> the end.  Comments should be enlightening, the ones I found in this patch are
> sowing confusion.  
>
> > +			 */
> > +			if (j >= tcm_reg_per_r5)
> > +				contiue;
> > +
>
> This condition and the one above (j == tcm_reg_per_r5) is brittle and almost
> guaranteed to cause maintenance problems in the future.
>
> I understand your will to reuse as much code as possible but this is one of the
> rare cases where duplicating code is probably better.  Please introduce two new
> functions, i.e zynqmp_r5_get_tcm_node_from_dt_split() and
> zynqmp_r5_get_tcm_node_from_dt_lockstep(), and do all the necessary processing
> based on the use case.

Ack will fix the documentation and tcm parsing as suggested.


> Thanks,
> Mathieu
>
> > +			/* get tcm address without translation */
> > +			ret = of_property_read_reg(np, j, &abs_addr, &size);
> > +			if (ret) {
> > +				of_node_put(np);
> > +				dev_err(dev, "failed to get reg property\n");
> > +				return ret;
> > +			}
> > +
> > +			/*
> > +			 * remote processor can address only 32 bits
> > +			 * so convert 64-bits into 32-bits. This will discard
> > +			 * any unwanted upper 32-bits.
> > +			 */
> > +			tcm->da = (u32)abs_addr;
> > +			tcm->size = (u32)size;
> > +
> > +			cpdev = to_platform_device(dev);
> > +			res = platform_get_resource(cpdev, IORESOURCE_MEM, j);
> > +			if (!res) {
> > +				of_node_put(np);
> > +				dev_err(dev, "failed to get tcm resource\n");
> > +				return -EINVAL;
> > +			}
> > +
> > +			tcm->addr = (u32)res->start;
> > +			tcm->bank_name = (char *)res->name;
> > +			res = devm_request_mem_region(dev, tcm->addr, tcm->size,
> > +						      tcm->bank_name);
> > +			if (!res) {
> > +				dev_err(dev, "failed to request tcm resource\n");
> > +				of_node_put(np);
> > +				return -EINVAL;
> > +			}
> > +		}
> > +	}
> > +
> > +	of_node_put(np);
> > +	return 0;
> > +}
> > +
> >  /**
> >   * zynqmp_r5_get_tcm_node()
> >   * Ideally this function should parse tcm node and store information
> > @@ -956,10 +1089,19 @@ static int zynqmp_r5_core_init(struct zynqmp_r5_cluster *cluster,
> >  	struct zynqmp_r5_core *r5_core;
> >  	int ret, i;
> >  
> > -	ret = zynqmp_r5_get_tcm_node(cluster);
> > -	if (ret < 0) {
> > -		dev_err(dev, "can't get tcm node, err %d\n", ret);
> > -		return ret;
> > +	r5_core = cluster->r5_cores[0];
> > +	if (of_find_property(r5_core->np, "reg", NULL)) {
> > +		ret = zynqmp_r5_get_tcm_node_from_dt(cluster);
> > +		if (ret) {
> > +			dev_err(dev, "can't get tcm node from dt, err %d\n", ret);
> > +			return ret;
> > +		}
> > +	} else {
> > +		ret = zynqmp_r5_get_tcm_node(cluster);
> > +		if (ret < 0) {
> > +			dev_err(dev, "can't get tcm node, err %d\n", ret);
> > +			return ret;
> > +		}
> >  	}
> >  
> >  	for (i = 0; i < cluster->core_count; i++) {
> > -- 
> > 2.25.1
> >